Latest Components
Manufacturer
Part #
Category
Texas Instruments LM5137F-Q1-EVM12V PowerDescription
The Texas Instruments LM5137F-Q1-EVM12V Controller Evaluation Module (EVM) is designed to showcase the LM5137F-Q1 synchronous buck controller, intended for functional safety applications up to ASIL D. It operates as a two-phase interleaved design over an input voltage range of 36V to 72V, delivering a 12V regulated output at up to 20A. This evaluation module is fully assembled and tested, making it ideal for high-current automotive electronic systems.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVL8886-U-00A PowerDescription
The Monolithic Power Systems (MPS) EVL8886-U-00A Evaluation Board is designed to demonstrate the capabilities of the MP8886 synchronous step-down converters. It can achieve up to 3A of continuous output current for two channels or up to 6A for a single channel, with output voltage configurable between 0.6V and 24V. The board features a PMBus interface for advanced configuration and monitoring.
Manufacturer
Part #
Category
EPCOS / TDK HVC50 PowerDescription
The EPCOS / TDK HVC50 High-Voltage Gas-Filled Contactors are designed for high-voltage DC switching in harsh environments, with a maximum cut-off of 1000A at 1500V. These bidirectional contactors feature a dual coil and are RoHS compatible, operating in a temperature range of -40°C to +85°C. Ideal for applications such as traction battery systems and energy storage systems.
Manufacturer
Part #
Category
Texas Instruments F29H85X-SOM-EVM PowerDescription
The Texas Instruments F29H85X-SOM-EVM MCU Evaluation Board is designed for the TI C2000™ MCU series of F29H85x and F29P58x devices. This system-on-module design is ideal for initial evaluation and prototyping. The board requires the Texas Instruments XDS110ISO-EVM debug probe for evaluation, which is sold separately.
Manufacturer
Part #
Category
Amphenol / SV Microwave 137812729 ConnectorsDescription
Amphenol / SV Microwave Shielded Edge Launch Multiport PCB Connectors are high-frequency connectors featuring integrated EMI shielding to minimize interference and improve crosstalk isolation. They come in a multiport design with one, two, or four ports, enhancing board real estate efficiency while maintaining excellent electrical performance through 40GHz. These connectors are ideal for applications where signal integrity is critical, such as Mil-Aero, test and measurement, and high-speed digital systems.
Manufacturer
Part #
Category
TE Connectivity 192530992 ConnectorsDescription
TE Connectivity's BIOFUSE Bio Innovation Splice Sealing (BISS) and Bio Innovation Cap (BICAP) Heat Shrink Tubes and Caps are designed to reduce environmental impact while providing excellent sealing capabilities. These products offer strain relief and electrical insulation using a hot melt adhesive that prevents moisture ingress. Ideal for automotive and commercial transportation applications, they are made from a halogenated, highly flame-retardant material.
Manufacturer
Part #
Category
Texas Instruments HSS-HCS-BLANKEVM PowerDescription
Texas Instruments HSS-HCS-BLANKEVM Smart Fuse Daughter Card is designed to be used with the HSS-HCMOTHERBRDEVM, a smart fuse evaluation module. This combination of tools showcases the functionality of TI's smart fuse portfolio. It is useful for running destructive tests and compatible with any HCS high-side switch.
Manufacturer
Part #
Category
Broadcom HEDS-9930 SensorsDescription
Broadcom HEDS-9930 (E2/E2L) Evaluation Boards are designed to be used as a reference design for the AEDR-9930 encoder ASIC. These digital encoders provide two-channel quadrature digital outputs and a third-channel digital index output for motion control applications. Typical uses include closed-loop stepper motors, robotics, and portable medical equipment.
Manufacturer
Part #
Category
Broadcom HEDS-9930 SensorsDescription
Broadcom HEDS-9930 (E2/E2L) SPI Programming Kits are calibration kits designed for use with the HEDS-9930 (E2/E2L) evaluation boards. These boards serve as a reference design for the AEDR-9930 encoder ASIC. They are suitable for applications in robotics, industrial printers, and portable medical equipment.
Manufacturer
Part #
Category
Texas Instruments TPS2HC120EVM PowerDescription
The Texas Instruments TPS2HC120EVM Switch Evaluation Module (EVM) evaluates the functionality and performance of the TPS2HC120-Q1 high-side switch. This module is designed for testing and integration into various power system applications, featuring overcurrent and short detection capabilities. It operates within a voltage range of 3V to 28V and supports various applications including multichannel LED drivers and relay drivers.
