Latest Components
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-ADEMA127KTZ SensorsDescription
The EVAL-ADEMA127KTZ Evaluation Kit is a two-board kit designed for the ADEMA124 and ADEMA127 Sigma-Delta ADCs, configured as a 3-phase meter. It includes current transformers for measuring A-, B-, and C-phase currents and features an application MCU board with an STM32H573. The kit can be interfaced via a GUI in the ACE software environment.
Manufacturer
Part #
Category
Melexis MLX90637 SensorsDescription
The Melexis MLX90637 Miniature Automotive Infrared Thermometer IC is a non-contact infrared temperature sensor designed for critical temperature monitoring in Electric Vehicle systems. It offers high-speed and accuracy, with a wide operating temperature range and a 50° field of view. This sensor is factory-calibrated and features an I2C interface for easy integration.
Manufacturer
Part #
Category
Melexis MLX90382 SensorsDescription
The Melexis MLX90382 Magnetic Position Sensor ICs combine a Triaxis® Hall magnetic front end with advanced signal processing capabilities. It is designed for high-speed angle tracking and can calculate both absolute and incremental positions of rotating magnets. The device is factory-trimmed for immediate use and offers multiple output modes for versatile applications.
Manufacturer
Part #
Category
M5Stack U203 SensorsDescription
The M5Stack Unit Fingerprint2 Sensor Module integrates an STM32 core controller and an A-K323CP all-in-one fingerprint recognition module. This high-performance sensor supports both dry and wet fingers and features a UART communication interface for easy integration. Ideal for applications like identity authentication and smart door locks, it offers high data security and flexible fingerprint data management.
Manufacturer
Part #
Category
M5Stack M003-V21 SensorsDescription
M5Stack GPS Module v2.1 with Antenna is a high-performance GNSS global positioning module that integrates M5Stack's AT6668 chip for accurate satellite positioning. It supports multiple satellite navigation systems and enables high-precision positioning with anti-interference capabilities. This module is ideal for applications in automotive, GIS, IoT positioning, and industrial automation.
Manufacturer
Part #
Category
Murata SCA3400-D01 SensorsDescription
Murata SCA3400 High-Performance 3-Axis (XYZ) Accelerometers are designed for industrial applications requiring stability and accuracy in harsh environments. They feature low noise density, good linearity, and high offset stability, making them ideal for Structural Health Monitoring and Inertial Measurement Units. With a robust design and advanced self-diagnostics, these accelerometers ensure exceptional performance.
Manufacturer
Part #
Category
u-blox ANN-MB3 SensorsDescription
The u-blox ANN-MB3 L1/L2/L5 Triple-Band Active GNSS Antennas are designed for high-precision GNSS applications requiring centimeter-level accuracy. They support the L1, L2, and L5 bands and integrate a notch filter for enhanced interference mitigation. This compact and reliable antenna streamlines evaluation and minimizes design efforts.
Manufacturer
Part #
Category
TDK InvenSense DK-42686-P SensorsDescription
The TDK InvenSense DK-42686-P Development Kit is a platform for the TDK ICM-42686-P Inertial Measurement Unit (IMU). It features an onboard Embedded Debugger and supports various communication interfaces for precise motion analysis. This kit is ideal for applications in gaming, sports, and robotics.
Manufacturer
Part #
Category
Texas Instruments TMAG5133 SensorsDescription
The TMAG5133 High Sensitivity Hall-Effect Switch is a low-power in-plane hall-effect switch designed to replace TMR, AMR, and Reed switches. It operates within a supply voltage range of 1.65V to 5.5V and is optimized for small form factors in various applications. Typical uses include electricity meter tamper detection, electronic smart locks, and door/window sensors.
Manufacturer
Part #
Category
iC-Haus iC-PZ2656 SensorsDescription
The iC-Haus iC-PZ2656 EVAL PZ1M Evaluation Kit includes a scanner module PZ1M assembled with iC-PZnnnn and the interface/motherboard PZ2D. The Scanner module PZ1M comes with a code disc or a linear scale and the motherboard PZ2D is supplied with a ribbon cable. This evaluation kit supports BISS/SSI communication with the iC-PZ module.
