Latest Components
Manufacturer
Part #
Category
Semtech SMBJxA SemiconductorsDescription
Semtech SMBJxA Electrostatic Discharge (ESD) Protection Diodes are designed to protect sensitive electronics from latch-up due to lighting, Electrical Overstress (EOS), and Cable Discharge Event (CDE). These unidirectional diodes offer a 600W peak power dissipation at 10x1000μs pulse and feature fast response time, low operating voltage, and low clamping voltage. Ideal for industrial equipment, telecom, and datacom applications.
Manufacturer
Part #
Category
Texas Instruments TIEVM-MTR-HVINV PowerDescription
Texas Instruments TIEVM-MTR-HVINV MCU Evaluation Module (EVM) is a 750W development board for high-voltage motor drive applications. This evaluation module implements sensorless FOC control for a three-phase permanent-magnet synchronous motor (PMSM) with the InstaSPIN-FOC FAST and eSMO sensorless observers. The modular design allows plug-and-play support of different daughterboard attachments to the same motherboard.
Manufacturer
Part #
Category
Solidigm D5-P5336 PowerDescription
Solidigm D5-P5336 122.88TB Solid State Drives (SSDs) are powered by Arm® high-performance and power-efficient technology. These SSDs are designed to deliver improved storage efficiency from the core data center to the edge. The D5-P5336 SSDs feature improved power density and are ideal for data-intensive applications.
Manufacturer
Part #
Category
Qorvo QM45655 PowerDescription
The Qorvo QM45655 Wi-Fi® 7 Front End Module (FEM) is designed for Wi-Fi 7 (802.11be) systems, featuring a compact layout with integrated matching. It supports a wide supply voltage range and multiple TX modes to optimize output power and efficiency. This module integrates a power amplifier, ANT switch, and low-noise amplifier into a single device.
Manufacturer
Part #
Category
Texas Instruments LM3645 PowerDescription
The Texas Instruments LM3645 LED Driver IC is a synchronous boost quad LED flash driver with a 2A high-side current source, providing a high level of adjustability within a compact solution. It features quad-high-side current sources to regulate LED current over a 2.3V to 5.5V input voltage range and is ideal for applications such as camera phones and digital still cameras. The device operates in a temperature range of -40°C to 85°C and includes an I2C-compatible interface for control.
Manufacturer
Part #
Category
Texas Instruments SN74AVCH8T245 SemiconductorsDescription
The Texas Instruments SN74AVCH8T245 8-Bit Noninverting Bus Transceivers use two separate configurable power-supply rails, allowing for universal low-voltage bidirectional translation between various voltage nodes. It is designed for asynchronous communication between data buses and features control inputs for direction and output enable. With a maximum data rate of 320Mbps, it is suitable for personal electronics and industrial applications.
Manufacturer
Part #
Category
Texas Instruments LMK5C22212AS1 PowerDescription
The Texas Instruments LMK5C22212AS1 Network Synchronizer is a high-performance jitter cleaner designed for wireless communications and infrastructure applications. It features two DPLLs for hitless switching and jitter attenuation, with programmable loop bandwidth and no external loop filters. This device is fully programmable through SPI or I2C and includes integrated EEPROM for customizable system start-up clocks.
Manufacturer
Part #
Category
KOA Speer WN73H PassivesDescription
KOA Speer WN73H Metal Thin Film Chip Resistors are high-power, wide-termination, and high-precision resistors suitable for automotive, medical, and industrial applications. They offer power ratings of 0.3W in a 0603 package and 1W in a 1206 package, with resistance values ranging from 10Ω to 100kΩ. These resistors provide high-precision tolerances as low as ±0.1% and a temperature coefficient of resistance (TCR) down to ±10ppm/°C.
Manufacturer
Part #
Category
Murata Electronics SCH16T-K10 SensorsDescription
Murata Electronics SCH16T-K10 6-DOF Gyroscopes and Accelerometers are high-performance sensors that combine a 3-axis angular rate and a 3-axis accelerometer. They feature selectable measurement ranges and extensive self-diagnostics, making them suitable for applications like drone flight controllers and inertial measurement units. Designed for high stability and reliability, these sensors are based on advanced 3D-MEMS technology.
Manufacturer
Part #
Category
Texas Instruments SN74AHC240/SN74AHC240-Q1 SemiconductorsDescription
Texas Instruments SN74AHC240/SN74AHC240-Q1 Octal Buffers/Drivers are designed to improve the density and performance of clock drivers, 3-state memory-address drivers, and bus-oriented transmitters and receivers. These devices are organized as two 4-bit buffers/line drivers with separate output-enable (OE\) inputs. The Texas Instruments SN74AHC240-Q1 devices are AEC-Q100 qualified for automotive applications.
