Latest Components
Manufacturer
Part #
Category
Texas Instruments SN74AC3G97/SN74AC3G97-Q1 SemiconductorsDescription
Texas Instruments SN74AC3G97/SN74AC3G97-Q1 Gates are triple configurable gates with Schmitt-trigger inputs. They offer three independent '97 function configurable logic gates that can be configured for various logic operations. The device is AEC-Q100 qualified for automotive applications, ensuring reliability in demanding environments.
Manufacturer
Part #
Category
Texas Instruments SN74AC2G101/SN74AC2G101-Q1 SemiconductorsDescription
Texas Instruments SN74AC2G101/SN74AC2G101-Q1 Gates feature two independent D-type flip-flops with rising-edge triggered configurable logic clock, active-low clear, and data inputs. The clock inputs can be arranged for multiple logic functions, including buffer, inverter, AND, OR, NAND, NOR, XOR, and XNOR. This device is AEC-Q100 qualified for automotive applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC2G100/SN74AC2G100-Q1 SemiconductorsDescription
Texas Instruments SN74AC2G100/SN74AC2G100-Q1 Dual Flip-Flops offer two independent D-type flip-flops with a rising-edge triggered clock and configurable logic data inputs. These flip-flops support various logic functions and are AEC-Q100 qualified for automotive applications. They are designed to operate in noisy environments and can handle slow edge-rate signals.
Manufacturer
Part #
Category
Microchip Technology dsPIC33AK512MPS506 PowerDescription
The Microchip Technology dsPIC33AK512MPS506 Digital Power Plug-In Module (PIM) is a demonstration board that showcases the features of the dsPIC33AK512MPS506 Digital Signal Controller (DSC). It provides access to high-speed ADC inputs, DAC output, PWM, and GPIO ports, making it suitable for various power applications. This PIM is designed to work with multiple development boards for enhanced flexibility.
Manufacturer
Part #
Category
Microchip Technology PIC16F175x SemiconductorsDescription
Microchip Technology PIC16F175x Low-Power 8-Bit Microcontrollers (MCUs) are designed to deliver high performance and energy efficiency for a wide range of embedded applications. These MCUs feature integrated op amps, high-speed 10-bit ADCs, and comparators, enabling precise analog signal conditioning and motor control. Ideal for industrial automation and portable devices, they simplify design and lower system costs.
Manufacturer
Part #
Category
Vishay 0201 PassivesDescription
Vishay Automotive 0201 Thick Film Chip Resistors are e3 standard thick film resistors that offer AEC-Q200 compliance for automotive environments. They feature a resistance range from 10Ω to 1MΩ, with a rated dissipation of 0.05W and an operating voltage of 30V. These resistors are suitable for automotive, telecommunication, and industrial applications.
Manufacturer
Part #
Category
Laird Technologies SF560 PowerDescription
Laird Technologies Tputty™ SF560 1-Part Dispensable Gap Fillers are designed to offer thermal conductivity of 5.6W/mK, along with superior thermal resistance. These gap fillers' silicone-free formulation and ultra-soft properties make them suitable for all automotive applications. The Tputty™ SF560 gap fillers are easily reworkable and meet RoHS and REACH requirements.
Manufacturer
Part #
Category
onsemi NV250x0LV SemiconductorsDescription
The onsemi NV250x0LV Low Voltage Automotive Grade 1 Serial EEPROMs are EEPROM Serial 1Kb, 2Kb, and 4Kb SPI devices designed for low-power automotive applications. They feature a 16-byte page write buffer, software and hardware write protection, and a high endurance of one million write cycles per byte. With a data retention of up to 200 years and an operating temperature range from -40°C to +125°C, these components are reliable for storing critical calibration and configuration data.
Manufacturer
Part #
Category
Arduino ABX00142 PowerDescription
The Arduino ABX00142 Nano R4 Evaluation Board is a compact and powerful development platform designed for makers, educators, and engineers working on embedded and IoT projects. It features the Renesas RA4M1 32-bit Arm Cortex-M4 microcontroller with built-in Wi-Fi and Bluetooth connectivity, making it ideal for wireless applications. With a compact form factor and multiple I/O options, it provides flexibility for various interfacing needs.
Manufacturer
Part #
Category
LEM CASR SensorsDescription
LEM CASR Board Mount Current Transducers are designed for accurate electronic measurement of DC, AC, and pulsed currents, covering a range from 1.5A to 75A RMS. They provide galvanic isolation between circuits and operate with a single +5V supply, ensuring enhanced safety and performance. With a compact design and extended measuring range, these sensors are ideal for various industrial applications.
