Latest Components
Manufacturer
Part #
Category
Texas Instruments TSDx-Q1 SemiconductorsDescription
Texas Instruments TSDx-Q1 Unidirectional TVS Diodes are designed to clamp harmful transients such as ESD and surge. These diodes provide ESD protection up to ±30kV and feature <20pF IO capacitance with 50nA maximum ultra-low leakage current. They are AEC-Q100 qualified for automotive applications and suitable for I/O and power line protection.
Manufacturer
Part #
Category
ECS ECS-TXO-16CSMV4 SemiconductorsDescription
ECS ECS-TXO-16CSMV4 Clipped Sine Wave Temperature Compensated Crystal Oscillators (TCXOs) provide exceptional frequency stability and precision in compact electronic systems. They support a wide input voltage range from 1.7V to 3.6V and feature a clipped sine wave output with a peak-to-peak voltage of 0.8V. With a frequency range of 26MHz to 52MHz and low phase noise, these oscillators are ideal for precision timing circuits.
Manufacturer
Part #
Category
Texas Instruments SN74AC126/SN74AC126-Q1 SemiconductorsDescription
Texas Instruments SN74AC126/SN74AC126-Q1 Quad Non-Inverting Buffers contain four independent buffers with 3-state outputs and Schmitt-trigger inputs. Each gate performs the Boolean function Y = A in positive logic. These devices are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC125/SN74AC125-Q1 SemiconductorsDescription
Texas Instruments SN74AC125/SN74AC125-Q1 Quad 2-Input AND Gates contain four independent buffers with 3-state outputs. Each gate performs the Boolean function Y = A in positive logic and has an independent active-low output enable. These devices are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC09/SN74AC09-Q1 SemiconductorsDescription
Texas Instruments SN74AC09/SN74AC09-Q1 Quad 2-Input AND Gates contain four independent 2-input AND gates with open-drain outputs. Each gate performs the Boolean function Y = A × B in positive logic. These devices are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SNx5176B SemiconductorsDescription
Texas Instruments SNx5176B Differential Bus Transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They meet ANSI standards TIA/EIA-485-A and TIA/EIA-422-B, making them suitable for noisy environments. The devices feature thermal shutdown protection and operate from a single 5V power supply.
Manufacturer
Part #
Category
NXP Semiconductors i.MX RT1180 SemiconductorsDescription
The NXP i.MX RT1180 Crossover Microcontrollers feature a high-performance Arm Cortex-M7 core operating at speeds up to 800MHz and a power-efficient Cortex-M33 core up to 300MHz. Designed for industrial automation and IoT applications, they support various real-time protocols and include advanced security features. With integrated power management and a large on-chip RAM, these MCUs simplify complex system designs.
Manufacturer
Part #
Category
Nexperia NCA6416 SemiconductorsDescription
Nexperia NCA6416 Low-Voltage 16-Bit I/O Expanders are designed for microcontrollers needing additional I/O pins. They utilize an I²C-bus interface, making them suitable for compact applications like battery-powered devices with sensors and LED control. The device features multiple registers for configuration, input, output, and polarity inversion.
Manufacturer
Part #
Category
Diodes Incorporated PI2SSD3212A1 SemiconductorsDescription
The Diodes Inc. PI2SSD3212A1 is a 1.8V 14-Bit 2:1 eMMC/DDR Signal Switch designed for high-speed applications, supporting eMMC HS200 and HS400 bus speeds up to 400MB/s. It features a 1:2 demux or 2:1 mux topology, allowing all 14-bit channels to be switched to one of two ports. This device is ideal for DDR2, DDR3, or DDR4 memory bus switches with speeds up to 5Gbps.
Manufacturer
Part #
Category
Semtech RClamp04022S SemiconductorsDescription
The Semtech RClamp04022S RailClamp® 2-Line TVS Diode is designed to protect sensitive electronics from damage due to electrostatic discharge (ESD) and electrical overstress (EOS). It features a low operating voltage and fast response time, making it ideal for board-level protection. This device can protect two high-speed data lines operating at 4V.
