Latest Components
Manufacturer
Part #
Category
Analog Devices Inc. ADL8122-EVAL1Z PowerDescription
The ADL8122-EVAL1Z Evaluation Board is a 4-layer PCB designed for RF applications, operating from 10kHz to 10GHz. It features SMA connectors for RF input and output, and is suitable for various electronic test and measurement applications. The board is built to withstand a wide temperature range from -55°C to +125°C.
Manufacturer
Part #
Category
onsemi AR0145CS SensorsDescription
The onsemi AR0145CS Hyperlux™ SG Image Sensor is a 1/4.3" CMOS digital image sensor featuring an active-pixel array of 1280 (H) x 800 (V). It incorporates a global shutter pixel design for accurate capture of moving scenes, producing clear images in various lighting conditions. This sensor is ideal for applications such as scanning, industrial inspection, and gesture recognition.
Manufacturer
Part #
Category
Murata Electronics GGM PassivesDescription
Murata Electronics GGM Water-Repellent Chip Multilayer Ceramic Capacitors (MLCCs) are designed for automotive powertrain and safety equipment. The water-repellent treatment film delays the formation of water droplets on the capacitor's surface, making it suitable for critical applications. These MLCCs are ideal for use in safety devices such as engine control units, airbags, and anti-lock braking systems.
Manufacturer
Part #
Category
Analog Devices Inc. EVAL-LT8350S-AZ PowerDescription
The EVAL-LT8350S-AZ Evaluation Board is based on the LT8350S 40V synchronous buck-boost converter, designed for high efficiency in a compact size. It operates with an input voltage range of 3V to 40V and can drive up to 2.5A load at 12V output. This board is ideal for automotive, industrial, and telecom applications.
Manufacturer
Part #
Category
Analog Devices Inc. LT8740 PowerDescription
The Analog Devices LT8740 Programmable Device Power Supply (DPS) offers high efficiency and performance with two switching power supplies delivering up to ±2A of current each at output voltages spanning 30V. It features integrated current sensing resistors for accurate output current measurement and a linear drive stage for non-switching ripple output. The device is controlled via a simple serial interface and is suitable for applications such as Automatic Test Equipment (ATE).
Manufacturer
Part #
Category
onsemi ARX383CS SensorsDescription
onsemi 0.3MP Image Sensor Evaluation Boards are designed to evaluate and develop imaging applications using an ARX383CS high-efficiency global shutter image sensor. These boards can be interfaced with the Demo3 Evaluation Board or the AP1302 Evaluation Board, providing flexibility in system configuration. This setup is ideal for developers looking to test and optimize imaging solutions efficiently.
Manufacturer
Part #
Category
Abracon ABM10AAIG & ABM11AAIG PassivesDescription
Abracon ABM10AAIG and ABM11AAIG Automotive-Grade Crystals are Automotive Grade 1 AT-Cut fundamental mode MHz quartz crystals in a two-pad SMD package. These crystals are AEC-Q200 qualified and designed for high reliability and durability. They are ideal for applications such as advanced driver assistance systems (ADAS) and vehicle-to-vehicle communication (V2V).
Manufacturer
Part #
Category
TAIYO YUDEN MBAS PassivesDescription
TAIYO YUDEN MBAS High-Dielectric Multilayer Ceramic Capacitors (MLCCs) offer a capacitance range of 0.01pF to 100μF and a maximum voltage rating of 630VDC. These capacitors are designed for high reliability and stability, making them suitable for telecommunication applications such as base stations and optical transceivers. They come with various dielectric options including X5R, X6S, X7R, X7S, and X7T.
Manufacturer
Part #
Category
Microchip Technology EV94T99A ConnectorsDescription
Microchip Technology EV94T99A Development Tool is an EVB-LAN9646 evaluation board that interfaces directly with the SAM9X75 host processor on the Curiosity platform. It features a 6-port LAN9646 L2 Gigabit Ethernet switch and supports various chip port interfaces. The board includes integrated copper PHY interfaces with RJ-45 jacks capable of auto-detection for 10/100/1000Gbps.
Manufacturer
Part #
Category
Microchip Technology EV64Z42A SensorsDescription
Microchip Technology EV64Z42A Development Tool is a hardware platform designed to assess the abilities of the MTCH2120 I2C-based touch turnkey. It provides noise-robust and water-tolerant touch button implementation for up to 12 buttons with an I2C interface to the host. The tool supports touch tuning, visualization, and validation via MPLAP data visualizer.
