Latest Components
Manufacturer
Part #
Category
Texas Instruments bq41Z50 PowerDescription
The Texas Instruments bq41Z50 Battery Pack Manager is a fully integrated, single-chip solution designed for managing 2-series, 3-series, and 4-series cell LiPO, Li-ion, and LiFePO4 battery packs. It features Dynamic Z-Track technology for accurate state of charge reporting and includes multiple safety functions to protect against overvoltage, overcurrent, and overtemperature conditions. This device is ideal for applications in portable electronics, drones, and medical equipment.
Manufacturer
Part #
Category
Bourns SDE0403AT PowerDescription
Bourns SDE0403AT Automotive-Grade SMD Power Inductors are AEC-Q200-compliant power inductors designed to meet the high-current-density and high-temperature requirements of various electronic applications. These low-profile inductors feature a drum ferrite structure and a maximum thickness of 3.5mm. The SDE0403AT offers a high saturation current of up to 4.8A and operates over a -55°C to +150°C temperature range.
Manufacturer
Part #
Category
Texas Instruments TLV7A03 PowerDescription
The TLV7A03 is an ultra-small, ultra-low quiescent current LDO linear regulator that sources 200mA with excellent transient performance. With an ultra-low IQ of 250nA, it is designed for applications where low quiescent current is critical, helping to extend battery life. It supports output voltages from 0.8V to 5.0V, making it suitable for modern microcontrollers.
Manufacturer
Part #
Category
Texas Instruments TLV775 PowerDescription
The Texas Instruments TLV775 High-PSRR Low-Dropout (LDO) Linear Regulator sources 500mA of output current and is designed to provide a voltage source with high PSRR. It features an internal soft-start circuit to minimize input voltage drop during start-up and is stable with small ceramic capacitors. This LDO is suitable for various applications including smartphones and tablets.
Manufacturer
Part #
Category
Asahi Kasei Microdevices AKD5818AiM-EZ-V PowerDescription
The AKD5818AiM-EZ-V Rapid Prototyping Kit is designed to evaluate the performance of the AK5818AIM millimeter-wave radar signal processing IC. It integrates an ESP32-P4 SoC with a dual-core RISC-V processor and offers various connectivity options including USB Type-C and RJ45. This kit also features RGB LEDs for visual feedback and JST SH connectors for embedded use.
Manufacturer
Part #
Category
Carlo Gavazzi NRG-3PH-SSRs PowerDescription
Carlo Gavazzi NRG 3-Phase Smart Solid State Relays (SSRs) are designed for high-performance switching solutions with advanced digital communication capabilities. They provide precise power control for 2-pole and 3-pole applications and include a wide array of diagnostic features. These relays are engineered for seamless integration into Industry 4.0 architectures, enhancing process reliability and equipment effectiveness.
Manufacturer
Part #
Category
Texas Instruments UCC23525 PowerDescription
The Texas Instruments UCC23525 Single-Channel Isolated Gate Driver is designed for IGBTs, MOSFETs, and SiC MOSFETs, featuring a 5A source and sink peak output current with a 5kV RMS reinforced isolation rating. It supports a high supply voltage range of 30V, making it suitable for driving both low-side and high-side power FETs. This driver offers significant performance and reliability improvements over traditional opto-coupler-based gate drivers.
Manufacturer
Part #
Category
M5Stack Atomic Motion Base v1.2 PowerDescription
M5Stack Atomic Motion Base v1.2 is a high-performance servo and DC motor drive base designed for the Atom main control series. It features multiple interfaces for servo and DC motor control, along with integrated safety protection functions. This device is ideal for applications such as DC motor car control and servo robotic arm control.
Manufacturer
Part #
Category
Texas Instruments TLV785 PowerDescription
The Texas Instruments TLV785 High-PSRR Low-Dropout (LDO) Linear Regulator sources 500mA of output current and is designed to provide a voltage source with high PSRR. It features an internal soft-start circuit to minimize inrush current and is stable with small ceramic capacitors. This LDO comes in a compact SOT-23 package, suitable for various applications.
Manufacturer
Part #
Category
XP Power BCT40T PowerDescription
XP Power BCT40T PCB-Mount DC-DC Converters deliver an output power of 40W in a compact metal package with 25.4mm x 25.4mm (1" x 1") dimensions. The highly efficient BCT40T series features regulated single outputs from 3.3VDC to 24VDC and dual outputs at ±12V and ±15VDC. Ideal for information technology equipment, robotics, communications, and industrial applications.
