Latest Components
Manufacturer
Part #
Category
Nexperia NCA6416 SemiconductorsDescription
Nexperia NCA6416 Low-Voltage 16-Bit I/O Expanders are designed for microcontrollers needing additional I/O pins. They utilize an I²C-bus interface, making them suitable for compact applications like battery-powered devices with sensors and LED control. The device features multiple registers for configuration, input, output, and polarity inversion.
Manufacturer
Part #
Category
Diodes Incorporated PI2SSD3212A1 SemiconductorsDescription
The Diodes Inc. PI2SSD3212A1 is a 1.8V 14-Bit 2:1 eMMC/DDR Signal Switch designed for high-speed applications, supporting eMMC HS200 and HS400 bus speeds up to 400MB/s. It features a 1:2 demux or 2:1 mux topology, allowing all 14-bit channels to be switched to one of two ports. This device is ideal for DDR2, DDR3, or DDR4 memory bus switches with speeds up to 5Gbps.
Manufacturer
Part #
Category
Semtech RClamp04022S SemiconductorsDescription
The Semtech RClamp04022S RailClamp® 2-Line TVS Diode is designed to protect sensitive electronics from damage due to electrostatic discharge (ESD) and electrical overstress (EOS). It features a low operating voltage and fast response time, making it ideal for board-level protection. This device can protect two high-speed data lines operating at 4V.
Manufacturer
Part #
Category
Nexperia NCA9547A SemiconductorsDescription
Nexperia NCA9547A 8-Channel I²C Bus Multiplexers are octal bidirectional translating devices managed by the I²C bus. The device allows for voltage level translation between different bus voltages, enabling communication between 1.8V, 2.5V, 3.3V, and 5V parts without additional protection. It features an active LOW reset input and supports hot insertion.
Manufacturer
Part #
Category
Nexperia NCA9548A SemiconductorsDescription
Nexperia NCA9548A 8-Channel I2C Bus Switches are octal bidirectional translating switches controlled through the I2C bus. They allow voltage level translation between different bus voltages, enabling communication between 1.8V, 2.5V, 3.3V, and 5V parts without additional protection. The device features an active LOW reset input and supports hot insertion.
Manufacturer
Part #
Category
onsemi T10 SemiconductorsDescription
onsemi T10 Low/Medium Voltage MOSFETs are single N-channel power MOSFETs in 40V and 80V categories with improved performance and high power density. They feature low RDS(on) to minimize conduction losses and low capacitance to minimize driver losses. Typical applications include Synchronous Rectification in DC-DC and AC-DC converters, battery protection, and motor drives.
Manufacturer
Part #
Category
Qorvo QPL1841 SemiconductorsDescription
The Qorvo QPL1841 is a Single-Ended Monolithic Microwave Integrated Circuit (MMIC) RF Amplifier IC designed for CATV applications. It features 12.5dB of gain and operates from 5MHz to 850MHz, making it suitable for Broadband CATV DOCSIS 4.0 applications. This compact 3mm x 3mm 16-pin QFN packaged device is powered by a single supply ranging from 5V to 8V.
Manufacturer
Part #
Category
Renesas Electronics RL78/L23 SemiconductorsDescription
Renesas Electronics RL78/L23 Low Power Microcontrollers offer dual-bank flash, segment LCD, and capacitive touch function. The dual-bank flash facilitates FOTA (Firmware update Over the Air) enablement, while a built-in segment LCD and capacitive touch function streamline system design, reduce BOM cost, and lower footprint size.
Manufacturer
Part #
Category
Texas Instruments SN74LVC1G34/SN74LVC1G34-Q1 SemiconductorsDescription
The Texas Instruments SN74LVC1G34/SN74LVC1G34-Q1 Single Buffer Gates are designed for operation with a VCC range of 1.65V to 5.5V and perform the Boolean function Y = A in positive logic. This CMOS device features high output drive and low static power dissipation, making it suitable for various applications. It is AEC-Q100 qualified for automotive applications and available in ultra-small packages.
Manufacturer
Part #
Category
ECS ECS-TXO-16CSMV4 SemiconductorsDescription
ECS ECS-TXO-16CSMV4 Clipped Sine Wave Temperature Compensated Crystal Oscillators (TCXOs) deliver exceptional frequency stability and precision in compact electronic systems. They support a wide input voltage range from 1.7V to 3.6V and feature a clipped sine wave output with a peak-to-peak voltage of 0.8V. With a frequency range of 26MHz to 52MHz and low phase noise, these oscillators are ideal for precision timing circuits.
