Latest Components
Manufacturer
Part #
Category
Vishay / Dale WSKP0612 PassivesDescription
Vishay / Dale WSKP0612 Power Metal Strip® Resistors utilize a proprietary processing technique to achieve low resistance values. These surface-mount resistors offer a power rating of 3.5W to 5W, with tolerances of 1.0±% and 5.0±%. They are AEC-Q200 qualified and suitable for applications such as current sensing and voltage division.
Manufacturer
Part #
Category
Proterial FT-3TL PassivesDescription
Proterial FINEMET® FT-3TL Non-Cut Cores utilize nanocrystal soft magnetic material, ensuring a lower loss of 1/3 to 1/4 compared to the F3CC series. They feature a high saturation magnetic flux density, resulting in a smaller size and lighter weight for high-frequency transformers. Available in different sizes, these cores are designed to meet various project needs.
Manufacturer
Part #
Category
Vishay RNC55 PassivesDescription
Vishay RNC55 Metal Film Resistors are MIL-PRF-55182 qualified and offer a very low noise rating of -40dB. They feature an epoxy coating for superior moisture protection and a verified failure rate. With a maximum working voltage of 350V and tolerances of ±0.1%, ±0.5%, and ±1%, these resistors are ideal for precision applications.
Manufacturer
Part #
Category
Bourns CR01005A-AS PassivesDescription
Bourns CR01005A-AS AEC-Q200 Chip Resistors offer a sulfur-resistant design in an extremely small package size of only 0.4mm x 0.2mm x 0.13mm. These robust resistors provide enhanced resistance to corrosion-related failures, improving system stability and reliability. Ideal for applications requiring miniaturization and high reliability, they are suitable for harsh environments such as transportation and wearable devices.
Manufacturer
Part #
Category
TE Connectivity FWFU PassivesDescription
TE Connectivity's Holsworthy FWFU Fusible Wire Wound Fixed Resistors are a special type of resistor that also acts as a safety fuse. They allow current to flow normally but break the circuit when the current exceeds a safe level, protecting electronic devices from damage. These resistors are commonly used in power supplies, chargers, and household appliances to help prevent overheating and short circuits.
Manufacturer
Part #
Category
Taoglas SGGP & SGPDF PassivesDescription
Taoglas SGGP and SGPDF GPS / GLONASS / Galileo / BeiDou Antennas are compact ceramic passive patch antennas designed for space-constrained applications. They feature a low-profile design and are optimized for a 50mm x 50mm ground plane, making them ideal for wearables and navigation devices. Both series are RoHS and REACH compliant, ensuring durability and performance.
Manufacturer
Part #
Category
Taoglas DSGP PassivesDescription
Taoglas DSGP GPS / Galileo / BeiDou Antennas are designed for space-constrained applications with a low-profile height of 2mm or 4mm. These SMT mountable ceramic passive patch antennas feature an additional solder mask for enhanced durability. They are optimized for a 50mm x 50mm ground plane and are compliant with RoHS and REACH standards.
Manufacturer
Part #
Category
Abracon AMELH4030S PassivesDescription
Abracon AMELH4030S Power Inductors are flat wire/hot-press molded power inductors with inductance ranging from 0.13μH to 8.2μH. These inductors feature low DCR, high saturation current, and ultra-low AC losses, making them suitable for consumer electronics, industrial electronics, and telecom equipment. They provide improved efficiency and thermal performance, supporting higher load currents and superior EMI suppression.
Manufacturer
Part #
Category
Abracon ASH5KW PassivesDescription
Abracon ASH5KW Low-Power Crystal Oscillators operate at 32.768kHz frequency with a CMOS output and ±20ppm frequency tolerance. They feature low current consumption and a supply voltage range of 1.6V to 5.5V. Ideal for IoT, consumer electronics, and industrial applications, these oscillators come in a compact hermetically sealed ceramic package.
Manufacturer
Part #
Category
Vishay / Dale IHXL1500VZ-31 PassivesDescription
Vishay / Dale IHXL1500VZ-31 Commercial Through-Hole Inductors handle high currents and feature a high-temperature rating of up to +155°C. They are designed with improved core material for a 20% reduction in core loss and provide excellent magnetic shielding. These inductors are suitable for applications such as high-current battery charging and brushless DC motors.
