Latest Components
Manufacturer
Part #
Category
Diodes Incorporated PI3DPX1235Q SemiconductorsDescription
The Diodes Incorporated PI3DPX1235Q 6:4 Crossbar Linear ReDriver supports DP link-training transparent for source-side applications. It complies with VESA DP Alt 2.1 UHBR13.5 and USB 3.2 gen two industry standards, optimizing signal performance by reducing inter-symbol interference jitters. This device features adjustable equalization, output swing, and gain values through I2C control.
Manufacturer
Part #
Category
Asahi Kasei Microdevices CQ36 SensorsDescription
Asahi Kasei Microdevices CQ36 Coreless Current Sensor ICs are designed for low heat generation even in continuous operation mode. These ICs include a built-in Delta-Sigma modulator that can replace a shunt resistor and isolated ADC. The CQ36 sensor ICs' ultra-low noise feature is realized by III-V compound semiconductor Hall elements.
Manufacturer
Part #
Category
Texas Instruments DRV8161EVM PowerDescription
Texas Instruments DRV8161EVM Driver Evaluation Module (EVM) is a 30A, three-phase brushless DC drive stage using three DRV8161 gate drivers for spinning BLDC motors. It allows quick evaluation of the DRV8161 device, which spins a BLDC motor with trapezoidal commutation and control. This module is suitable for various applications including servo drives and e-mobility.
Manufacturer
Part #
Category
Texas Instruments LMK5C33216AEVM PowerDescription
The Texas Instruments LMK5C33216AEVM Evaluation Module is designed for the LMK5C33216A network clock generator and synchronizer. It supports device evaluation, compliance testing, and system prototyping with features like programmable loop bandwidth and multiple clock outputs. The module includes SMA connectors and an onboard TCXO for versatile operation modes.
Manufacturer
Part #
Category
Texas Instruments LMK5C33414AEVM PowerDescription
The Texas Instruments LMK5C33414AEVM Evaluation Module is designed for the LMK5C33414A network clock generator and synchronizer, suitable for device evaluation and system prototyping. It features three digital PLLs and three analog PLLs with programmable loop bandwidth, along with SMA connectors for easy interfacing. The module can be configured via a USB microcontroller interface using TICS Pro software.
Manufacturer
Part #
Category
Texas Instruments LMR51635EVM PowerDescription
The Texas Instruments LMR51635EVM Converter Evaluation Module (EVM) helps designers evaluate the performance and operation of the LMR51635 wide-input synchronous buck regulator. It features a wide input voltage range of 4.3V to 60V and supports up to 3.5A continuous output current. This module is ideal for various industrial applications requiring power conditioning from an unregulated source.
Manufacturer
Part #
Category
Texas Instruments TLV61047EVM-038 PowerDescription
The Texas Instruments TLV61047EVM-038 Converter Evaluation Module (EVM) is designed to evaluate the TLV61047, a high-voltage, non-synchronous boost converter. It operates with an input voltage range of 2.6V to 20V and can output up to 28V with a peak switching current of 2.2A. This module is ideal for applications requiring 3V to 9V input and 12V output.
Manufacturer
Part #
Category
Renesas Electronics DA14594 PowerDescription
Renesas DA14594 Daughterboards are designed for use with the DA14594-006FDEVKT-P development kit. Each daughterboard can be easily attached to the motherboard of either the DA14594-006FDEVKT-P or the DA14592-016FDEVKT-P. These boards are equipped with Bluetooth SoCs for various applications including asset tracking and connected health.
Manufacturer
Part #
Category
Texas Instruments TMUX73XXF-EVM SemiconductorsDescription
The TMUX73XXF-EVM facilitates DC characterization and rapid prototyping of the TMUX73XXF series components in the TSSOP package. It features multiple test points for I/O and OVP trigger thresholds, making it ideal for testing. This evaluation module is suitable for applications in factory automation, programmable logic controllers, and data acquisition systems.
Manufacturer
Part #
Category
Texas Instruments bq21088EVM PowerDescription
The Texas Instruments bq21088EVM Battery Charger Evaluation Module is designed to evaluate the bq21088 device, an integrated battery-charge management IC for wearable devices. It supports charge currents up to 1A and SYS currents up to 3A, featuring advanced power path and low quiescent current for maximum battery life. The module includes various functionalities such as manual reset, ship mode, and USB2ANY port for I2C interfacing.
