Latest Components
Manufacturer
Part #
Category
M5Stack 195266540 ConnectorsDescription
M5Stack Cardputer Accessory Kit v1.1 is a repair kit designed for Cardputer v1.1 and addresses bent or broken pins on the Stamp-S3A main controller. This accessory kit includes the Stamp-S3A controller, ST7789V2 1.14-inch screen, L-shaped 2mm Hex wrench, and a pin label sticker. It is ideal for users facing issues due to frequent plugging and unplugging.
Manufacturer
Part #
Category
M5Stack Atomic Motion Base v1.2 PowerDescription
M5Stack Atomic Motion Base v1.2 is a high-performance servo and DC motor drive base designed for the Atom main control series. It features multiple interfaces for servo and DC motor control, along with integrated safety protection functions. This device is ideal for applications such as DC motor car control and servo robotic arm control.
Manufacturer
Part #
Category
M5Stack M5Stack Unit Mini ToF-90° SensorsDescription
M5Stack Unit Mini ToF-90° is an ultra-compact Time of Flight (ToF) ranging unit integrating the VL53L0X laser ranging module. It can measure targets within the range of 3cm to 200cm with a measurement accuracy of ±3% and 1mm resolution. This ToF unit features a laser wavelength of 940nm and operates within the 0°C to 40°C temperature range.
Manufacturer
Part #
Category
Molex 156081368 ConnectorsDescription
Molex Mini-Fit Tooling features ruggedized tools designed for use with Mini-Fit terminals. This comprehensive range of tooling products encompasses applicators, fully automatic machines, hand crimp tools, and insertion and extraction tools. Using the correct interconnect manufacturer's tooling is key for adhering to industry standards while maintaining the connector manufacturer's product warranty.
Manufacturer
Part #
Category
Texas Instruments TLV785 PowerDescription
The Texas Instruments TLV785 High-PSRR Low-Dropout (LDO) Linear Regulator sources 500mA of output current and is designed to provide a voltage source with high PSRR. It features an internal soft-start circuit to minimize inrush current and is stable with small ceramic capacitors. This LDO comes in a compact SOT-23 package, suitable for various applications.
Manufacturer
Part #
Category
XP Power BCT40T PowerDescription
XP Power BCT40T PCB-Mount DC-DC Converters deliver an output power of 40W in a compact metal package with 25.4mm x 25.4mm (1" x 1") dimensions. The highly efficient BCT40T series features regulated single outputs from 3.3VDC to 24VDC and dual outputs at ±12V and ±15VDC. Ideal for information technology equipment, robotics, communications, and industrial applications.
Manufacturer
Part #
Category
Cirrus Logic CS530x SemiconductorsDescription
The Cirrus Logic CS530x High Performance Analog-to-Digital Converters (ADCs) feature high-resolution 32-bit digital architecture with support for differential analog input. These ADCs operate at sample rates up to 768kHz and are configurable via I2C and SPI modes. Ideal for applications such as A/V receivers and digital mixing consoles, they come in a compact 48-pin QFN package.
Manufacturer
Part #
Category
Texas Instruments TPS4816-Q1 PowerDescription
The Texas Instruments TPS4816-Q1 Low IQ Smart High-Side Switch Controllers feature protection and diagnostics with a wide operating voltage range of 3.5V to 95V. It includes a strong GATE driver for power switching and integrates a pre-charge driver for large capacitive loads. This device is AEC-Q100 automotive qualified and suitable for various automotive system designs.
Manufacturer
Part #
Category
Cirrus Logic CS250x & CS2600 SemiconductorsDescription
The Cirrus Logic CS250x and CS2600 Timing Devices were developed to supply superior audio experiences in automotive and professional audio applications. These devices generate stable, low-jitter clocks, providing an ideal clocking solution for audio networks. They enable downstream audio-data converters and digital audio systems to maximize performance while maintaining synchronization.
Manufacturer
Part #
Category
Jonard Tools FLS-50S OptoelectronicsDescription
The Jonard Tools FLS-50S Mini Optical Light Source is designed to provide 1310nm or 1550nm wavelengths for single-mode fiber measurements. It features a built-in 2mW visual fault locator and network cable tester, making it versatile for various applications. The device includes multiple modulation outputs and adapters for direct connection to fiber connectors.
