Latest Components
Manufacturer
Part #
Category
Analog Devices Inc. ADG6404 SemiconductorsDescription
The Analog Devices ADG6404 Analog 4:1 Multiplexer switches one of four inputs to a common output, D, as determined by the 3-bit binary address line. It features low on-resistance and is compatible with multiple logic levels without requiring a separate digital supply. This multiplexer is ideal for applications in audio and video switching, instrumentation, and communication systems.
Manufacturer
Part #
Category
ROHM Semiconductor BV1LB050FPJ-C SemiconductorsDescription
The ROHM Semiconductor BV1LB050FPJ-C is an AEC-Q100 qualified switch with a typical on-state resistance of 50mΩ. It features a built-in active clamp function, dual thermal shutdown, and over current protection. This switch is ideal for automotive applications, driving resistive, inductive, and capacitive loads.
Manufacturer
Part #
Category
Analog Devices Inc. ADL8140-EVALZ PowerDescription
The Analog Devices ADL8140-EVALZ Evaluation Board is a 4-layer PCB designed for the ADL8140 Low Noise Amplifier. It features female coaxial 2.9mm connectors and is suitable for a wide operating temperature range of -55°C to +125°C. This board provides a thorough calibration path for accurate performance evaluation.
Manufacturer
Part #
Category
Analog Devices Inc. ADA4352-2 SemiconductorsDescription
The Analog Devices ADA4352-2 is a dual-channel programmable gain transimpedance amplifier designed for precise measurement of small currents across a wide dynamic range. It features programmable gain selections and operates over a temperature range of -40°C to +125°C, making it suitable for various applications. Its compact design reduces PCB area, providing an efficient solution for precision current measurement.
Manufacturer
Part #
Category
Analog Devices Inc. ADM2895E/ADM2895E-1 PowerDescription
The Analog Devices ADM2895E/ADM2895E-1 are half-duplex RS-485 transceivers featuring 5.7kV RMS isolation and ±60V fault protection. Designed for balanced transmission lines, they comply with ANSI/TIA/EIA-485-A-98 standards and include an integrated isolated DC-to-DC converter. These devices are suitable for applications requiring reinforced insulation and robust protection against transients.
Manufacturer
Part #
Category
Swissbit M1700 PassivesDescription
Swissbit M1700 embedded MultiMediaCards (eMMCs) are 4GB devices preconfigured in 100% pSLC mode, designed for long life cycles and high-demand applications. These non-volatile storage devices feature a single-chip MMC controller and a NAND flash memory chip in a compact BGA package. Ideal for industrial, IoT, and medical applications, they operate across a wide temperature range and comply with the JEDEC eMMC 5.1 standard.
Manufacturer
Part #
Category
BJB 46.480 E-CON ConnectorsDescription
BJB 46.480 E-CON Waterproof Terminal Blocks offer ingress protection ratings of IP66, IP67, and IP69 for reliable installation. Designed for energy-efficient operation, these terminal blocks feature quick connection and robust construction. They have a solid wire type with a 25mm housing hole diameter and a length of 104mm.
Manufacturer
Part #
Category
Nuvoton NUC980 PowerDescription
Nuvoton NUC980 32-bit Microprocessors are Arm926EJ-S™ processor Core with 16KB I-cache, 16KB D-cache, and MMU running up to 300MHz frequency. These microprocessors provide built-in SDRAM in an LQFP package and support a wide range of high-speed digital peripherals. Ideal for applications such as smart home gateways and fingerprint machines, they operate within an industrial temperature range of -40°C to 85°C.
Manufacturer
Part #
Category
ROHM Semiconductor BM6GD11BFJ-LB PowerDescription
The ROHM Semiconductor BM6GD11BFJ-LB 1-Channel Gate Driver with built-in isolation is designed for high-speed driving of GaN HEMTs. It features a 2500VRMS isolation voltage and a maximum input/output delay time of 60ns. This gate driver is ideal for applications in industrial equipment, AC adapters, and server power supplies.
Manufacturer
Part #
Category
EDATEC ED-MONITOR-070C / ED-MONITOR-101C PowerDescription
EDATEC ED-MONITOR Industrial Touchscreen Monitors are robust, high-performance display solutions designed for demanding industrial and commercial environments. Available in multiple sizes, these monitors feature high-resolution displays with capacitive multi-touch support, delivering vivid visuals and responsive user interaction. Ideal for applications such as industrial automation and IoT edge devices, they provide a seamless interface between users and machines.
