Latest Components
Manufacturer
Part #
Category
Ka-Ro Electronics QSBASE5 PowerDescription
Ka-Ro Electronics QSBASE5 Evaluation Kit is used to demonstrate the performance of QSMP2 modules. This kit features dual 10/100 Ethernet, USB 2.0, LVDS display connector, MIPI camera connector, PCIe connector, and a USB Type-C® power supply. The QSBASE5 kit features two 80-pin connectors and an optional shielding cabinet for the socketed QS module.
Manufacturer
Part #
Category
Ka-Ro Electronics QSMP2 PowerDescription
The Ka-Ro Electronics QSMP2 Solder-Down Computer On Modules feature a dual Arm Cortex-A35 processor and support up to 60x 3.3V general purpose I/O. With 4GB eMMC ROM and 1GB LPDDR4 RAM, these industrial-grade modules are designed for basic computing node applications. They are pin-compatible with the QS family and support Linux OS.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EV2615D-Q-00A PowerDescription
The Monolithic Power Systems (MPS) EV2615D-Q-00A Lithium-Ion Battery Charger Evaluation Board is designed to demonstrate the capabilities of the MP2615D, a monolithic switching charger with integrated power MOSFETs for single-cell lithium-ion or lithium-polymer batteries. It achieves up to 2A of charge current and features internal reverse-blocking protection. The board size is 6.3cm x 6.3cm x 0.16cm.
Manufacturer
Part #
Category
Texas Instruments UCC33020-Q1 PowerDescription
The Texas Instruments UCC33020-Q1 Ultra-Small DC/DC Power Module is an automotive-qualified module designed to provide 1W of isolated output power with a 3V to 5.5V input voltage range. It features a 3kV RMS isolation rating and is available in a compact VSON package. This power module is ideal for applications such as Battery-Management Systems and isolated bias for sensors.
Manufacturer
Part #
Category
Cincon LFM550M PowerDescription
Cincon LFM550M Medical AC-DC Power Supplies with Power Factor Correction (PFC) are 550W highly efficient single-output AC/DC power modules that meet various medical standards. These compact modules are fully protected against short-circuit and over-voltage conditions. Ideal for medical lighting systems, CT scanning, and medical computers.
Manufacturer
Part #
Category
Cincon LFM550S PowerDescription
Cincon LFM550S AC-DC Power Supplies with Power Factor Correction (PFC) are 550W highly efficient single-output AC/DC power modules. These compact modules are fully protected against short-circuit and over-voltage conditions, making them extremely reliable. Ideal for automation equipment and network/telecom devices, these power supplies meet various international safety standards.
Manufacturer
Part #
Category
WIZnet W55RP20-S2E PowerDescription
The WIZnet W55RP20-S2E Pre-Programmed Microcontroller (MCU) is designed to offer 10/100Mbps Ethernet and up to 921,600bps serial speed. It supports multiple protocols such as SSL TCP client, MQTT client, and MQTTS client, and is configurable through serial AT commands. This MCU is ideal for applications in solar power monitoring systems and industrial requirements.
Manufacturer
Part #
Category
Arduino 131482679 PowerDescription
The Arduino Portenta Proto Kit VE provides everything needed to turn ideas into functional prototypes quickly and efficiently. It includes advanced tools for environmental sensing, machine vision, and vibration detection, significantly accelerating the prototyping phase. This comprehensive kit features the Portenta H7 microcontroller and various Modulino nodes for rapid development.
Manufacturer
Part #
Category
Texas Instruments TPSM82916EVM PowerDescription
The Texas Instruments TPSM82916EVM Evaluation Module facilitates the evaluation of the TPSM82916 and TPSM82914. It outputs a 1.2V voltage from input voltages between 3V and 17V, making it a high-efficiency alternative to low-dropout linear regulators in noise-sensitive circuits. With low output noise and ripple, it is ideal for various applications including telecom and medical.
Manufacturer
Part #
Category
IXYS MCMA140PD1800TB PowerDescription
The IXYS MCMA140PD1800TB Thyristor-Diode Module features a planar passivated chip for long-term stability and is built with a Direct Copper Bonded (DCB) Al2O3 ceramic base plate. It offers 1800V maximum repetitive reverse/forward blocking voltage, 140A average forward current, and 520W total power dissipation, making it suitable for various applications including AC motor control and power conversion. This module is designed for high thermal conductivity and electrical insulation.
