Latest Components
Manufacturer
Part #
Category
Renesas Electronics EK-RA2L2 PowerDescription
The Renesas Electronics EK-RA2L2 Evaluation Kit provides an entry point for evaluation, prototyping, and development with the RA2L2 MCU. It incorporates an emulator circuit that can be used without any hardware tools and includes breakout pin headers for easy access to all MCU signals. This kit is ideal for applications such as USB data loggers and EV chargers.
Manufacturer
Part #
Category
Texas Instruments TCAN245x-Q1 PowerDescription
The Texas Instruments TCAN245x-Q1 is a Signal Improvement Capable (SIC) CAN FD System Basis Chip (SBC) that supports data rates up to 8Mbps. It integrates a buck regulator that can output either 3.3V or 5V with a maximum output current of 1A, along with a 5V LDO for additional loads. This device is AEC-Q100 qualified for automotive applications and includes features for selective wakeup and fault diagnostics.
Manufacturer
Part #
Category
Texas Instruments TPD4S48x-Q1 PowerDescription
Texas Instruments TPD4S48x-Q1 USB Type-C® Port Protector ICs are single-chip USB Type-C port protection ICs that provide IEC ESD and 48V short-to-VBUS overvoltage protection. They enable the CC and SBU or USB2 pins to be 48V tolerant without interfering with normal operation by providing over-voltage protection. The device integrates IEC 61000-4-2 ESD protection for external pins, eliminating the need for additional high-voltage TVS diodes.
Manufacturer
Part #
Category
KYOCERA AVX 145492004 PassivesDescription
KYOCERA AVX High-Voltage SMD MLCCs provide high value, low leakage ratings, and a compact size suitable for high-voltage systems. These MLCCs feature a high-voltage chip design that exhibits low ESRs at high frequencies. They are designed for applications such as snubbers in high-frequency power converters, resonators in SMPS, and high-voltage coupling/DC blocking.
Manufacturer
Part #
Category
onsemi SZMMSZ52xT1G SemiconductorsDescription
onsemi SZMMSZ52xT1G Automotive Zener Voltage Regulators are robust, surface-mount devices designed to provide precise voltage regulation and overvoltage protection in automotive and industrial applications. They offer a wide breakdown voltage range from 2.4V to 110V and are qualified to AEC-Q101 standards for high reliability. Ideal for use in electronic control units, sensor interfaces, and battery management circuits.
Manufacturer
Part #
Category
Microchip Technology dsPIC33AK512MPS512 PowerDescription
The Microchip Technology dsPIC33AK512MPS512 General Purpose Dual In-Line Module (DIM) is designed to demonstrate the capabilities of the dsPIC33AK512MPS512 Digital Signal Controllers using the dsPIC33A Curiosity Platform Development Board. It features a keyed design with reduced socketing insertion force for correct board orientation.
Manufacturer
Part #
Category
Bulgin 6000 Series ConnectorsDescription
Bulgin 6000 Series Buccaneer HDMI Connectors deliver a robust, high-performance connectivity solution designed for demanding industrial environments. These tamperproof connectors are rated up to IP69K when mated and maintain full HDMI functionality while protecting against dust, water, and vibration. The 30° twist-lock mechanism allows for fast, secure mating and unmating.
Manufacturer
Part #
Category
Bulgin 6000 Series ConnectorsDescription
Bulgin 6000 Series Buccaneer Cat6A Connectors provide high noise immunity, full shielding, and EMI protection for rugged environments. These connectors are flame-retardant and chemical-resistant, offering an IP69K rating when mated. Ideal for automotive, marine, and industrial automation applications, they support data rates up to 10Gbps.
Manufacturer
Part #
Category
Ohmite RVK PassivesDescription
Ohmite RVK 4-Terminal Metal Alloy Current Sense Resistors offer low resistance of 0.5mΩ to 6mΩ and a low temperature coefficient of resistance (TCR) of ≤+50ppm/°C. The 4-terminal design allows for 0.5% resistance tolerance down to 0.0005Ω, providing high-current sensing and excellent long-term stability. These resistors are suitable for applications in power supplies, measuring instruments, and battery management systems.
Manufacturer
Part #
Category
Arduino ABX00137 PowerDescription
The Arduino ABX00137 Nano Matter Board is a compact development board designed for Matter and Thread-based IoT applications. It features a 32-bit Arm Cortex-M33 CPU with 1536kB Flash and 256kB RAM, supporting various wireless protocols including BLE and Zigbee. This board is ideal for developers looking to create secure, connected devices in small form factors.
