Latest Components
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-AD7091R-8ARDZ PowerDescription
The Analog Devices EVAL-AD7091R-8ARDZ Evaluation Board is designed for easy evaluation of the AD7091R-8 family of analog-to-digital converters (ADCs). It features onboard components such as high-speed operational amplifiers and a low-dropout linear regulator, making it suitable for various applications. This board can be controlled via a USB connection to a PC, allowing for comprehensive data analysis.
Manufacturer
Part #
Category
Analog Devices Inc. ADPA1112 PowerDescription
Analog Devices ADPA1112 Gallium Nitride (GaN) Power Amplifiers are 15W, 1GHz to 22GHz wideband power amplifiers. They feature a saturated output power of 42dBm and a power gain of 14dB typical from 8GHz to 16GHz. These devices operate within a -40°C to +85°C range, making them suitable for various applications including electronic warfare and test equipment.
Manufacturer
Part #
Category
onsemi AFGBG70T65SQDC PowerDescription
The onsemi AFGBG70T65SQDC N-Channel Field Stop IV High Speed IGBT utilizes advanced field stop technology for high efficiency. It features a 650V collector-to-emitter rating and a low saturation voltage of 1.54V. This component is ideal for automotive applications such as onboard chargers and DC-DC converters.
Manufacturer
Part #
Category
onsemi AFGH4L60T120RWx-STD PowerDescription
The onsemi AFGH4L60T120RWx-STD N-Channel Field Stop VII IGBTs utilize advanced 7th generation IGBT technology and a Gen7 diode in a compact 4-lead package. With a collector-to-emitter voltage rating of 1200V and a collector current of 60A, this IGBT is designed for high efficiency in automotive applications. It features low on-state voltage and reduced switching losses, making it suitable for both hard and soft switching topologies.
Manufacturer
Part #
Category
Advantech EKI-2711MPSI & EKI-2711PSI PowerDescription
Advantech EKI-2711MPSI and EKI-2711PSI PoE Splitters function as powered devices (PD), receiving power via Power over Ethernet (PoE) and separating the incoming PoE signal into distinct power and data outputs. These devices easily connect legacy devices, such as IP cameras or Wi-Fi access points, to a PoE network architecture. The EKI-2711MPSI allows the output voltage to be switched between 12V DC and 24V DC via a DIP switch.
Manufacturer
Part #
Category
Analog Devices / Maxim Integrated MAX25560 PowerDescription
The MAX25560 LED Drivers are 6-channel LED backlight drivers featuring an integrated current-mode boost controller. They operate at a switching frequency range of 400kHz to 2.2MHz and are designed for low battery voltage operation. Ideal for automotive applications, these drivers come in a compact TQFN package and function over a temperature range of -40°C to 125°C.
Manufacturer
Part #
Category
Analog Devices Inc. AD-JUPITER-EBZ PowerDescription
The Analog Devices AD-JUPITER-EBZ Software-Defined Radio Platform is based on the ADRV9002 RF transceiver and Xilinx Zynq UltraScale+ MPSoC, covering a frequency range of 30MHz to 6GHz. It features high-quality RF linearity performance and advanced capabilities such as fast profile switching and multi-chip synchronization. This platform is designed for applications in aerospace, defense, and communications.
Manufacturer
Part #
Category
Analog Devices Inc. ADRD8012-01Z PowerDescription
The Analog Devices ADRD8012-01Z Programmable Logic IC Board is an edge compute platform designed for low-latency data transfer from multiple GMSL interfaces to a 10Gb Ethernet link. It supports advanced processing capabilities and is ideal for applications in autonomous robots and vehicles. The board features a web-based user interface for easy configuration and control.
Manufacturer
Part #
Category
Texas Instruments UCC21351x-Q1 PowerDescription
Texas Instruments UCC21351x-Q1 Gate Drivers are isolated dual-channel drivers designed for high efficiency and robustness in power applications. With a peak-source current of 4A and peak-sink current of 6A, they can drive power MOSFETs, SiC, and IGBT transistors. These drivers are AEC-Q100 qualified, making them suitable for automotive applications.
Manufacturer
Part #
Category
Texas Instruments UCC27212A-Q1 PowerDescription
The Texas Instruments UCC27212A-Q1 Gate Driver is an automotive half-bridge driver designed for high efficiency and robust performance in various applications. It features a 5V turn-off Under Voltage Lockout (UVLO) and operates with TTL-compatible inputs within a voltage range of 7V to 17V. This device is AEC-Q100 qualified, making it ideal for automotive DC/DC converters and electric power steering systems.
