Latest Components
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVL28167-B-Q-00A PowerDescription
The EVL28167-B-Q-00A Evaluation Board is designed to evaluate MP28167-B integrated buck-boost converters with Power Good indication. It operates within a 2.8V to 22V input voltage range and features fast load transient responses. Ideal for USB Power Delivery sourcing ports and wireless charging applications.
Manufacturer
Part #
Category
onsemi NCP5892 PowerDescription
The onsemi NCP5892 Enhanced Mode GaN Power Switch integrates a high-performance, high-frequency Silicon (Si) driver and 650V Gallium-Nitride (GaN) High-Electron-Mobility Transistors (HEMT) in a single switch structure. This combination provides superior performance compared to discrete solutions while significantly reducing circuit and package parasitics. It is ideal for applications in power conversion and high power density power supplies.
Manufacturer
Part #
Category
Infineon Technologies TLE4241SYS_SHIELD PowerDescription
The Infineon Technologies TLE4241SYS_SHIELD Evaluation Board can be used as a standalone evaluation board for the adjustable current LITIX™ Linear TLE4241GM or as a shield for Arduino. It is designed for quick demos in blind spot indication applications and features an ultrasound sensor input, an integrated buzzer, and three LEDs. This board is ideal for automotive applications such as blind spot detection and corner radars.
Manufacturer
Part #
Category
Infineon Technologies TLD7002-16SYS_EVAL PowerDescription
The Infineon Technologies TLD7002-16SYS_EVAL Board is an evaluation platform for the LITIX™ Pixel Rear TLD7002-16ES LED driver. It features three snappable sections that can be configured for various system implementations, providing fail-safe operation and direct drive control. This board is ideal for automotive lighting applications.
Manufacturer
Part #
Category
ams OSRAM TSL2522 SensorsDescription
The ams OSRAM TSL2522 Highly Sensitive Ambient Light Sensor supplies two concurrent ambient light sensing channels, which can be connected to photodiodes through a programmable multiplexer. It features a set of Photopic and Infrared photodiodes for accurate ambient light measurement. This device is ideal for applications like display brightness management and camera auto exposure.
Manufacturer
Part #
Category
Maxtena MEA-700-2700-N ConnectorsDescription
The Maxtena MEA-700-2700-N Omnidirectional Antenna is a high-performance dipole antenna that operates across a broad frequency range of 700MHz to 2700MHz. It features an N-type connector, IP65 rating, and is designed for applications such as IoT and telematics. With a peak gain of 4.5dBi and 76% efficiency, this antenna is ideal for asset and fleet tracking.
Manufacturer
Part #
Category
Maxtena MEA-9in1-AM ConnectorsDescription
The Maxtena MEA-9in1-AM Adhesive Mount Antenna is a 9-in-1 low-profile antenna that supports 5GNR, ISM, MIMO, and GPS/GLONASS/QZSS/Galileo frequencies. It features a 50Ω impedance, 25W maximum input power, and an omnidirectional radiation pattern, making it ideal for various applications including telematics and IoT systems. With an IP67-rated housing, this antenna is designed for durability and easy installation.
Manufacturer
Part #
Category
Maxtena MEA-3IN1-5G-MM ConnectorsDescription
The Maxtena MEA-3IN1-5G-MM Magnet Mount Antenna is designed to maintain constant network connectivity with a low-profile and high-performance design. It covers 5GNR, ISM, and MIMO standard frequencies, featuring a 50Ω impedance and IP67-rated housing for durability. This antenna is ideal for applications such as IoT, LTE, SATCOM, and remote surveillance.
Manufacturer
Part #
Category
Maxtena MEA-5G-IMG-AM ConnectorsDescription
The Maxtena MEA-5G-IMG-AM Adhesive Mount Antenna is a 5-in-1 low-profile antenna designed for constant network connectivity. It supports 5GNR, ISM, MIMO, and GPS/GLONASS/QZSS/Galileo frequencies, featuring an omnidirectional radiation pattern and IP67/IP69 ratings. Ideal for applications in fleet management, smart cities, and HD video monitoring.
Manufacturer
Part #
Category
Infineon Technologies MOS7GENERICPOWBOARDTOBO1 PowerDescription
The Infineon Technologies MOS7GENERICPOWBOARDTOBO1 Evaluation Board is powered by the MOTIX™ TLE9879QXA40 System-on-Chip (SoC) featuring OptiMOS™ 7 MOSFETs. It can drive loads up to 400W at a battery voltage of 12V and is optimized for EMC and thermal performance. Typical applications include automotive fans, pumps, and 400W BLDC motors for 12V applications.
