Latest Components
Manufacturer
Part #
Category
HellermannTyton CTSM3CZS ConnectorsDescription
HellermannTyton CTSM3CZS Saddle Mounts are feature-rich cable mounts designed for stability and convenience in wire bundling. They accommodate various cross-section cable ties and include features like EZ Feed and CutZone for easy installation and removal. Ideal for applications in industrial automation and robotics.
Manufacturer
Part #
Category
ROHM Semiconductor JMZV8.2B SemiconductorsDescription
ROHM Semiconductor JMZV8.2B 5mA Zener Diodes come in a small power mold package (PMDE) and are suitable for voltage regulation applications. The zener voltage for these devices is between 8.02V and 8.36V at 5.0mA. These diodes have a maximum power dissipation of 1000mW and a maximum junction temperature of +150°C.
Manufacturer
Part #
Category
Vishay RNC55 PassivesDescription
Vishay RNC55 Metal Film Resistors are MIL-PRF-55182 qualified and offer a low noise rating of -40dB. An epoxy coating provides superior moisture protection, and they feature a verified failure rate and controlled temperature coefficient. These resistors support a maximum working voltage of 350V and a maximum power rating of 0.5W.
Manufacturer
Part #
Category
Abracon AMELH5050S PowerDescription
Abracon AMELH5050S Power Inductors offer a 5.5mm x 5.3mm x 4.8mm package size with excellent current capacity of up to 40A and ultra-low DCR, down to 1.1mΩ. These flat-wire / hot-pressed molded power inductors provide soft saturation and shielded construction for low EMI, making them ideal for high-density designs.
Manufacturer
Part #
Category
Abracon AMELH5020S PowerDescription
Abracon AMELH5020S Power Inductors feature high saturation current (7A to 37A) and low DCR (2.1mΩ to 41.5mΩ) in a compact package with 5.5mm x 5.3mm x 1.9mm dimensions. These inductors operate in a -40°C to +125°C temperature range and are designed for applications in consumer electronics, industrial electronics, and telecom equipment. They are RoHS/RoHS II compliant and offer ultra-low AC losses and soft saturation characteristics.
Manufacturer
Part #
Category
Nexperia BUK6Q12-40PJ SemiconductorsDescription
Nexperia BUK6Q12-40PJ MOSFET is a 40V, automotive, P-channel FET in an MLPAK33 (SOT8002-3) SMD plastic package using Trench MOSFET technology. This MOSFET is ideal for reverse polarity protection, high-speed line drivers, high-side load switches, and relay drivers. It is AEC-Q101 qualified and features side-wettable flanks for optical solder inspection.
Manufacturer
Part #
Category
Nexperia BUK6Q21-30PJ SemiconductorsDescription
Nexperia BUK6Q21-30PJ MOSFET is an automotive, 30V P-channel enhancement mode FET in a compact MLPAK33 package. It features logic-level compatibility and is suitable for applications such as reverse polarity protection and high-speed line drivers. This MOSFET is AEC-Q101 qualified, ensuring reliability in automotive environments.
Manufacturer
Part #
Category
Cosel PDA300 PowerDescription
Cosel PDA300 AC-DC Single Output Power Supplies offer a 300W power rating, 86% efficiency, and compact dimensions of 102mm x 42mm x 170mm. These power supplies include features such as auxiliary output, remote control, alarm signals, and parallel operation, making them suitable for various industrial applications. With a low-noise design that complies with international standards, they are ideal for factory automation and robotics.
Manufacturer
Part #
Category
ROHM Semiconductor BR25G-5 SemiconductorsDescription
ROHM Semiconductor BR25G-5 SPI BUS EEPROMs are 16Kbit serial EEPROMs with an SPI BUS interface and 4 million write cycles. They feature a 32-byte page size, a supply voltage range of 1.6V to 5.5V, and a maximum write time of 3.5ms. Typical applications include AV equipment, telecommunication equipment, and home electronic appliances.
Manufacturer
Part #
Category
ROHM Semiconductor RH7E04BBJFRA PowerDescription
The ROHM Semiconductor RH7E04BBJFRA is a -30V drain-source voltage and ±40A drain current rated automotive grade MOSFET that is AEC-Q101 qualified. It features a maximum drain-source on-state resistance of 7.52mΩ at -10V and is ideal for applications in Advanced Driver Assistance Systems (ADAS), lighting, and body applications. This MOSFET is designed for high efficiency and reliability in automotive environments.
