Latest Components
Manufacturer
Part #
Category
Microchip Technology MCP16367 PowerDescription
Microchip Technology MCP16367 DC-DC Converters are highly integrated, high-efficiency, fixed-frequency, and step-down converters that supply 400 mA of continuous current while regulating the 2V to 24V output voltage range. They can operate in Pulse Frequency Modulation/Pulse Width Modulation (PFM/PWM) mode and feature fixed-frequency peak current mode control, internal compensation, and overtemperature protection. These converters are AEC-Q100 automotive qualified, making them suitable for various applications including power meters and microcontroller bias supply.
Manufacturer
Part #
Category
Microchip Technology KSZ8895 ConnectorsDescription
The Microchip Technology KSZ8895 EDS2 Daughter Card is designed for the evaluation of the KSZ8895 Gigabit Ethernet RGMII switch when used with an EDS2-compatible host board. It features a VXM7-9013-25M0000 crystal for 25MHz and a 24AA014H I2C serial EEPROM for board identification. This card includes a green LED indicator for the 1V2 power rail and test points for GPIOs, power rails, and GND.
Manufacturer
Part #
Category
Bosch BMI330 SensorsDescription
The Bosch BMI330 Shuttle Board 3.0 is a compact evaluation tool designed for the BMI330 Inertial Measurement Unit (IMU). It features a standardized footprint and supports I3C, I2C, and SPI communication interfaces, allowing for easy integration into custom hardware setups. This plug-and-play board is ideal for applications in industrial automation, robotics, and navigation.
Manufacturer
Part #
Category
Microchip Technology MIC4607A PowerDescription
The Microchip Technology MIC4607A MOSFET Driver Evaluation Board demonstrates the driver capabilities offered by the MIC4607A MOSFET driver. It drives up to a 20A peak current load and includes PWM signal test headers, a fault signal test header, and UVLO protections. This board is compatible with 3.3V and 5V logic level microcontrollers.
Manufacturer
Part #
Category
Microchip Technology MCP16367 PowerDescription
Microchip Technology MCP16367 Evaluation Board is designed to evaluate and demonstrate the features of the MCP16367 step-down DC-DC converters. This board features a 2.2MHz PWM switching frequency, internal soft start, internal compensation, internal current limit, and internal bootstrap diode. The MCP16367 evaluation board requires an external laboratory power supply and load.
Manufacturer
Part #
Category
Microchip Technology KSZ8795 EDS2 ConnectorsDescription
Microchip Technology KSZ8795 EDS2 Daughter Card is designed for evaluation of the KSZ8795CLX 10/100Mbit Ethernet switch when used with a Microchip EDS2 compatible host board. This card features a VXM7-9013-25M0000 crystal for 25MHz and an MDC/MDIO management interface. The KSZ8795 EDS2 card includes test points for GPIOs, power rails, and GND.
Manufacturer
Part #
Category
ams OSRAM GW Q9LR35.PM-M6N5-XX55-1 OptoelectronicsDescription
ams OSRAM OSCONIQ® S 5050 LEDs offer high efficacy performance with a 6V LED equipped with flip-chip technology. Designed with a 120° viewing angle, these LEDs provide enhanced light quality and are DLC premium lifetime certified for long-term reliability. Ideal for indoor, outdoor, and industrial lighting applications such as streetlights and floodlights.
Manufacturer
Part #
Category
Vishay / Dale IHXL1500VZ-31 PassivesDescription
Vishay / Dale IHXL1500VZ-31 Commercial Through-Hole Inductors handle high currents and feature a high-temperature rating of up to +155°C. They are designed with improved core material for a 20% reduction in core loss and provide excellent magnetic shielding. These inductors are suitable for applications such as high-current battery charging and brushless DC motors.
Manufacturer
Part #
Category
Microchip Technology EV13B92A SensorsDescription
The Microchip Technology EV13B92A Evaluation Kit is designed for evaluation and development of maXTouch applications using the automotive-qualified mXT3072M1 touchscreen controllers. It includes a 15.6” touchscreen assembly and various PCBs and cables for connectivity. This kit allows for easy testing and integration of touchscreen technology in automotive applications.
Manufacturer
Part #
Category
Chip Quik CQ-FE-1 PowerDescription
Chip Quik CQ-FE-1 Fume Extractors include 3 activated carbon filters, a power cord (USA), and an EU adapter. These fume extractors feature 100VAC to 240VAC voltage, 50/60Hz frequency, and 7W rated output power. The CQ-FE-1 fume extractors offer a maximum air flow range of 95CFM to 115CFM and are lead-free and RoHS 3/REACH compliant.
