Latest Components
Manufacturer
Part #
Category
Texas Instruments TIEVM-MTR-HVINV PowerDescription
Texas Instruments TIEVM-MTR-HVINV MCU Evaluation Module (EVM) is a 750W development board for high-voltage motor drive applications. This evaluation module implements sensorless FOC control for a three-phase permanent-magnet synchronous motor (PMSM) with the InstaSPIN-FOC FAST and eSMO sensorless observers. The modular design allows plug-and-play support of different daughterboard attachments to the same motherboard.
Manufacturer
Part #
Category
Solidigm D5-P5336 PowerDescription
Solidigm D5-P5336 122.88TB Solid State Drives (SSDs) are powered by Arm® high-performance and power-efficient technology. These SSDs are designed to deliver improved storage efficiency from the core data center to the edge. The D5-P5336 SSDs feature improved power density and are ideal for data-intensive applications.
Manufacturer
Part #
Category
Qorvo QM45655 PowerDescription
The Qorvo QM45655 Wi-Fi® 7 Front End Module (FEM) is designed for Wi-Fi 7 (802.11be) systems, featuring a compact layout with integrated matching. It supports a wide supply voltage range and multiple TX modes to optimize output power and efficiency. This module integrates a power amplifier, ANT switch, and low-noise amplifier into a single device.
Manufacturer
Part #
Category
Texas Instruments LM3645 PowerDescription
The Texas Instruments LM3645 LED Driver IC is a synchronous boost quad LED flash driver with a 2A high-side current source, providing a high level of adjustability within a compact solution. It features quad-high-side current sources to regulate LED current over a 2.3V to 5.5V input voltage range and is ideal for applications such as camera phones and digital still cameras. The device operates in a temperature range of -40°C to 85°C and includes an I2C-compatible interface for control.
Manufacturer
Part #
Category
Texas Instruments LMK5C22212AS1 PowerDescription
The Texas Instruments LMK5C22212AS1 Network Synchronizer is a high-performance jitter cleaner designed for wireless communications and infrastructure applications. It features two DPLLs for hitless switching and jitter attenuation, with programmable loop bandwidth and no external loop filters. This device is fully programmable through SPI or I2C and includes integrated EEPROM for customizable system start-up clocks.
Manufacturer
Part #
Category
Texas Instruments bq25186 PowerDescription
The Texas Instruments bq25186 Linear Battery Charger IC focuses on a small solution size and low quiescent current to extend battery life. It supports up to 1A charging and system loads of up to 3A, making it ideal for various applications. The device is optimized for battery-to-battery charging and integrates features for thermal regulation and fault protection.
Manufacturer
Part #
Category
Texas Instruments LMR516x5 PowerDescription
Texas Instruments LMR516x5 Synchronous Buck Converters can drive up to 2.5A or 3.5A load current. With an input range of 4.3V to 60V, the devices are designed for various industrial applications requiring power conditioning from an unregulated source. The device features built-in protection and operates at 400kHz or 1.1MHz switching frequency for optimized design size.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVL1608-TL-00A PowerDescription
The EVL1608-TL-00A Evaluation Board is designed to evaluate the MP1608 step-down switch-mode converter with built-in internal power MOSFETs. It can achieve up to 6A of continuous output current from a 2.4V to 5.5V input voltage range. This board is ideal for applications such as IP cameras, notebooks, and battery-powered devices.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EV5470B-L-00A PowerDescription
The Monolithic Power Systems (MPS) EV5470B-L-00A Evaluation Board is designed to evaluate the performance of the MP5470B power management solution, which integrates four high-efficiency, step-down DC/DC converters. It features Constant-on-Time (COT) control for fast transient response and includes full protection features such as Under-Voltage Lockout and Over-Current Protection. Ideal for applications like enterprise SSD and FPGA-based designs, this board supports a flexible power on/off sequence.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVQ6600L-R-00A PowerDescription
The Monolithic Power Systems (MPS) EVQ6600L-R-00A Evaluation Board is designed to evaluate the capabilities of the MPQ6600L-AEC1 stepper motor driver, which features a built-in micro-stepping translator. It operates from a supply voltage of up to 35V and can deliver motor currents of up to 1.5A. This evaluation board is suitable for applications involving bipolar stepper motors and printers.
