Latest Components
Manufacturer
Part #
Category
DFRobot SEN0686 SensorsDescription
The DFRobot SEN0686 is an advanced circular flexible potentiometer sensor using graphene-based pressure-sensitive materials in a 0.45mm ultra-thin structure. It converts physical pressure into a linear voltage signal from 0.2V to 0.8V with a rapid response time of less than 1 millisecond and a low trigger force of 20g. Designed for durability and precision, it offers over one million cycles lifespan, ideal for applications in robotics, smart home interfaces, and IoT devices.
Manufacturer
Part #
Category
DFRobot SEN0684 SensorsDescription
The DFRobot SEN0684 is an ultra-thin circular flex force sensor designed for high-precision pressure detection in rigorous environments. It supports direct soldering and withstands temperatures up to +120°C, offering a linear sensing range from 20g to 6kg with a response time under 1ms. This sensor is ideal for applications in robotics, automotive, industrial automation, and interactive interfaces.
Manufacturer
Part #
Category
DFRobot SEN0682 SensorsDescription
The DFRobot SEN0682 is a compact, solid-state LiDAR sensor designed for robotics applications. It features a 64x8 matrix array with 512 ranging points and a 120° x 20° field of view, providing detailed environmental perception up to five meters. This sensor supports continuous ranging with a data visualization GUI and uses Direct Time-of-Flight technology for accurate obstacle detection and mapping.
Manufacturer
Part #
Category
DFRobot SEN0678 SensorsDescription
The DFRobot SEN0678 Gravity STCC4 is a cost-effective, multi-functional air quality sensor module designed for rapid integration and scalable deployments. It features the Sensirion STCC4 gas sensing chip based on Thermal Conductivity measurement, providing stable and reliable CO2 concentration readings along with ambient temperature and humidity data. The sensor operates on a 3.3V to 5V range with an I2C interface, making it ideal for indoor air quality monitoring, smart home systems, and educational projects.
Manufacturer
Part #
Category
DFRobot SEN0667 SensorsDescription
The DFRobot SEN0667 Fermion Barometric Pressure Sensor uses Bosch Sensortec's BMP581 chip, offering high accuracy, temperature stability, and power efficiency. It supports I2C/I3C/SPI interfaces and is ideal for applications such as drone altitude hold, indoor navigation, and fitness tracking. The module operates at 3.3V logic and requires a level converter for 5V microcontrollers.
Manufacturer
Part #
Category
Quectel YEGN103W8A SensorsDescription
The Quectel YEGN103W8A is a GNSS magnetic active external antenna optimized for GNSS L1/L5 frequencies. It features magnetic and suction cup support, an SMA male-to-TNC male cable connector, and a 40dB ±4dB LNA gain. The antenna has an IP67 protection rating, a wide operating temperature range from -40°C to +85°C, and comes with a 3000mm RG174 cable.
Manufacturer
Part #
Category
Quectel YEGD006U1A SensorsDescription
The Quectel YEGD006U1A is a GNSS active external antenna designed for multiconstellation, triple-band positioning with centimeter-level accuracy. It features active amplification, industrial-grade durability, and an IP68 ingress protection rating. Suitable for harsh outdoor, automotive, and industrial applications, it supports GPS, Galileo, BDS, QZSS, and GLONASS frequency bands.
Manufacturer
Part #
Category
Vishay / Sfernice 34 PHE SensorsDescription
The Vishay / Sfernice 34 PHE series are bushing-mount Hall effect sensors designed for industrial applications, offering accurate linearity down to ±1%. These sensors feature non-contacting technology, support all electrical angles up to 3600°, and provide dual-output signal options. They are fully sealed with an IP65 rating, have a long life of 10 million cycles, and operate within a temperature range of -40°C to +85°C.
Manufacturer
Part #
Category
Littelfuse TMR Omnipolar Push Pull Switch Sensor SensorsDescription
The Littelfuse TMR Omnipolar Push Pull Switch Sensor is a magnetically triggered digital switch featuring high sensitivity, fast response, and low power consumption. It integrates a Tunneling Magnetoresistance (TMR) magnetic sensor with CMOS signal processing circuitry for precise magnetic sensing and noise immunity. Typical applications include proximity switches, speed sensing, utility meters, and wearable devices.
Manufacturer
Part #
Category
DFRobot 3.5" IPS Capacitive Touch Screen for ESP32 SensorsDescription
The DFRobot 3.5" IPS Capacitive Touch Screen features advanced optical bonding technology for superior clarity, reduced reflection, and dust resistance. It offers a 480x320 resolution with a 178° wide viewing angle and supports 5-point capacitive touch. Designed for seamless integration with ESP32 and Arduino, it includes SPI and GDI interfaces for versatile connectivity.
