Latest Components
Manufacturer
Part #
Category
Texas Instruments LMR516x5 PowerDescription
Texas Instruments LMR516x5 Synchronous Buck Converters can drive up to 2.5A or 3.5A load current. With an input range of 4.3V to 60V, the devices are designed for various industrial applications requiring power conditioning from an unregulated source. The device features built-in protection and operates at 400kHz or 1.1MHz switching frequency for optimized design size.
Manufacturer
Part #
Category
Texas Instruments SN74AC139-Q1 SemiconductorsDescription
The Texas Instruments SN74AC139-Q1 Dual 2-to-4 Line Decoder/Multiplexer features dual two-to-four decoders with one active low-output strobe. It operates within a wide voltage range of 1.5V to 6V and is AEC-Q100 qualified for automotive applications. This component is ideal for memory device selection and reducing the number of outputs for chip-select applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC596/SN74AC596-Q1 SemiconductorsDescription
Texas Instruments SN74AC596/SN74AC596-Q1 SIPO Shift Registers contain an 8-bit, serial-in, parallel-out (SIPO) shift register that feeds an 8-bit D-type storage register. The devices are AEC-Q100 qualified for automotive applications and feature a wide operating range of 1.5V to 6V. They are designed to increase the number of outputs on a microcontroller and temporarily store up to 8 bits of data.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVL1608-TL-00A PowerDescription
The EVL1608-TL-00A Evaluation Board is designed to evaluate the MP1608 step-down switch-mode converter with built-in internal power MOSFETs. It can achieve up to 6A of continuous output current from a 2.4V to 5.5V input voltage range. This board is ideal for applications such as IP cameras, notebooks, and battery-powered devices.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EV5470B-L-00A PowerDescription
The Monolithic Power Systems (MPS) EV5470B-L-00A Evaluation Board is designed to evaluate the performance of the MP5470B power management solution, which integrates four high-efficiency, step-down DC/DC converters. It features Constant-on-Time (COT) control for fast transient response and includes full protection features such as Under-Voltage Lockout and Over-Current Protection. Ideal for applications like enterprise SSD and FPGA-based designs, this board supports a flexible power on/off sequence.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVQ6600L-R-00A PowerDescription
The Monolithic Power Systems (MPS) EVQ6600L-R-00A Evaluation Board is designed to evaluate the capabilities of the MPQ6600L-AEC1 stepper motor driver, which features a built-in micro-stepping translator. It operates from a supply voltage of up to 35V and can deliver motor currents of up to 1.5A. This evaluation board is suitable for applications involving bipolar stepper motors and printers.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVQ3438-QH-0000-00A PowerDescription
The EVQ3438-QH-0000-00A Evaluation Board is designed to evaluate the capabilities of the MPQ3438-0000, a 2.6MHz quasi-fixed frequency boost converter. It operates with a 0.8V to 10V input voltage range and supports a switching current limit up to 2A. This fully assembled board is ideal for automotive mechanical power supplies, LED drivers, and infotainment systems.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVL1608C-TL-00A PowerDescription
The EVL1608C-TL-00A Evaluation Board is designed to evaluate the MP1608C step-down switch-mode converter with built-in internal power MOSFETs. It can achieve up to 6A of continuous output current from a 2.4V to 5.5V input voltage range. This board is ideal for applications such as IP cameras, notebooks, and battery-powered devices.
Manufacturer
Part #
Category
Würth Elektronik WS-RSTV ConnectorsDescription
Würth Elektronik WS-RSTV Rocker Switches come in round and rectangular types and are highly durable against aging plastics. The standard round-type rocker switches are available with a transparent protection cover. These switches are suitable for power supplies, control panels, household appliances, vehicle electronics, and medical equipment.
Manufacturer
Part #
Category
Schneider Electric ATV320 PowerDescription
Schneider Electric Altivar™ Machine Drive ATV320 Solar Variable Speed Drives (VSDs) are designed for direct connection to solar cell power, powering motors from photovoltaic arrays without the need for stored energy solutions. The drive intelligently manages available power from the PV array to provide maximum output from the pump and can switch between power sources as needed. It is primarily designed for use with pumping systems, ensuring efficient operation even in varying conditions.
