Latest Components
Manufacturer
Part #
Category
Lantronix 610-DEV-KIT PowerDescription
The Lantronix Open-Q™ 610 µSOM Development Kit is an exposed board platform powered by the Open-Q 610 µSOM, featuring the Qualcomm QCS610 SoC with a Neural Processing Engine for edge AI capabilities. It is designed for visual intelligence applications such as AI-connected cameras and machine vision systems. This versatile kit includes a carrier board and various accessories to facilitate product development.
Manufacturer
Part #
Category
Cosel PDA600 PowerDescription
Cosel PDA600 600W AD/DC Enclosed Power Supplies offer a maximum output power rating of 648W and dimensions of 120mm x 61mm x 190mm. These power supplies feature high efficiency, low noise, and various built-in protections. They are suitable for industrial robotics, factory automation equipment, and display devices.
Manufacturer
Part #
Category
Ezurio AW100PA-A-INT PowerDescription
Ezurio Aurawave AW100 Auracast™ Platform is designed for easy integration into existing hardware setups, suitable for both consumer and industrial applications. It enables wireless broadcasting of high-quality audio to multiple Bluetooth receivers simultaneously and integrates LE audio via a 40-pin header. The platform offers straightforward configuration and control of Bluetooth Auracast™ broadcasts via AT commands.
Manufacturer
Part #
Category
ROHM Semiconductor SCT2H12NWB PowerDescription
The ROHM Semiconductor SCT2H12NWB is a 1700V N-Channel SiC Power MOSFET with a continuous drain current rating of 3.9A. It features a low on-state resistance of 1.15mΩ and is designed for fast switching applications. This device is ideal for auxiliary and switch-mode power supply applications.
Manufacturer
Part #
Category
Texas Instruments LP8865C-Q1 PowerDescription
Texas Instruments LP8865C-Q1 Multi-Topology LED Drivers are low-cost, non-synchronous multi-topology solutions with a wide input range of 4.5V to 65V. These drivers integrate a low-side NMOS switch to efficiently drive LEDs with high power density. The family supports PWM and analog dimming, making it versatile for various automotive applications.
Manufacturer
Part #
Category
Orion Fans OA109Y PowerDescription
Orion Fans OA109Y Series Plastic Frame 120mm AC Fans feature 115V and 230V rated voltage, 110CFM maximum airflow, and 0.37 maximum static pressure. These fans are designed with an impedance-protected AC shaded pole motor and a dual ball bearing system, ensuring high performance and reliability. Typical applications include appliances, food equipment, and telecom systems.
Manufacturer
Part #
Category
CUI Inc DQD6 PowerDescription
CUI Inc DQD6 DC-DC Converters offer up to 6W isolated output, 1500VDC isolation, and a temperature range of -40°C to +85°C. These converters feature single- and dual-regulated outputs, remote on/off control, and various mounting options. They are ideal for ITE, commercial, and industrial applications.
Manufacturer
Part #
Category
CUI Inc DQD20 PowerDescription
CUI Inc DQD20 DC-DC Converters offer up to 20W isolated output, 1500VDC isolation, and an operating temperature range of -40°C to +85°C. These converters include various protections such as overvoltage and short circuit, along with remote on/off control. They are certified to IEC/EN 62368-1 standards, making them suitable for ITE, commercial, and industrial applications.
Manufacturer
Part #
Category
TDK EV160xA PowerDescription
TDK EV160xA μPOL Evaluation Boards are compact, high-efficiency evaluation platforms designed to demonstrate the performance of TDK’s μPOL DC-DC converters. These boards combine a high-frequency inductor and power IC into a single, low-profile module, enabling high power density and thermal performance. Ideal for powering FPGAs, ASICs, and other high-performance digital ICs.
Manufacturer
Part #
Category
Vishay Semiconductors VORA1150 PowerDescription
The Vishay Semiconductors VORA1150 Solid State Relay is an AEC-Q102 qualified 1 form A solid-state relay in a 4-pin SMD-8 package. It features 1500V load voltage, 50mA load current, and 100Ω typical on-resistance, providing reinforced isolation and RoHS compliance. Typical applications include battery isolation measurement in electric vehicles and solar panel leakage current detection.
