Latest Components
Manufacturer
Part #
Category
Phoenix Contact VL3 FPM PowerDescription
Phoenix Contact VL3 FPM Flat-Screen Touch Monitors are designed to extend the VL3 panel PC portfolio, offering a blend of aesthetics and functionality. These monitors provide enhanced connectivity options, including two USB outputs and optional VGA, DP, or HDMI signals. Ideal for industrial automation and monitoring applications, they are available in various display sizes.
Manufacturer
Part #
Category
Omron Electronics G9KJ PowerDescription
Omron Electronics G9KJ PCB High-Power Relays are compact PCB relays optimized for precharge circuits in 1500V DC systems. They offer a significant reduction in size and weight compared to conventional screw-type relays, with PCB terminals that simplify installation. Ideal for energy storage systems and EV charging stations, these relays feature a 530mW coil consumption.
Manufacturer
Part #
Category
CONXALL MULTI-CON-X/MAXI-CON-X ConnectorsDescription
CONXALL MULTI-CON-X / MAXI-CON-X 0.570" OD Sealed Backshells are designed for larger cable sizes with a maximum diameter of 0.570". They are engineered for harsh environments, featuring an IP68 rating when properly installed. The backshells are made from durable materials including black polybutylene terephthalate and include a secure-grip cable clamp for enhanced retention.
Manufacturer
Part #
Category
TDK ACM12V-TL05 PowerDescription
TDK ACM12V-TL05 Common Mode Choke is an AEC-Q200-qualified common-mode choke designed for automotive DC power lines. It supports a rated voltage of up to 500V DC and handles currents of up to 13A with a low DC resistance of 6mΩ. The choke offers high impedance, typically 700Ω at 100MHz, effectively suppressing common-mode noise.
Manufacturer
Part #
Category
Fair-Rite 129020300 PassivesDescription
Fair-Rite Oval Ferrite Snap-It® Cores allow for two cables to be run side-by-side. They are ideal for common-mode chokes, as a filter for inductive circuits, and bus bars. The Snap-It Cores offer several mounting options and are automotive-designed.
Manufacturer
Part #
Category
M5Stack Atomic ToChain ConnectorsDescription
The M5Stack Atomic ToChain Base Interface Adapter Board includes reserved solder pad designs for flexible configuration of the Atom bottom I/O. It converts the Atom controller’s bottom expansion I/O into a male HY2.0-4P connector for easy access to Chain series devices. This board is specifically designed for seamless connectivity between Atom and Chain series devices.
Manufacturer
Part #
Category
Texas Instruments SN74ACT3G98/-Q1 SemiconductorsDescription
The Texas Instruments SN74ACT3G98/-Q1 features three independent 98-function configurable logic gates with Schmitt trigger inputs. It is designed for automotive applications and supports a variety of logic roles. This component is ideal for combining power-good and enable signals while eliminating slow or noisy input signals.
Manufacturer
Part #
Category
Qorvo RFFC2071/2072 SemiconductorsDescription
Qorvo RFFC2071/2072 2.7GHz RF Synthesizer/VCOs are reconfigurable frequency-conversion devices with an integrated fractional-N phase-locked loop (PLL) synthesizer and a voltage-controlled oscillator (VCO). They allow users to generate local oscillator (LO) signals from 85MHz to 2700MHz and can be configured for low-power operation. These devices are ideal for applications such as digital TV repeaters and software-defined radios.
Manufacturer
Part #
Category
Qorvo QPD1011AEVB SemiconductorsDescription
The Qorvo QPD1011AEVB Evaluation Board is a fully assembled RF evaluation board designed for the QPD1011A GaN-on-SiC input-matched transistor. It facilitates device characterization and amplifier prototyping in the 100MHz to 1GHz band, featuring a 50Ω input match and tunable output network. This board is ideal for applications in wideband and narrowband RF power stages for communications, radar, and test instrumentation.
Manufacturer
Part #
Category
TDK Corporation AXO315T1 SensorsDescription
The Tronics AXO315®T1 is a high-temperature MEMS accelerometer designed for measurement while drilling (MWD) applications, capable of operating up to +175 °C. It features a ±14 g input range and offers a digital interface, making it a cost-effective alternative to quartz accelerometers. With a lifetime exceeding 1000 hours at high temperatures, it is ideal for precise downhole navigation in extreme environments.
