Latest Components
Manufacturer
Part #
Category
Abracon ABM12N PassivesDescription
Abracon ABM12N Quartz Crystals are IoT-optimized ultra-miniature AT-Cut MHz quartz crystals offered in a 1.6mm x 1.2mm x 0.4mm four-pad SMD package. These crystals provide a tight frequency accuracy of ±10ppm and stability of ±15ppm over an operating temperature range of -40°C to 85°C. They are ideal for wearables, IoT, and Bluetooth applications.
Manufacturer
Part #
Category
Infineon Technologies USB0010 ConnectorsDescription
Infineon Technologies USB0010 USB Dongle is used to communicate with Infineon digital controllers and digital POL converters through an XDP™ designer GUI. This dongle can be converted to I2C bus voltages of 2.5V or 1.8V and is ideal for USB to I2C communication. It is powered by the 5V USB supply and requires no external power supply.
Manufacturer
Part #
Category
ODU 196159764 ConnectorsDescription
ODU AMC® Protective Caps are designed for receptacles GK size 0, size 3, or G6 and G8. These caps feature greater than 55dB shielding effectiveness and operate within a temperature range of -51°C to 125°C. They are IP6K7 rated and comply with the UL 94 (V1) flammability standard.
Manufacturer
Part #
Category
Siretta QMA-ADAPTER ConnectorsDescription
Siretta RF Adapters are compatible with the QMA range of RF connectors. These adapters connect different configurations of cable termination or allow the exchange or change of the length of an RF link. RF adapters from Siretta offer various options that are ideal for common industry-standard configurations used in the industrial environment.
Manufacturer
Part #
Category
TE Connectivity E-Motor Temperature Sensors SensorsDescription
TE Connectivity's E-Motor Temperature Sensors are designed for industrial and motor stator temperature monitoring. They come in PT and NTC types, both featuring high precision and sensitivity. With a temperature range of -40°C to +200°C, they are ideal for applications like battery energy storage systems and electrical control cabinets.
Manufacturer
Part #
Category
Amphenol Procom CXL 70-5C/H ConnectorsDescription
The Amphenol Procom CXL 70-5C/H Colinear Antenna is a 5dBd, vertically polarized, omnidirectional antenna designed for base station and marine applications covering the 440MHz to 470MHz band. It features a robust construction with a high-quality glass fibre tube and is suitable for mounting on various mast tube diameters. This antenna is engineered to minimize noise from atmospheric discharges, ensuring reliable performance in challenging environments.
Manufacturer
Part #
Category
Nexperia ES3D SemiconductorsDescription
Nexperia ES3D Hyperfast Recovery Rectifier is a 200V, 3A rectifier with high forward surge capability. It features a glass passivated chip junction and offers a hyperfast recovery time of ≤35ns. This rectifier is ideal for automated placement and is used in various applications including rectification and reverse polarity protection.
Manufacturer
Part #
Category
Texas Instruments SN74LV74A/SN74LV74A-Q1 SemiconductorsDescription
Texas Instruments SN74LV74A/SN74LV74A-Q1 Dual D-Type Flip-Flops are positive-edge-triggered D-type flip-flops designed for 2V to 5.5V VCC operation. These devices are fully specified for partial-power-down applications using Ioff, preventing damaging current backflow. The devices are AEC-Q100 qualified for automotive applications and have a temperature range of -55 to +105°C.
Manufacturer
Part #
Category
Texas Instruments SN74HCT157 SemiconductorsDescription
The Texas Instruments SN74HCT157 Quad 2-to-1 Line Data Selectors/Multiplexers provide full data selection to four output gates with integrated drivers and inverters. It features a separate strobe input and can select a 4-bit word from two sources. This component is ideal for data routing and switching applications.
Manufacturer
Part #
Category
Texas Instruments SN74HCT139 SemiconductorsDescription
Texas Instruments SN74HCT139 Dual 2-to-4 Line Decoders/Demultiplexers are made of two individual 2-line to 4-line decoders in a single package. The active-low enable (G) input can be used as a data line in demultiplexing applications. These decoders feature fully buffered inputs, representing only one normalized load to its driving circuit.
