Latest Components
Manufacturer
Part #
Category
Bourns HRP3822x & HRP5022x PowerDescription
Bourns HRP3822x and HRP5022x Power Inductors are through-hole inductors with shielded construction designed for low radiation. These inductors offer an inductance range of 0.68μH to 3.3μH and can handle high heating currents up to 235A. They are suitable for applications such as industrial high-current filters, high-current battery charging, and DC-DC converters.
Manufacturer
Part #
Category
IXYS Integrated Circuits IXD0579M PowerDescription
The IXYS IXD0579M Gate Driver is a high-frequency driver capable of driving two N-channel MOSFETs in a half-bridge configuration. It features an integrated bootstrap diode that allows for floating high-side operation up to 100V, simplifying circuit design and reducing PCB space. This driver is ideal for applications such as Brushless DC motor drivers and DC/DC converters.
Manufacturer
Part #
Category
Microchip Technology MIC24097 PowerDescription
The Microchip Technology MIC24097 Evaluation Board is fully assembled and tested to demonstrate the MIC24097 functionalities. It implements an exceptional adaptive on-time control architecture and is based on a buck topology, providing 1V output voltage with a maximum current of 20A. The board is optimized for input voltages ranging from 5V to 20V.
Manufacturer
Part #
Category
Texas Instruments TPS628523HAQEVM-070 PowerDescription
The Texas Instruments TPS628523HAQEVM-070 Converter Evaluation Module (EVM) is designed to help users quickly test and evaluate the operation and functionality of the TPS628521-Q1, TPS628522-Q1, and TPS628523-Q1 buck converters. It converts a 2.7V to 6V input voltage to a regulated 1.8V output voltage that delivers up to 3A maximum. The module features the TPS628523HAWDLSRQ1 IC, which operates in a forced PWM mode across the entire load current range.
Manufacturer
Part #
Category
Texas Instruments bq2969TEVM PowerDescription
The Texas Instruments bq2969TEVM Evaluation Module is a complete evaluation system for the bq2969T, designed for overvoltage and over-temperature protection in Li-Ion and LiFePO4 battery packs. It includes a populated circuit module and necessary components to signal overcharge, over-discharge, and over-temperature conditions. This module can connect directly across battery cells or with a power supply using cell simulator resistors.
Manufacturer
Part #
Category
Texas Instruments bq25186EVM PowerDescription
The Texas Instruments bq25186EVM Evaluation Module (EVM) is designed for the bq25186 battery charge management IC, featuring a 1A linear battery charger with I2C control. It integrates essential functions for both industrial and personal electronics applications, ensuring optimized thermal performance and programmability. This evaluation kit is ideal for applications such as TWS headsets, smart glasses, and smartwatches.
Manufacturer
Part #
Category
Texas Instruments AMC-AMP-50A-EVM PowerDescription
The Texas Instruments AMC-AMP-50A-EVM Amplifier Evaluation Module is designed for ±50A shunt-based current sensing. It allows users to measure isolated output through the AMC3302 precision amplifier while sensing peak currents. This module features heat dissipation design and is suitable for various applications including motor drives and energy storage systems.
Manufacturer
Part #
Category
Texas Instruments PFC23338EVM-107 PowerDescription
Texas Instruments PFC23338EVM-107 Evaluation Motherboard is a Gallium nitride (GaN) based, 3.6kW, single-phase power factor correction (PFC) converter designed for M-CRPS server power supplies. It features integrated e-meter functionality with high accuracy and supports a maximum input current of 16ARMS. The design includes a baby boost converter to minimize bulk capacitor size.
Manufacturer
Part #
Category
M5Stack M141 PowerDescription
The M5Stack M141 ESP32-H2 Thread/Zigbee Gateway Module features an integrated low-power, 32-bit single-core MCU based on RISC-V and supports wireless communication protocols. It integrates IEEE 802.15.4 functionality for building Matter over Thread endpoint devices, ensuring interconnectivity across multiple ecosystems. This module is ideal for applications in smart homes, industrial automation, healthcare, and more.
Manufacturer
Part #
Category
Texas Instruments LMX1205EVM PowerDescription
The Texas Instruments LMX1205EVM Evaluation Module is designed to evaluate the performance of the LMX1205, a four-output RF buffer, divider, and multiplier. It supports RF clocking inputs up to 12.8GHz and features adjustable output delays with picosecond precision. This module is ideal for applications in test and measurement, wireless equipment testing, and aerospace.
