Latest Components
Manufacturer
Part #
Category
Banner Engineering S100 OptoelectronicsDescription
Compact point-of-use operator interfaces combining configurable multitouch input, two-line text messaging, 16 configurable RGB LEDs, audible alerts, and haptic feedback. The IP69K-rated displays support discrete I/O, IO-Link, and Modbus integration for automated manufacturing applications.
Manufacturer
Part #
Category
Hirose Electric ZE05 ConnectorsDescription
Hybrid automotive connectors combining 0.5mm tab, 2mm pitch signal contacts with 1.5mm tab, 3mm pitch power contacts. They provide rated currents of 2A for signal contacts and 10A for power contacts, with high vibration resistance and operation up to +125°C.
Manufacturer
Part #
Category
Panasonic Industry HE-S SC-Type (AHES3591, AHES3592, AHES4591, AHES4592) PowerDescription
Panasonic Industry HE-S SC-Type power relays provide 40A switching at up to 480VAC in a compact PCB-mountable package. They offer 2 Form A or 2 Form A 1 Form B contact arrangements, 12VDC or 24VDC coils, mirror-contact monitoring, and low 400mW holding power for EV charging, renewable energy, and industrial applications.
Manufacturer
Part #
Category
Lantronix FOX5 (F54R000S/F54R00FS) SemiconductorsDescription
Secure 4G LTE Cat 1 bis intelligent gateways for edge-to-cloud connectivity, critical asset monitoring, industrial equipment, and vehicle telematics. Features include GNSS with dead reckoning, BLE 5.4, Modbus/BACnet/CAN bus support, programmable I/O, edge processing, and secure remote device management.
Manufacturer
Part #
Category
STMicroelectronics STEVAL-PDUBV1 PowerDescription
The STEVAL-PDUBV1 is an automotive power distribution electronic control unit based on the SPC58NG84E7 MCU and STi²Fuse devices. It provides two independent 12V power rails with 13 protected output channels per rail and supports intelligent distribution of power to automotive loads.
Manufacturer
Part #
Category
STMicroelectronics AEK-POW-PDUMINI PowerDescription
The AEK-POW-PDUMINI is a compact automotive power distribution unit board for managing and protecting low-voltage 12V and 48V vehicle power systems. It uses eFuse-protected high-side drivers, SPI control, standby power management, and CAN-FD wake-up functionality to distribute power closer to vehicle loads.
Manufacturer
Part #
Category
STMicroelectronics AEK-MOT-8DCMH98 PowerDescription
The STMicroelectronics AEK-MOT-8DCMH98 is a DC motor driver board based on the L99MH98 octal half-bridge predriver. It drives eight configurable half-bridge channels or four full-bridge channels, supporting up to 15A per channel in half-bridge mode and 30A per channel in full-bridge mode. The board provides current measurement, SPI diagnostics, supply monitoring, and automotive protection features.
Manufacturer
Part #
Category
MEAN WELL MSP-1600 PowerDescription
The MEAN WELL MSP-1600 is a 1600W enclosed AC/DC power supply with power factor correction, programmable output voltage, CANBus communication, remote control, remote sensing, and an auxiliary 12VDC output. It accepts 85VAC to 264VAC input and is available with 12V, 24V, 36V, or 48V outputs. Integrated protections include short circuit, overload, overvoltage, and overtemperature protection.
Manufacturer
Part #
Category
Abracon O-C14AL SemiconductorsDescription
Low phase noise oven-controlled crystal oscillators featuring an SC-cut crystal, ±5 ppb frequency stability from -40°C to +85°C, and 65 mA steady-state current. These compact devices provide sine-wave or CMOS/TTL outputs, voltage control, fast warm-up, and low power consumption.
Manufacturer
Part #
Category
Axiomtek CEM570 SemiconductorsDescription
Axiomtek CEM570 COM Express Type 6 Modules are compact computer-on-modules based on Intel Core Ultra processors for embedded and edge computing applications. They support dual-channel DDR5 memory, PCIe, SATA, USB, NVMe storage, and TPM 2.0 in a standardized COM Express Type 6 form factor.
