Latest Components
Manufacturer
Part #
Category
DFRobot SEN0680 SensorsDescription
The DFRobot RS485 Fluorescence Dissolved Oxygen Sensor provides a high-stability solution for measuring dissolved oxygen in both freshwater and high-salinity marine environments. It operates on the principle of fluorescence quenching, delivering a high-accuracy measurement range of 0mg/L to 20mg/L with an error of just ±3% FS. With an IP68 waterproof rating, it is ideal for applications such as aquaculture, wastewater treatment, and environmental monitoring.
Manufacturer
Part #
Category
ScioSense LTDC-X3 SensorsDescription
The ScioSense LTDC-X3 Time-to-Digital Converter (TDC) features a two-channel design with high time measurement resolution and output data rate, making it ideal for LiDAR systems. It offers a single-shot resolution of up to 20ps RMS and can measure both rising and falling edges of pulses. This TDC is optimized for various applications including drones, robots, and industrial safety scanners.
Manufacturer
Part #
Category
DFRobot DFR1154 SensorsDescription
The DFRobot DFR1154 ESP32-S3 Artificial Intelligence (AI) Camera Module is a feature-rich imaging solution built around the high-performance ESP32-S3 chip. It integrates a 160° wide-angle infrared OV3660 camera, onboard microphone, and speaker interface, enabling effective imaging and monitoring both day and night. This module supports advanced AI functions, making it suitable for various IoT applications.
Manufacturer
Part #
Category
Infineon Technologies KITTRAVEOT2GBHMC1 PowerDescription
The Infineon Technologies TRAVEO™ System Motor Control Kit is designed to demonstrate the advanced motor control capabilities of the TRAVEO CYT4BF microcontroller. It includes a motor, power board, drive card, and power supply for a complete out-of-the-box experience. Users can rapidly prototype and test designs using dedicated code examples with Infineon's ModusToolbox™.
Manufacturer
Part #
Category
Texas Instruments TLA431/TLA432 SemiconductorsDescription
Texas Instruments TLA431/TLA432 All-Capacitor Precision Programmable References are three-terminal adjustable shunt regulators that are stable with all capacitor loads. These devices are ideal replacements for Zener diodes in various applications, including onboard regulation and adjustable power supplies. They offer an output voltage range from 2.495V to 36V and operate over a temperature range of -40°C to +125°C.
Manufacturer
Part #
Category
DFRobot MBT0050x PowerDescription
DFRobot MBT0050x Maqueen Plus V3 micro:bit Robots are advanced STEM-focused educational platforms designed for robotics learning. They feature high-precision environmental perception and intelligent obstacle detection, making them suitable for competitions. With built-in algorithms and flexible power options, these robots empower students to explore advanced robotics concepts.
Manufacturer
Part #
Category
Vishay ISO-AC-VSAO PowerDescription
The Vishay ISO-AC-VSAO Reference Design focuses on voltage-sensing solutions for high AC-voltage applications that require an isolated high-voltage sensing circuit. It utilizes the Vishay VIA0250DD isolation amplifier and a voltage divider with TNPV resistors to scale down high voltage inputs. This design provides an isolated, amplified analog signal suitable for interfacing with ADCs or multimeters.
Manufacturer
Part #
Category
Nexperia NEVB-NPS7601 PowerDescription
The Nexperia NEVB-NPS7601 Load Switch Evaluation Board helps engineers test the NPS7601 device's performance across different applications. It features a low-loss integrated load switch with built-in reverse current blocking, short-circuit protection, and thermal shutdown. This evaluation board provides access to multiple power inputs and probe points for measurement and analysis.
Manufacturer
Part #
Category
M5Stack 181557830 ConnectorsDescription
The M5Stack Atomic ToUnit Base Interface Adapter Board is designed specifically for the Atom series controllers. It converts the Atom controller’s bottom expansion I/O into a male HY2.0-4P connector, allowing direct connection to Unit series devices. This board is equipped with a DIP switch for flexible configuration of the Atom bottom I/O connections.
Manufacturer
Part #
Category
Kycon KDMI42X ConnectorsDescription
Kycon KDMI42X HDMI Connectors feature enhanced metal shields that provide better ESD/EMI protection and low impedance mismatch. They are available with and without a panel mount flange, offering flexibility for different design needs. Constructed from UL94V-0-rated PBT thermoplastic with gold-plated copper alloy contacts, these connectors are ideal for consumer electronics.
