Latest Components
Manufacturer
Part #
Category
Texas Instruments bq25188EVM PowerDescription
The Texas Instruments bq25188EVM Battery Charger Evaluation Module is designed to evaluate the bq25188 device, a 1A single-cell linear battery charger. It supports charge currents up to 1A and SYS currents up to 3A, featuring various functionalities for device evaluation. This module is ideal for applications in TWS headsets, smart glasses, and wearables.
Manufacturer
Part #
Category
Analog Devices Inc. AD8412A SemiconductorsDescription
The AD8412A Current Sense Amplifiers offer an initial gain of 10V/V with a 1.8MHz bandwidth and a maximum ±0.11% gain error over the entire temperature range. It features a minimum DC common-mode rejection ratio (CMRR) of 110dB from -2V to +50V, enabling bidirectional current measurements. This amplifier is ideal for various industrial and automotive applications.
Manufacturer
Part #
Category
Texas Instruments MCF8329RRYEVM PowerDescription
The Texas Instruments MCF8329RRYEVM Driver Evaluation Module (EVM) enables users to evaluate the performance of a 32-pin VQFN packaged MCF8329 motor driver. It includes an onboard FTDI chip for USB to UART communication and an MSP430FR2355 microcontroller for control signal translation. This module features user-selectable jumpers, resistors, connectors, and test points for comprehensive evaluation.
Manufacturer
Part #
Category
Texas Instruments DRV8351EVM PowerDescription
Texas Instruments DRV8351EVM Driver Evaluation Module (EVM) is used to evaluate the DRV8351, a gate driver IC for three-phase motor drive applications. It features high-accuracy trimmed half-bridge drivers capable of driving high-side and low-side N-type MOSFETs. The module includes reference software for motor control and system monitoring.
Manufacturer
Part #
Category
Texas Instruments ESD501/ESD501-Q1 SemiconductorsDescription
Texas Instruments ESD501/ESD501-Q1 Low Capacitance ESD Diode is offered in the industry standard 0402 (DFN1006) package and provides an IEC 61000-4-2 protection level of 15kV. The device can clamp 8/20µs surges with peak pulse currents up to 3A in accordance with the IEC 61000-4-5 standard. This protection is key for many applications, such as smaller form factors and faster data speeds.
Manufacturer
Part #
Category
Texas Instruments HDC3020FLXEVM SensorsDescription
The Texas Instruments HDC3020FLXEVM is a flexible printed circuit (FPC) based breakout sensor board designed for evaluating the HDC3020 digital relative humidity and temperature sensor. This compact evaluation board features exposed gold fingers for easy wire soldering and requires a host device with an I2C interface to read data. It is ideal for various applications, including IoT environmental sensors and air quality detection.
Manufacturer
Part #
Category
Analog Devices Inc. AD8412ARM-EVALZ SemiconductorsDescription
The Analog Devices AD8412ARM-EVALZ Evaluation Board is designed for easy configuration of different modes of operation and flexibility with loads. It supports the AD8412A Current Sense Amplifier, offering an initial gain of 10V/V and a bandwidth of 1.8MHz. This board is ideal for applications such as motor control and power rail monitoring.
Manufacturer
Part #
Category
Analog Devices Inc. ADAQ4216 PowerDescription
The Analog Devices ADAQ4216 µModule® Precision Data-Acquisition (DAQ) simplifies the development of precision measurement systems by integrating essential signal processing components. It features a maximum ±3ppm INL and operates within a temperature range of -40°C to +105°C. This compact solution is designed for high performance with a throughput of 2MSPS and a total system dynamic range of 123dB.
Manufacturer
Part #
Category
Texas Instruments LMK5B12212EVM PowerDescription
The Texas Instruments LMK5B12212EVM Evaluation Module is designed for the LMK5B12212 network clock generator and synchronizer, suitable for device evaluation and system prototyping. It features three digital PLLs and three analog PLLs with programmable loop bandwidth, along with SMA connectors for easy interfacing. The module can be configured via a USB microcontroller interface using TICS Pro software.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) MCQ1805 SensorsDescription
Monolithic Power Systems (MPS) MCQ1805 Hall-Effect Current Sensors are AEC-Q100 automotive-grade sensors designed for AC or DC current sensing. They feature a differential Hall array that cancels stray magnetic fields and provide fast Over-Current Detection (OCD) for monitoring faults. Ideal for automotive systems and motor controls, these sensors are available in a compact SOIC-8 package.
