Latest Components
Manufacturer
Part #
Category
Sensirion SCD43 SensorsDescription
The Sensirion SCD43 CO2 Sensor Evaluation Kit features an SCD43 integrated on a development board, allowing quick testing for various applications. This compact, high-accuracy air quality sensor is designed to meet stringent building standards with a superior accuracy specification of ±(30ppm + 3% m.v.). The kit includes a development board, adapter cable, and jumper wire set, requiring the SEK-SensorBridge for operation.
Manufacturer
Part #
Category
Allegro MicroSystems APS11203 SensorsDescription
Allegro MicroSystems APS11203 24V Hall-Effect Switches are AEC-Q100-qualified, third-generation Hall-effect switches featuring chopper-stabilization for precision performance over industrial and automotive temperature ranges. These switches provide contactless sensing of magnetic fields and are designed to maximize system robustness with features like reverse-battery protection and overvoltage protection. The APS11203 is ideal for automotive, industrial, and consumer applications.
Manufacturer
Part #
Category
Syntiant SPM0192LR5H-1 SensorsDescription
The Syntiant SPM0192LR5H-1 SiSonic™ MEMS Microphone is a high Signal-to-Noise Ratio (SNR) and Acoustic Overload Point (AOP) microphone designed for superior performance in voice-enabled applications. It features a low-noise input buffer and a differential output amplifier, making it ideal for IoT devices and Active Noise Cancellation headsets. Its compact design and high sensitivity make it suitable for a variety of consumer electronics.
Manufacturer
Part #
Category
STMicroelectronics ISM6HG256X SensorsDescription
The STMicroelectronics ISM6HG256X Intelligent Inertial Measurement Unit (IMU) is a high-end, low-noise, low-power 6-axis IMU featuring dual 3-axis accelerometers and a 3-axis gyroscope. It enables edge computing with advanced features for context awareness and motion tracking, making it ideal for IoT applications. This device is designed for asset tracking, robotics, and factory automation.
Manufacturer
Part #
Category
Infineon Technologies 121793611 PowerDescription
Infineon Technologies LITIX™ Interior LED Driver for Automotive Ambient Lighting is a three-channel device designed to control RGB LEDs with a current up to 51.5 mA. It features a LIN interface for programming and diagnostic feedback, along with 32kB on-chip flash memory and 3kB SRAM. This driver allows for configuration of power stages in parallel for higher load currents.
Manufacturer
Part #
Category
Infineon Technologies OptiMOS 7 40V PowerDescription
Infineon Technologies OptiMOS™ 7 Optimized 40V N-Channel Power MOSFETs are designed for efficient power conversion in various applications, including motor control and battery management systems. They feature low on-state resistance and are available in multiple package options. These MOSFETs are ideal for use in cordless power tools and outdoor equipment.
Manufacturer
Part #
Category
Littelfuse VM500 PowerDescription
The Littelfuse VM500 3-Phase Voltage Monitoring Relay protects 3- and 4-wire 415V AC 50Hz systems and can be easily mounted on a DIN rail. It monitors undervoltage, overvoltage, phase loss, phase sequence, phase asymmetry, and neutral failure conditions, with adjustable trip thresholds and LED indicators for fault visibility. This relay is ideal for applications in building systems, industrial machines, refrigeration, and water and waste management.
Manufacturer
Part #
Category
Littelfuse EL500 PowerDescription
The Littelfuse EL500 Single Function Earth Leakage Relay is designed to measure leakage current and isolate faulty circuits. It features adjustable trip levels and times, LED indicators, and supports dual operation modes for safety compliance. Ideal for use in industrial, commercial, and critical systems.
Manufacturer
Part #
Category
Silicon Labs SixG301-EK2719A PowerDescription
The Silicon Labs SiXG301 Explorer Kit is an ultra-low-cost, small form factor development and evaluation platform for the SixG301 Wireless System-on-Chip (SoC). It is designed for rapid prototyping and concept creation of Internet of Things (IoT) applications, featuring a USB interface, onboard SEGGER J-Link debugger, and support for hardware add-on boards. This kit is ideal for developing energy-friendly connected IoT applications.
Manufacturer
Part #
Category
Advantech SOM-A350 PowerDescription
Advantech SOM-A350 COM-HPC® Size A Modules are powered by Intel® Core™ Ultra processors that combine a CPU, GFX, and NPU to achieve 32TOPS of artificial intelligence (AI) performance. The modules support advanced features like PCIe Gen5 and double LAN ports, along with a Quadra Flow Cooling System for optimal performance. With a Dual BIOS failsafe feature, these modules ensure minimal system downtime.
