Latest Components
Manufacturer
Part #
Category
STMicroelectronics L98GD8E SemiconductorsDescription
The STMicroelectronics L98GD8E is an 8-channel MOSFET pre-driver configurable for low-side, high-side, peak and hold, and H-bridge load control. It supports 12V, 24V, and 48V vehicle battery systems and offers comprehensive diagnostic features and safety functions. The device is designed for automotive applications, providing PWM control and protection against short circuits and overcurrent.
Manufacturer
Part #
Category
Hirose Electric IT18 COM-HPC ConnectorsDescription
The IT18 COM-HPC® Low-Profile BGA Mezzanine Connectors are advanced mezzanine connectors designed for next-generation COM-HPC embedded computing. They offer stacking heights of 5mm and 10mm with an open pin field for layout flexibility and feature a BGA pin-in-ball structure for enhanced mounting reliability. Ideal for embedded computing, servers, industrial automation, and medical imaging systems requiring space-saving, high-speed connectivity.
Manufacturer
Part #
Category
Mikroe Current 15 Click SensorsDescription
The Mikroe Current 15 Click features the Allegro Microsystems ACS37100LMATR-050B3 TMR current sensor for bidirectional current measurement in high-power embedded applications. It provides current monitoring over an input range of ±50A with a typical sensitivity of 26.4mV/A and includes an onboard 12-bit ADC for digital output. This sensor is designed for applications such as on-board chargers, DC-DC converters, server power systems, and DC EV charging systems.
Manufacturer
Part #
Category
Mikroe BLDC FOC Click SemiconductorsDescription
The Mikroe BLDC FOC Click features the Texas Instruments MCF8329A sensorless Field Oriented Control (FOC) three-phase BLDC gate driver for code-free control of three-phase BLDC and PMSM motors. It integrates three half-bridge gate drivers and supports a 5V to 30V input supply range with internal charge pump and bootstrap circuit for 100% duty-cycle operation. This module is ideal for applications such as cordless vacuum cleaners, appliance fans, pumps, and power tools.
Manufacturer
Part #
Category
Mikroe LTE Cat.1 5 Click for Europe SemiconductorsDescription
The Mikroe LTE Cat.1 5 Click for Europe features the Sequans GC02S1-EU2 3GPP LTE Release 14 Cat 1 bis-compliant module for 4G LTE cellular connectivity in European IoT, M2M, and consumer applications. It supports LTE bands B1, B3, B8, B20, and B28 with data rates up to 10Mbps downlink and 5Mbps uplink. The module offers UART communication, firmware upgrade support, hardware flow control, and 1.8V uSIM card support.
Manufacturer
Part #
Category
Bourns MH1608A Passive ComponentsDescription
Bourns MH1608A High-Current Chip Ferrite Beads feature a compact size, low profile, and low DC resistance, with a rated current of up to 5A. These chip ferrite beads provide high impedance to suppress high-frequency noise in high-density PCB assemblies and are AEC-Q200 compliant and automotive-grade. They are ideal for EMI suppression in power supplies and RF lines with a wide operating temperature range from -55°C to +150°C.
Manufacturer
Part #
Category
Mikroe MPRSS0250KA00000C SensorsDescription
The Mikroe Pressure 27 Click is based on the Honeywell MPRSS0250KA00000C 250kPa absolute pressure sensor, designed for stable digital pressure monitoring in low-pressure sensing applications. It features a miniature piezoresistive silicon sensing element with factory calibration and temperature compensation, along with an integrated ASIC for offset, sensitivity, temperature, and non-linearity correction. The board supports a 4-wire SPI interface, sensor reset, end-of-conversion monitoring, and is compatible with mikroBUS™.
Manufacturer
Part #
Category
Mikroe 110979693 SemiconductorsDescription
The Mikroe LTE Cat.1 5 Click for North America is based on the Sequans GC02S1-NA2 3GPP LTE Release 14 Cat 1 bis-compliant module, designed for 4G LTE cellular connectivity in North American IoT, M2M, and consumer applications. It supports multiple LTE bands and offers UART communication with hardware flow control, firmware upgrade support, and multiple interfaces including I2C, UART, and USB. The module is suitable for applications such as utility meters, industrial sensors, security systems, payment terminals, and smart home devices.
Manufacturer
Part #
Category
NEUTRIK opticalCON D-Size ST Chassis Connector ConnectorsDescription
The NEUTRIK opticalCON D-Size ST Chassis Connector is an ST feedthrough solution in a D-size format designed for easy integration of fiber connections. It features a robust construction with a bayonet coupling, front mounting, and supports up to 5000 mating cycles. Suitable for AV, broadcast, and installation applications, it operates within a temperature range of -40°C to +80°C.
Manufacturer
Part #
Category
Mikroe DAC 24 Click SemiconductorsDescription
Mikroe DAC 24 Click is a compact add-on board for digital-to-analog conversion featuring gain control, offset adjustment, and programmable analog voltage output. It is based on the BD79701FVM-LB, a 3-channel, 8-bit R-2R DAC from ROHM Semiconductor, with a high-speed output response and a 3-wire SPI interface. Ideal for industrial equipment, battery-powered devices, and embedded systems requiring DAC functionality.
