Latest Components
Manufacturer
Part #
Category
Abracon AK8 SemiconductorsDescription
Abracon AK8 ClearClock™ oscillators are compact SMD high-frequency oscillators measuring 1.0 mm × 0.8 mm × 0.24 mm. They provide ±100 ppm frequency stability from -40°C to +85°C, operate from a 3.3 V supply, and offer LVPECL or LVDS output logic.
Manufacturer
Part #
Category
Microchip Technology EV24D63A SemiconductorsDescription
The Microchip Technology AVR32LA32 Curiosity Nano Evaluation Kit is a hardware platform for evaluating the AVR32LA32 microcontroller and AVR LA family. It includes an onboard Curiosity Nano programmer/debugger, adjustable target voltage, and support for MPLAB development tools and partner toolchains.
Manufacturer
Part #
Category
Renesas Electronics PTX205RIOTEB SemiconductorsDescription
The PTX205RIOTEB evaluation board enables rapid evaluation of PTX205R NFC IC performance using the Config Tool GUI. It supports antenna matching and diagnostics, reader/writer performance, and host card emulation for IoT applications.
Manufacturer
Part #
Category
Lantronix NTC-201-01-01 SemiconductorsDescription
The Lantronix NTC-201 is a globally certified 4G LTE Cat 1bis industrial IoT router for secure managed connectivity in critical industrial applications. It features a Linux-based operating system, SDK support, cloud management, enterprise security, Ethernet connectivity, and rugged IP40 housing for DIN-rail or wall mounting.
Manufacturer
Part #
Category
Lantronix FOX5 (F54R000S/F54R00FS) SemiconductorsDescription
Secure 4G LTE Cat 1 bis intelligent gateways for edge-to-cloud connectivity, critical asset monitoring, industrial equipment, and vehicle telematics. Features include GNSS with dead reckoning, BLE 5.4, Modbus/BACnet/CAN bus support, programmable I/O, edge processing, and secure remote device management.
Manufacturer
Part #
Category
Abracon O-C14AL SemiconductorsDescription
Low phase noise oven-controlled crystal oscillators featuring an SC-cut crystal, ±5 ppb frequency stability from -40°C to +85°C, and 65 mA steady-state current. These compact devices provide sine-wave or CMOS/TTL outputs, voltage control, fast warm-up, and low power consumption.
Manufacturer
Part #
Category
Axiomtek CEM570 SemiconductorsDescription
Axiomtek CEM570 COM Express Type 6 Modules are compact computer-on-modules based on Intel Core Ultra processors for embedded and edge computing applications. They support dual-channel DDR5 memory, PCIe, SATA, USB, NVMe storage, and TPM 2.0 in a standardized COM Express Type 6 form factor.
Manufacturer
Part #
Category
Analog Devices Inc. MAX22915 SemiconductorsDescription
The MAX22915 is an industrial output device with eight high-side switches, each supporting up to 1A of continuous current. It integrates a 7-bit ADC, extensive per-channel diagnostics, SPI communication, LED driver support, protection features, and internal clamps for inductive loads. The device is housed in a compact 50-pin 6mm × 7mm flip-chip QFN package and operates from -40°C to +125°C.
Manufacturer
Part #
Category
Nexperia 400V/650V DPAK Recovery Rectifiers SemiconductorsDescription
Hyperfast and ultrafast recovery rectifiers rated from 400V to 650V and 4A to 15A in a DPAK Real-2-Pin package. They provide fast, smooth reverse recovery, low leakage, and minimized switching losses for high-efficiency AC/DC, DC/DC, motor drive, PFC, and freewheeling applications.
Manufacturer
Part #
Category
onsemi EMD4DXV6 SemiconductorsDescription
The onsemi EMD4DXV6 is a digital bias resistor transistor (BRT) that integrates a transistor with a monolithic bias network consisting of a series base resistor and a base-emitter resistor. It is designed to simplify circuit design, reduce board space and component count, and is AEC-Q101 qualified and PPAP capable. The device features 50V collector-base and collector-emitter voltage ratings and a 100mA collector current rating.
