Latest Components
Manufacturer
Part #
Category
Bourns SA2-HS PowerDescription
Bourns SA2-HS High-Voltage Gas Discharge Tubes (GDT) are designed for power applications that require fast and reliable surge protection. These tubes deliver a DC breakdown voltage of 3.1kV and an impulse sparkover of 3.7kV at 1kV/µs. Ideal for high voltage power, industrial, and energy conversion systems, they provide improved protection for downstream circuitry.
Manufacturer
Part #
Category
TDK FS3303 PowerDescription
The TDK FS3303 µPOL™ Buck Regulator is a fully integrated and highly efficient micro-Point-of-Load voltage regulator. It features an on-chip PWM controller and integrated MOSFETs, making it an ultra-compact 3A synchronous buck regulator suitable for various applications. With a wide input voltage range and built-in protection features, it is ideal for optical networking systems, FPGAs, and portable devices.
Manufacturer
Part #
Category
CUI Inc P78B-1000R PowerDescription
CUI Inc P78B-1000R 1A Non-Isolated DC-DC Converters deliver high-efficiency DC-DC conversion (up to 94.5%) in a compact SIP3 package. It features a wide 4.75V to 36V input voltage range and continuous short-circuit protection. Ideal for computers, industrial controls, and electric vehicle charging stations.
Manufacturer
Part #
Category
Texas Instruments AMC0100R PowerDescription
The Texas Instruments AMC0100R is a precision, galvanically isolated amplifier designed for a ±250mV differential input with a single-ended, ratiometric output. It is optimized for direct connection to low-impedance signal sources and features an isolation barrier that supports high working voltages. This amplifier is suitable for applications in motor drives and power supplies.
Manufacturer
Part #
Category
STMicroelectronics STDRIVEG612 PowerDescription
The STMicroelectronics STDRIVEG612 600V High-Speed Half-Bridge Gate Driver is optimized for 5V driving enhanced-mode GaN HEMTs. It supports a voltage rail of up to 600V and features high-current capability with short propagation delays. This driver is ideal for applications such as AC-DC converters, battery chargers, and motor drivers.
Manufacturer
Part #
Category
NXP Semiconductors FRDM-MCXW72 PowerDescription
The NXP Semiconductors FRDM-MCXW72 MCU Development Board is a compact and scalable development board designed for rapid prototyping of the MCX W72 wireless MCU. It supports multiprotocol wireless communication including Bluetooth LE, Zigbee, Thread, and Matter. The board features an onboard MCU-Link debugger, various sensors, and external SPI Flash memory for enhanced functionality.
Manufacturer
Part #
Category
Texas Instruments DRV8844A PowerDescription
The Texas Instruments DRV8844A Quad Half-Bridge Driver is a versatile four-channel device designed for driving various loads such as DC motors and solenoids. It supports up to 2.5A peak output current and features independent control for each half-bridge. With built-in protection features, it ensures reliable operation in demanding applications.
Manufacturer
Part #
Category
Diodes Incorporated AP53781 PowerDescription
The Diodes Inc. AP53781 USB Power Delivery (PD) Dual-Role Power (DRP) Controller is a fully integrated USB Type-C PD3.2 DRP controller designed to support Extended Power Range (EPR) up to 28V and Standard Power Range (SPR) up to 21V. It functions as both a power consumer and provider, with low power consumption in power-down mode. The device includes built-in safety protections and supports various power profiles for flexible applications.
Manufacturer
Part #
Category
Panasonic AFP0HC32ET PowerDescription
Panasonic Industrial Automation AFP0HC32ET Programmable Logic Controllers (PLCs) provide 32 controllable I/O points and built-in flash ROM program memory. These PLCs feature built-in dual Ethernet ports and operate within a voltage range of 20.4VDC to 28.8VDC. Typical applications include inspection equipment, coaters, and laser scanners.
Manufacturer
Part #
Category
Texas Instruments TPS650340-Q1 PowerDescription
The Texas Instruments TPS650340-Q1 Automotive Camera Power Management IC (PMIC) is designed for automotive camera modules, integrating one LDO regulator and three step-down converters. It supports a wide input voltage range and provides flexible design options. This device is AEC-Q100 grade 1 qualified, ensuring reliability in automotive applications.
