Latest Components
Manufacturer
Part #
Category
Syfer / Knowles X7R J-Lead MLCCs PassivesDescription
Syfer / Knowles X7R J-Lead Multilayer Ceramic Capacitors (MLCCs) are designed for enhanced performance under critical testing conditions such as mechanical vibration and thermal shock. They offer a capacitance range of 82nF to 1500nF and a rated voltage range of 1VDC to 630VDC. These capacitors are suitable for general-purpose and automotive applications, including battery management and electric vehicles.
Manufacturer
Part #
Category
Omron Electronics D2EW-R ConnectorsDescription
Omron Electronics D2EW-R Sealed Ultra-Subminiature Basic Switches with integrated resistors detect four different states in a circuit: OFF, ON, short-circuit, and disconnected. These switches are IP67-rated against water and dust, making them suitable for security applications and factory automation. Their ultra-small size and multi-angle operation enhance design flexibility.
Manufacturer
Part #
Category
TT Electronics FMW PassivesDescription
Welwyn / TT Electronics Fusible MELF Wirewound (FMW) Resistors are UL-recognised fusible wirewound resistors in SMD MELF format. They feature up to 1.7J withstand fast inrush energies and a 1W continuous power rating. Typical applications include power supplies, white goods controllers, and cordless product chargers.
Manufacturer
Part #
Category
TT Electronics HSMW0309-100RJT2 PassivesDescription
Welwyn / TT Electronics High Surge MELF Wirewound (HSMW) Resistors withstand up to 6.5J fast inrush energies with a 1W continuous power rating in a compact SMD MELF format. These surge tolerant resistors deliver up to 3.8kV of protection against 1.2µs/50µs lightning surges and feature failsafe mains fusing at 120VRMS/240VRMS. Typical applications include power supplies, white goods controllers, building control systems, and cordless product chargers.
Manufacturer
Part #
Category
ISSI IS25LP512MJ & IS25WP512MJ SemiconductorsDescription
The ISSI IS25LP512MJ and IS25WP512MJ Flash Memory Devices are versatile storage solutions designed for systems that require limited space, low pin count, and low power consumption. They feature a 4-wire SPI interface and support Double Transfer Rate (DTR) commands for efficient data transfer. With more than 20 years of data retention, these devices are ideal for various applications.
Manufacturer
Part #
Category
NXP Semiconductors S32E288-975EVB PowerDescription
NXP Semiconductors S32E288-975EVB Evaluation Board is designed to evaluate the performance of S32E2 high-performance real-time processors. It supports Electric Vehicles (xEV) and smart actuation, and is enabled with the GreenVIP vehicle integration software for development and prototyping. This board is ideal for automotive zone controllers and Hybrid Electric Vehicle (HEV) applications.
Manufacturer
Part #
Category
Qorvo ACT72350EVK1 PowerDescription
The Qorvo ACT72350EVK1 Evaluation Board is designed to evaluate ACT72350 160V 3-phase BLDC motor drivers. This gate driver is available in a compact 9mm x 9mm TQFN package and is optimized for driving medium voltage tri-phase BLDC/PMSM motors. It is suitable for various applications including power tools, garden tools, and electric vehicles.
Manufacturer
Part #
Category
ROHM Semiconductor LM2904 & LM2902 SemiconductorsDescription
ROHM Semiconductor LM2904 and LM2902 Ground Sense Operational Amplifiers (Op-Amps) are operable from almost GND level for both input and output. These Op-Amps are designed to operate on a single or dual power supply and feature a maximum junction temperature of 150°C. Typical applications include automotive electronics, consumer electronics, and active filters.
Manufacturer
Part #
Category
ROHM Semiconductor BD74C32FV-C SemiconductorsDescription
The ROHM Semiconductor BD74C32FV-C is designed for 1.65V to 5.5V power supply voltage operation. It features a low current consumption of 10µA and a maximum propagation delay of 12ns at 3V. This OR gate is ideal for automotive applications and comes in a compact SSOP-B14 package.
Manufacturer
Part #
Category
ROHM Semiconductor AG091FLD3HRBTL PowerDescription
ROHM Semiconductor Automotive 40A and 80A Power MOSFETs are N-channel and P-channel devices. These AEC-Q101 qualified MOSFETs feature low on-resistance and operate from -55°C to 175°C temperature range. They are ideal for ADAS, automotive, and lighting applications.
