Latest Components
Manufacturer
Part #
Category
onsemi NZ8P SemiconductorsDescription
onsemi NZ8P Zener Protection Diodes are designed to safeguard sensitive electronic components from electrostatic discharge (ESD) and transient voltage events. They feature a low clamping voltage and fast response time, making them ideal for high-speed data lines and low-voltage applications. The NZ8P provides reliable overvoltage protection without compromising signal integrity.
Manufacturer
Part #
Category
onsemi NL5X4002 SemiconductorsDescription
onsemi NL5X4002 Level Translators are 2-bit configurable, dual-supply, bidirectional, auto-sensing translators that do not require directional control pins. They are integrated with 10k pull-up resistors on the I/O line and designed to track two different power supply rails. These translators are ideal for low-voltage ASIC-level translation and applications such as mobile phones and cameras.
Manufacturer
Part #
Category
Central Semiconductor CDMS24720-170 / CDMS24740-170 SemiconductorsDescription
Central Semiconductor 1700V N-Channel Silicon Carbide (SiC) MOSFETs are designed for high-speed switching and fast reverse recovery applications. These MOSFETs feature a gate-source voltage (VGS) rating of 20V and a continuous drain current (ID) of 37A or 26A. They support higher breakdown voltage and better thermal conductivity.
Manufacturer
Part #
Category
onsemi NUD4700 SemiconductorsDescription
onsemi NUD4700 LED Shunts are designed for use with 1W LEDs, providing a current bypass in case of an open circuit. They automatically reset when the LED is replaced or healed, featuring a typical ON-state voltage of 1V and an OFF-state current of less than 250μA. These shunts are AEC-Q101 qualified, RoHS compliant, and ideal for applications requiring high reliability.
Manufacturer
Part #
Category
Texas Instruments SN74AHC374-Q1 SemiconductorsDescription
Texas Instruments SN74AHC374/SN74AHC374-Q1 Automotive Octal Edge-Triggered D-type flip-flops offer 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. These devices support a maximum frequency of 130MHz and operate within a 2V to 5.5V supply voltage range. The SN74AHC374-Q1 devices are AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AHCT373-Q1 SemiconductorsDescription
Texas Instruments SN74AHCT373/SN74AHCT373-Q1 D-Type Latches are octal transparent with 3-state outputs and eight D-type latches. These latches operate at a supply voltage range of 4.5V to 5.5V and are AEC-Q100 qualified for automotive applications. Typical applications include parallel data storage and digital bus buffering.
Manufacturer
Part #
Category
Texas Instruments SN74LV8T373-Q1 SemiconductorsDescription
The Texas Instruments SN74LV8T373/Q1 Translating Octal D-Type Flip-Flops feature eight D-type latches with shared Latch Enable and Output Enable inputs. They support a wide supply voltage range of 1.65V to 5.5V and are AEC-Q100 qualified for automotive applications. Typical applications include parallel data storage and digital bus buffering.
Manufacturer
Part #
Category
Microchip Technology PIC32-BZ6 SemiconductorsDescription
The Microchip Technology PIC32-BZ6 is a high-performance, low-power wireless microcontroller unit powered by a 128MHz Arm Cortex-M4F processor. It features robust security and extensive wireless connectivity options, including Bluetooth and IEEE 802.15.4 protocols. With 2MB of Flash and 512KB of RAM, it supports a wide range of applications from consumer electronics to industrial automation.
Manufacturer
Part #
Category
onsemi AFGB30T65RQDN SemiconductorsDescription
The onsemi AFGB30T65RQDN Insulated Gate Bipolar Transistor (IGBT) offers optimum performance for automotive applications. It features high current capability, fast switching, and high input impedance, making it suitable for E-compressor and PTC Heater applications in HEV/EV. This IGBT is AEC-Q101 qualified, Pb-free, and RoHS compliant.
Manufacturer
Part #
Category
Diotec Semiconductor BZT52C39-AQ SemiconductorsDescription
Diotec Semiconductor BZT52C39-AQ SMD Planar Zener Diode provides accurate voltage regulation with low leakage current and is AEC-Q101 qualified. This Zener diode supports a nominal Zener voltage range of 37V to 41V at 2.5mA for stable performance. Typical applications include voltage stabilization and regulators.
