Latest Components
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EV183 PowerDescription
Monolithic Power Systems (MPS) EV183 Evaluation Boards are designed to demonstrate the capabilities of the MP183, a primary-side constant voltage (CV) regulator that provides accurate CV regulation without an optocoupler. These boards support buck, buck-boost, boost, and flyback topologies. The MP183 is ideal for IoT power supplies and features low standby power consumption.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) MP24881 PowerDescription
The MP24881 is a 60V, monolithic, synchronous step-down LED driver that delivers up to 1.1A of continuous LED current to high-power LEDs. It features a wide input voltage range of 10V to 60V and supports both PWM and analog dimming. With built-in protections and excellent dimming performance, it is ideal for various lighting applications.
Manufacturer
Part #
Category
Weidmuller PROeco II PowerDescription
Weidmuller PROeco II Power Supplies meet the demands of modern industrial applications with up to 95% efficiency. This high efficiency reduces energy usage and waste heat generation compared to the prior generation. The series is suitable for setting up power management systems and suits space-constrained applications, such as flat control cabinets in the field.
Manufacturer
Part #
Category
Delta Electronics LNA Arena Sport LED Drivers PowerDescription
Delta Electronics LNA Arena Sport LED Drivers are designed for worldwide use in outdoor stadiums and high-mast lighting. They feature outputs of 1200W, 1600W, and 1800W and conform to DALI-2, D4i, and RDM/DMX protocols, making them suitable for smart lighting solutions. With high efficiency and programmable output current, these drivers provide flicker-free lighting and immersive experiences for HDTV broadcasting.
Manufacturer
Part #
Category
Panasonic ASQM2 & ASQMR2 ConnectorsDescription
Panasonic Industrial Devices ASQM2 and ASQMR2 Turquoise Stroke Mini Switches are miniaturized through the use of 1 Form A and 1 Form B contacts, and they come in three options for terminals: solder, fork, and wire leads. These switches feature highly effective sealing with an IP67 protection rating for resistance against adverse environments. The ASQMR2 switches also offer a built-in resistor that enables the detection of disconnection and short circuits in wiring.
Manufacturer
Part #
Category
Vishay / Dale XO12C/XO22C/XO23C SemiconductorsDescription
Vishay / Dale XOxC Surface-Mount Oscillators come in an ultra-small package and feature input voltage ratings of 1.8V, 2.5V, and 3.3V. These oscillators offer tri-state enable and disable and are HCMOS compatible. Suitable applications include mobile communications, telecom devices, and industrial controls.
Manufacturer
Part #
Category
Texas Instruments LP-MSPM0G3519 PowerDescription
The Texas Instruments LP-MSPM0G3519 LaunchPad™ Development Kit is an easy-to-use evaluation module for the MSPM0G3519 Microcontroller Unit (MCU). It features an onboard debug probe for programming, debugging, and EnergyTrace™ technology, along with various user interface components. This USB-powered kit is ideal for applications in factory automation, appliances, and building automation.
Manufacturer
Part #
Category
Texas Instruments EV2500 ConnectorsDescription
Texas Instruments EV2500 Evaluation Module (EVM) is an interface board that enables a PC running Microsoft Windows with a compatible HID driver to communicate with the SMBus/I2C interfaces. It allows for 1MHz I2C and SMBus communication and full voltage translation for devices using 1.2V to 5V. Typical applications include laptops, smartphones, and wireless speakers.
Manufacturer
Part #
Category
Nisshinbo NLx333 SemiconductorsDescription
The Nisshinbo NLx333 Operational Amplifiers are single and dual rail-to-rail input and output OpAmps designed for low offset voltage and low supply current. They operate within a supply range of 2.1V to 5.5V and a temperature range of -40°C to 125°C, making them suitable for various applications including battery-powered equipment. These amplifiers also feature an integrated EMI filter to minimize noise interference.
Manufacturer
Part #
Category
Texas Instruments DP83826Ax SemiconductorsDescription
Texas Instruments DP83826Ax 10/100Mbps Industrial Ethernet PHYs are deterministic, low-latency, and low-power devices that support 10BASE-Te and 100BASE-TX Ethernet protocols. They include hardware bootstraps for fast link-up time and are suitable for applications in factory automation, robotics, and industrial Ethernet systems. The PHYs feature two configurable modes for enhanced functionality.
