Latest Components

Memory Xplorer SPI Daughter Board

Manufacturer

Part #

Category

Microchip Technology EV34X05A Semiconductors

Description

The EV34X05A Memory Xplorer SPI Daughter Board provides a hardware interface for configuring and evaluating Microchip SPI Serial EEPROMs. It operates with the EV60D49A Memory Xplorer Base Board and Memory Xplorer software for memory programming, verification, and feature testing.

25CSM01 1Mbit SPI Serial EEPROM

Manufacturer

Part #

Category

Microchip Technology 25CSM01 Semiconductors

Description

The Microchip Technology 25CSM01 is a 1Mbit SPI serial EEPROM organized as 131,072 bytes x 8 for nonvolatile data storage. It supports byte and sequential reads, byte and page writes, built-in ECC, enhanced write protection, a factory-programmed 128-bit serial number, and a user-programmable ID page. The device operates from 1.7V to 5.5V and is available in compact 8-pin and 8-ball packages.

Memory Xplorer Single-Wire Daughter Board

Manufacturer

Part #

Category

Microchip Technology EV08L40A Semiconductors

Description

The EV08L40A is a Memory Xplorer single-wire daughter board for evaluating and configuring Microchip Serial EEPROMs. It interfaces with the EV60D49A Memory Xplorer Base Board and supports memory feature testing across a 1.7V to 5.5V supply range.

OTTO T6 Sealed Magnetic Switches

Manufacturer

Part #

Category

OTTO T6 Passives

Description

Military-grade, environmentally sealed magnetic toggle switches designed for aerospace, military, and heavy-duty industrial flight decks. The T6 series uses an internal solenoid to maintain the switch position until released by an external remote circuit. Available in single- and double-pole configurations with two- or three-position momentary or maintained action.

Evaluation Kits for EiceDRIVER™ 2EDN Gate Drivers

Manufacturer

Part #

Category

Infineon Technologies KIT_DRIVER_2EDN7534B, KIT_DRIVER_2EDN7534U, KIT_DRIVER_2EDN7534F Semiconductors

Description

Evaluation kits providing a test platform for Infineon EiceDRIVER™ 2EDN dual-channel, non-isolated gate driver ICs. The kits support two low-side MOSFETs and are suitable for SMPS, DC-DC converters, synchronous rectification, and power factor correction applications.

TLF4Dx OPTIREG™ PMICs

Manufacturer

Part #

Category

Infineon Technologies TLF4D985QX Semiconductors

Description

High-efficiency, multi-rail automotive power management ICs supporting systems up to ASIL D. The devices feature a 3.8V to 60V input range, a configurable 7A multiphase synchronous buck converter, low-dropout regulators, voltage monitoring, and safety functions. They are AEC-Q100 Grade 0 qualified for high-temperature automotive applications.

XENSIV™ TLE55493 Wheel Speed Sensors

Manufacturer

Part #

Category

Infineon Technologies TLE55493 Sensors

Description

The Infineon Technologies XENSIV™ TLE55493 wheel speed sensors measure rotational speed with high accuracy for anti-lock braking systems and indirect tire pressure monitoring. They provide robust performance against magnetic field disturbances, vibration, and harsh automotive environmental conditions. The sensors are AEC-Q100 Grade-qualified and support safety requirements up to ASIL D.

TOBA-B-25 25mm Chip-on-Board (COB) Connector

Manufacturer

Part #

Category

Ledil TOBA-B-25 Connectors

Description

The Ledil TOBA-B-25 is a compact 25mm COB connector with pre-installed wires for quick, tool-free assembly. It features a twist-and-lock mechanical interface and is compatible with YASMEEN-25 COB modules.

iC-MU Magnetic Off-Axis Position Encoders

Manufacturer

Part #

Category

iC-Haus iC-MU Sensors

Description

Magnetic off-axis position encoder ICs with integrated Hall sensors for two-track scanning and absolute position measurement within one mechanical revolution. They provide 12-bit sine/digital conversion, serial SPI, BiSS, and SSI interfaces, incremental ABZ outputs, and support single-turn and multiturn encoder applications.

IQB150W8 Quarter-Brick DC-DC Converters

Manufacturer

Part #

Category

MEAN WELL IQB150W8 Power

Description

The MEAN WELL IQB150W8 is an isolated, regulated 150W DC-DC converter in an industry-standard quarter-brick module format. It supports an ultra-wide 9VDC to 75VDC input range and single outputs from 5V to 48V, with remote ON/OFF, remote sense, output trim, and integrated protection functions.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 530