Latest Components
Manufacturer
Part #
Category
Texas Instruments LP5817 PowerDescription
The Texas Instruments LP5817 3-Channel RGB LED Driver has an ultra-low operation current of 0.1µA in shutdown mode and utilizes analog and PWM dimming methods for performance. Each LED's output current can be adjusted in 256 steps, providing precise control over brightness. It features a 400kHz I2C interface and operates within a temperature range of -40°C to 125°C.
Manufacturer
Part #
Category
Altera AGILEX SemiconductorsDescription
Altera Agilex™ FPGAs and SoCs accelerate innovation with a comprehensive portfolio of FPGA products merged by a single 2nd Generation HyperFlex™ architecture. The Agilex series offers high performance, lower power consumption, and small form factors, making them ideal for AI and DSP applications. These FPGAs are designed for a wide range of applications including industrial, medical, and defense.
Manufacturer
Part #
Category
onsemi NXH015F120M3F1PTG PowerDescription
The onsemi NXH015F120M3F1PTG Silicon Carbide (SiC) Module features a 15mΩ/1200V M3S SiC MOSFET full-bridge topology and a thermistor with Al2O3 DBC in an F1 package. It operates at +22V/-10V gate source voltage with a continuous drain current of 77A at 80°C. This module is ideal for applications such as solar inverters and electric vehicle charging stations.
Manufacturer
Part #
Category
Raspberry Pi SC173x PowerDescription
Raspberry Pi SC173x 45W USB-C® Power Supplies are designed for devices or applications that require a 45W power supply. These high-quality power supplies feature 1000V to 240V AC 50/60Hz input and a 1.5M 17AWG output cable. They deliver multiple voltage ratings including 5.1V/5A, 9V/5A, 12V/3.75A, 15V/3A, and 20V/2.25A.
Manufacturer
Part #
Category
Texas Instruments TAS6754-Q1 PowerDescription
The Texas Instruments TAS6754-Q1 Class-D Audio Amplifier is a four-channel digital-input amplifier that utilizes 1L Modulation, requiring only one inductor per BTL channel. This design reduces system size and cost while improving efficiency. It features real-time load diagnostics and low-latency signal processing for advanced audio applications.
Manufacturer
Part #
Category
Texas Instruments TLC69628-Q1 PowerDescription
Texas Instruments TLC69628-Q1 48-Channel LED Driver can provide up to 16-bit individual pixel-level LED PWM control. It features an adaptive headroom voltage control scheme to optimize power efficiency and supports high-speed communication through a serial peripheral interface. This driver is AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments TLC69637-Q1 PowerDescription
Texas Instruments TLC69637-Q1 48-Channel LED Drivers can provide up to 16-bit individual pixel-level LED PWM control. It features an adaptive headroom voltage control scheme to optimize power efficiency and supports a high-speed SPI interface for communication. This device is AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments TLC69638-Q1 PowerDescription
The Texas Instruments TLC69638-Q1 48-Channel LED Driver provides up to 16-bit individual pixel-level LED PWM control with an additional 7-bit dot correction for each channel. It supports a serial peripheral interface (SPI) for up to 511 devices, making it versatile for various applications. This driver is AEC-Q100 qualified for automotive applications and features adaptive headroom voltage control for optimized power efficiency.
Manufacturer
Part #
Category
Auvidea M15E ConnectorsDescription
The Auvidea M15E M.2 5GbE Add-on Card is designed to enhance camera performance and support 5GigE vision cameras. It is based on the Realtek RTL8126 and is compatible with NVIDIA Jetson Orin NX/AGX. This low power card features a PicoBlade 10-pin connector and comes in compact dimensions of 22mm x 30/42mm.
Manufacturer
Part #
Category
Auvidea 70426-LC PowerDescription
The Auvidea X410 Carrier Board for NVIDIA AGX Orin is designed for system integrators, offering enhanced flexibility with low-profile connectors and various adapter options. Its flat underside design minimizes the risk of short circuits or interference during integration. This board is compatible with the Jetson AGX Orin module and features multiple connectivity options.
