Latest Components
Manufacturer
Part #
Category
Diotec Semiconductor LDP02-26CAYD2-AQ SemiconductorsDescription
Diotec Semiconductor LDP02-26CAYD2-AQ SMD TVS Diode offers 6600 W peak power, fast response, and ISO-16750-2 load-dump test compliance. This diode is designed for over-voltage protection and load-dump protection in motor vehicle supply systems. It features a 22V stand-off voltage and a breakdown voltage range of 24.4V to 28V.
Manufacturer
Part #
Category
ROHM Semiconductor LMRx802-LB SemiconductorsDescription
The ROHM Semiconductor LMRx802-LB Operational Amplifier features low-noise, low-input offset voltage, and low input bias current. It is a high-precision single or dual-CMOS operational amplifier ideal for industrial applications. This op amp is suitable for battery-powered equipment and sensors.
Manufacturer
Part #
Category
IXYS Integrated Circuits CPC1601M SemiconductorsDescription
The IXYS CPC1601M 1-Form-A Solid State Latching Relay is a low operating current relay in a compact 3mm x 3mm 8-pin DFN package. It can operate using power from an open-circuit load or a system power supply, allowing for extended battery life. This relay features a power output pin that can supply up to 10mW to external circuits.
Manufacturer
Part #
Category
Texas Instruments SN74AHCT374-Q1 SemiconductorsDescription
Texas Instruments SN74AHCT374/SN74AHCT374-Q1 Octal D-Type Flip-Flops include 3-state outputs and eight D-type flip-flops. These flip-flops operate at a 4.5V to 5.5V supply voltage range, with low delay and support 130MHz at 5V. Ideal for parallel data synchronization and storage, this device is AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
onsemi NVD6824NL SemiconductorsDescription
onsemi NVD6824NL Single N-Channel MOSFETs offer low RDS(on) to minimize conduction losses and high current capability. These MOSFETs feature a 100V drain-to-source voltage and a continuous drain current of 41A, making them suitable for automotive applications. They are AEC-Q101 qualified, RoHS-compliant, and designed for solenoid drivers and boost switches.
Manufacturer
Part #
Category
Texas Instruments SN74LV8T273/SN74LV8T273-Q1 SemiconductorsDescription
Texas Instruments SN74LV8T273/SN74LV8T273-Q1 Octal D-Type Flip-Flops include eight positive-edge-triggered D-type flip-flops with a direct active low Clear (CLR) input. These devices operate at a wide range of 1.65V to 5.5V supply voltage and are AEC-Q100 qualified for automotive applications. Ideal for synchronizing digital signals to a clock, they support up to 150Mbps with 5V or 3.3V VCC.
Manufacturer
Part #
Category
Diodes Incorporated PI6CB332202/PI6CB332204 SemiconductorsDescription
Diodes Inc. PI6CB332202/PI6CB332204 2-Input Clock Mux is a low-power device for PCIe 5.0/6.0 applications. It supports two reference inputs to fanout two/four low-power differential HCSL outputs up to 400MHz, with on-chip terminations for 85Ω or 100Ω output impedance. The device features power management capabilities and supports automatic output clock locking upon loss of input clock.
Manufacturer
Part #
Category
Texas Instruments SN74AHC373 & SN74AHC373-Q1 SemiconductorsDescription
Texas Instruments SN74AHC373 and SN74AHC373-Q1 Octal D-Type Latches are high-speed CMOS logic devices designed for octal transparent D-type latches with 3-state outputs. They operate within a supply voltage range of 2V to 5.5V and support high performance in digital systems. These devices are AEC-Q100 qualified for automotive applications and are available in a wettable flank QFN package.
Manufacturer
Part #
Category
Texas Instruments SN74LV8T374-Q1 SemiconductorsDescription
The Texas Instruments SN74LV8T374-Q1 consists of eight D-type flip-flops with 3-state outputs and integrated-level translation. It operates over a wide supply voltage range of 1.65V to 5.5V and is AEC-Q100 qualified for automotive applications. Typical applications include parallel data synchronization, storage, and shift registers.
Manufacturer
Part #
Category
Abracon ALND-WB SemiconductorsDescription
Abracon ALND-WB Low Noise Amplifiers (LNAs) are designed using advanced InGaAs pHEMT or GaAs E/D-pHEMT processes, featuring wideband operation from 0.8GHz to 10.5GHz. These amplifiers deliver high gain and low noise figures, ensuring enhanced signal clarity and system sensitivity. Ideal for various RF applications, they provide reliable solutions for advanced systems.
