Latest Components
Manufacturer
Part #
Category
Abracon ASWD-S2 SemiconductorsDescription
Abracon ASWD-S2 RF Switches are wideband and high-linearity RF switches designed for exceptional performance across diverse frequency bands. These Single-Pole, Double-Throw (SPDT) reflective switches deliver low insertion loss, high isolation, and superior signal integrity. Ideal for general-purpose RF applications, they support a wide voltage range and temperature range.
Manufacturer
Part #
Category
ISSI IS25LP512MJ & IS25WP512MJ SemiconductorsDescription
The ISSI IS25LP512MJ and IS25WP512MJ Flash Memory Devices are versatile storage solutions designed for systems that require limited space, low pin count, and low power consumption. They feature a 4-wire SPI interface and support Double Transfer Rate (DTR) commands for efficient data transfer. With more than 20 years of data retention, these devices are ideal for various applications.
Manufacturer
Part #
Category
ROHM Semiconductor LM2904 & LM2902 SemiconductorsDescription
ROHM Semiconductor LM2904 and LM2902 Ground Sense Operational Amplifiers (Op-Amps) are operable from almost GND level for both input and output. These Op-Amps are designed to operate on a single or dual power supply and feature a maximum junction temperature of 150°C. Typical applications include automotive electronics, consumer electronics, and active filters.
Manufacturer
Part #
Category
ROHM Semiconductor BD74C32FV-C SemiconductorsDescription
The ROHM Semiconductor BD74C32FV-C is designed for 1.65V to 5.5V power supply voltage operation. It features a low current consumption of 10µA and a maximum propagation delay of 12ns at 3V. This OR gate is ideal for automotive applications and comes in a compact SSOP-B14 package.
Manufacturer
Part #
Category
Texas Instruments ISO654x/ISO654x-Q1 SemiconductorsDescription
Texas Instruments ISO654x/ISO654x-Q1 Quad-Channel Functional Isolators are designed for cost-sensitive, space-constrained applications requiring isolation for non-safety applications. They support high EMC performance while isolating CMOS or LVCMOS digital I/Os, with an isolation barrier capable of handling transient overvoltages. These devices feature enable pins for high impedance outputs.
Manufacturer
Part #
Category
Texas Instruments SN74AC00/SN74AC00-Q1 SemiconductorsDescription
Texas Instruments SN74AC00/SN74AC00-Q1 Quad 2-Input Positive-NAND Gates contain four independent 2-input NAND gates. These devices operate within a 2V to 6V VCC range and accept input voltages up to 6V. They are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC153-Q1 SemiconductorsDescription
Texas Instruments SN74AC153-Q1 Dual 4-to-1 Line Data Selectors/Multiplexers are designed to select one of four data sources with full binary decoding. Each channel includes a strobe input that forces the output low when activated. This component is AEC-Q100 qualified, making it suitable for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC257-Q1 SemiconductorsDescription
The Texas Instruments SN74AC257-Q1 Quad 2-Input Non-Inverting Multiplexers contain four 2-to-1 digital multiplexers with shared select (A/B) and output enable (OE) inputs. They operate within a wide voltage range of 1.5V to 6V and can handle input voltages up to 6V. This device is AEC-Q100 qualified for automotive applications and supports a continuous output drive of 24mA at 5V.
Manufacturer
Part #
Category
Texas Instruments SN74AC86/SN74AC86-Q1 SemiconductorsDescription
Texas Instruments SN74AC86/SN74AC86-Q1 Quad 2-Input Exclusive-OR Gates are quadruple 2-input exclusive-OR gates. They perform the Boolean function Y = A ⊕ B or Y = AB + AB. These devices are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74ACT257-Q1 SemiconductorsDescription
The Texas Instruments SN74ACT257-Q1 Quad 2-to-1 Line Data Selectors/Multiplexers contain four 2-to-1 digital multiplexers with shared select and output enable inputs. These devices are available in a wettable flank QFN package and have an operating range of 4.5V to 5.5V. They support a continuous ±24mA output drive at 5V and can handle up to ±75mA output drive in short bursts.
