Latest Components
Manufacturer
Part #
Category
STMicroelectronics STDRIVEG210 PowerDescription
STMicroelectronics STDRIVEG210 Half-Bridge Gate Drivers are designed for N-channel enhancement mode GaN, with a high-side driver section that withstands up to 220V. They feature high current capability, short propagation delay, and integrated LDOs, making them ideal for high-speed GaN applications. These drivers are optimized for various applications including DC/DC, AC/DC, and LED lighting.
Manufacturer
Part #
Category
Texas Instruments TCAN284x-Q1 PowerDescription
The Texas Instruments TCAN284x-Q1 CAN FD System Basis Chips provide a flexible data rate capable transceiver that supports selective wake. It includes a LIN transceiver and features multiple regulators for power management. This device is AEC-Q100 qualified for automotive applications and offers advanced diagnostics and protection features.
Manufacturer
Part #
Category
Texas Instruments TPD4S201-Q1 PowerDescription
The Texas Instruments TPD4S201-Q1 USB Type-C® Port Protector IC is a single-chip solution that provides IEC ESD and 28V short-to-VBUS overvoltage protection. It ensures that the CC and SBU pins are 28V tolerant, safeguarding against potential shorts caused by mechanical stress or environmental factors. This device is ideal for automotive applications requiring robust protection for USB Type-C connectors.
Manufacturer
Part #
Category
Renesas Electronics EK-RA2L2 PowerDescription
The Renesas Electronics EK-RA2L2 Evaluation Kit provides an entry point for evaluation, prototyping, and development with the RA2L2 MCU. It incorporates an emulator circuit that can be used without any hardware tools and includes breakout pin headers for easy access to all MCU signals. This kit is ideal for applications such as USB data loggers and EV chargers.
Manufacturer
Part #
Category
Texas Instruments TCAN245x-Q1 PowerDescription
The Texas Instruments TCAN245x-Q1 is a Signal Improvement Capable (SIC) CAN FD System Basis Chip (SBC) that supports data rates up to 8Mbps. It integrates a buck regulator that can output either 3.3V or 5V with a maximum output current of 1A, along with a 5V LDO for additional loads. This device is AEC-Q100 qualified for automotive applications and includes features for selective wakeup and fault diagnostics.
Manufacturer
Part #
Category
Texas Instruments TPD4S48x-Q1 PowerDescription
Texas Instruments TPD4S48x-Q1 USB Type-C® Port Protector ICs are single-chip USB Type-C port protection ICs that provide IEC ESD and 48V short-to-VBUS overvoltage protection. They enable the CC and SBU or USB2 pins to be 48V tolerant without interfering with normal operation by providing over-voltage protection. The device integrates IEC 61000-4-2 ESD protection for external pins, eliminating the need for additional high-voltage TVS diodes.
Manufacturer
Part #
Category
Microchip Technology dsPIC33AK512MPS512 PowerDescription
The Microchip Technology dsPIC33AK512MPS512 General Purpose Dual In-Line Module (DIM) is designed to demonstrate the capabilities of the dsPIC33AK512MPS512 Digital Signal Controllers using the dsPIC33A Curiosity Platform Development Board. It features a keyed design with reduced socketing insertion force for correct board orientation.
Manufacturer
Part #
Category
Arduino ABX00137 PowerDescription
The Arduino ABX00137 Nano Matter Board is a compact development board designed for Matter and Thread-based IoT applications. It features a 32-bit Arm Cortex-M33 CPU with 1536kB Flash and 256kB RAM, supporting various wireless protocols including BLE and Zigbee. This board is ideal for developers looking to create secure, connected devices in small form factors.
Manufacturer
Part #
Category
onsemi NXH600N10x PowerDescription
onsemi NXH600N10x 3-Level Neutral Point Clamped (NPC) Inverter Modules are optimized for industrial and renewable energy applications. These power modules integrate IGBTs and Fast Recovery Diodes to provide lower conduction and switching losses, ensuring high efficiency and reliability. Ideal for demanding environments like solar inverters and motor drives, they support blocking voltages of 1000V or 1050V.
Manufacturer
Part #
Category
Arduino ABX00143 PowerDescription
The Arduino ABX00143 Nano R4 Dev Board with Headers is a compact and powerful development board that enhances the features of the ABX00142 Nano R4. It is based on the Renesas RA4M1 32-bit Arm Cortex-M4 processor, offering improved performance and integrated Wi-Fi via the ESP32-S3 module. This board is perfect for developers seeking a plug-and-play solution for easy prototyping and hardware connections.
