Latest Components
Manufacturer
Part #
Category
Kingston OM8SGP4 PowerDescription
Kingston OM8SGP4 NVMe Solid State Drives (SSDs) are high-performance storage solutions built on the PCIe Gen 4x4 NVMe 1.4 interface, offering exceptional speed and reliability for a variety of applications. Available in capacities up to 2TB, these M.2 2280 form factor drives deliver sequential read speeds up to 7000MB/s and write speeds up to 6000MB/s. Designed with advanced features like thermal throttling protection and power loss protection, the Kingston OM8SGP4 series ensures data integrity and consistent performance even under intensive use.
Manufacturer
Part #
Category
Analog Devices Inc. EV-AD74416H-ARDZ PowerDescription
The EV-AD74416H-ARDZ Evaluation Board is designed to showcase the capabilities of the AD74416H quad-channel, software-configurable I/O device for industrial control applications. It features a custom power solution and supports various analog and digital I/O configurations. This robust platform enables full control and data acquisition through PC-based software.
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-LT8210-1-AZ PowerDescription
The EVAL-LT8210-1-AZ Evaluation Board is designed to demonstrate the performance of the LT8210-1 100V bidirectional buck-boost DC/DC controller. It supports seamless transitions between buck, boost, and buck-boost modes, making it suitable for a variety of applications. The board features a robust layout and includes onboard components for easy configuration of operating parameters.
Manufacturer
Part #
Category
Texas Instruments UC284xL/UC284xL-Q1 PowerDescription
Texas Instruments UC284xL/UC284xL-Q1 PWM Controllers are pin-for-pin compatible control devices, an upgraded version of the UC284xAQ/UC284xA-Q1. They feature a higher VCC range at 36V, lower start-up current at 0.25mA, and faster response on cycle-by-cycle current protection at 100ns.
Manufacturer
Part #
Category
Texas Instruments TPS65223-Q1 PowerDescription
The Texas Instruments TPS65223-Q1 Power Management IC is designed for power management in safety-relevant automotive applications. It features four step-down DC/DC converters and three low-drop-out regulators, suitable for a wide temperature range of -40°C to +125°C. This PMIC is AEC-Q100 qualified and supports various processors in automotive and industrial applications.
Manufacturer
Part #
Category
Texas Instruments TPS543x21 PowerDescription
The Texas Instruments TPS543x21 Synchronous Buck Converters include the TPS543321, TPS543421, and TPS543521 with 3A, 4A, and 5A continuous output current. These high-efficiency converters are designed for systems powered from 5V to 12V powerbus rails, featuring a wide input voltage range of 3.8V to 18V. They offer integrated protection functions and are suitable for a variety of applications including medical devices and portable electronics.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVM3901-QW-00A PowerDescription
The EVM3901-QW-00A Evaluation Board is designed to demonstrate the capabilities of the MPM3901-AEC1 fully integrated, fixed-frequency, synchronous step-down power module. It supports a wide input voltage range from 4.5V to 60V and delivers up to 1A of continuous output current, making it suitable for various automotive applications. The board features built-in power MOSFETs and an integrated inductor for a compact and efficient design.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) MP8886 PowerDescription
The MP8886 Synchronous Buck Converters are 45V input and dual-output synchronous step-down converters with a PMBus control interface and Multiple-Time Programmable (MTP) memory. They can achieve up to 3A of continuous output current for two channels or up to 6A for a single channel, with output voltage configurable between 0.6V and 24V. These converters include various protection features and are suitable for applications such as DC/DC power systems and USB Power Delivery.
Manufacturer
Part #
Category
TAIYO YUDEN LBXN Series PowerDescription
TAIYO YUDEN LBXN Series SMD Power Inductors are wire-wound ferrite power inductors designed for telecommunications infrastructure and industrial equipment. They feature a durable structure that withstands dropping impact and operate within an inductance range of 0.47µH to 220µH. Ideal for applications such as base stations and DC/DC converters, these inductors ensure reliable performance in demanding environments.
Manufacturer
Part #
Category
ReFLEX CES AGF012 / 027 PowerDescription
The ReFLEX CES Ares Agilex™ 7 SoC F-Series System-on-Module (SoM) is based on the Intel® Agilex 7 SoC F-Series FPGA, offering flexibility and high-performance capabilities for complex algorithms. It is optimized for embedded applications, facilitating design processes and reducing time-to-market. Ideal for bioscience, quantum computing, radar systems, and satellite communication.
