Latest Components
Manufacturer
Part #
Category
Texas Instruments TPSM81033EVM-035 PowerDescription
Texas Instruments TPSM81033EVM-035 Evaluation Module (EVM) is designed to provide a quick setup to evaluate the TPSM81033 device with the output voltage set to 5V. The TPSM81033 is a synchronous boost module that offers a power supply design for portable equipment and smart devices powered by various batteries. It features a 5.5A (typ.) valley switch current limit over the full temperature range.
Manufacturer
Part #
Category
Bourns HRP3822x & HRP5022x PassivesDescription
Bourns HRP3822x and HRP5022x Power Inductors are through-hole inductors with shielded construction designed for low radiation. These inductors offer an inductance range of 0.68μH to 3.3μH, low DCR, and high heating currents up to 235A. They are suitable for industrial high current filters, high current battery charging, and DC-DC converters.
Manufacturer
Part #
Category
Analog Devices Inc. LT8615 PowerDescription
The LT8615 Monolithic Step-Down Switching Regulators are compact, high-efficiency synchronous regulators designed for ultralow EMI emissions. With a quiescent current of just 2.5µA in burst mode, they maintain high efficiency even at low load currents. These regulators are suitable for low EMI step-down applications in industrial and automotive settings.
Manufacturer
Part #
Category
Ka-Ro Electronics QSBASE5 PowerDescription
Ka-Ro Electronics QSBASE5 Evaluation Kit is used to demonstrate the performance of QSMP2 modules. This kit features dual 10/100 Ethernet, USB 2.0, LVDS display connector, MIPI camera connector, PCIe connector, and a USB Type-C® power supply. The QSBASE5 kit features two 80-pin connectors and an optional shielding cabinet for the socketed QS module.
Manufacturer
Part #
Category
Cree JB3030C OptoelectronicsDescription
Cree LED J Series® JB3030C 3‑V E and F Class Pro9™ White LEDs provide great value and high efficacy in low-density indoor lighting applications such as downlights, troffers, and panel lights. These LEDs deliver up to 15% higher efficacy for 90 CRI over standard version LEDs without compromising color rendering quality. The JB3030C features a typical thermal resistance of 4°C/W and is available in various ANSI CCTs from 6500K to 2700K.
Manufacturer
Part #
Category
Ka-Ro Electronics QSMP2 PowerDescription
The Ka-Ro Electronics QSMP2 Solder-Down Computer On Modules feature a dual Arm Cortex-A35 processor and support up to 60x 3.3V general purpose I/O. With 4GB eMMC ROM and 1GB LPDDR4 RAM, these industrial-grade modules are designed for basic computing node applications. They are pin-compatible with the QS family and support Linux OS.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EV2615D-Q-00A PowerDescription
The Monolithic Power Systems (MPS) EV2615D-Q-00A Lithium-Ion Battery Charger Evaluation Board is designed to demonstrate the capabilities of the MP2615D, a monolithic switching charger with integrated power MOSFETs for single-cell lithium-ion or lithium-polymer batteries. It achieves up to 2A of charge current and features internal reverse-blocking protection. The board size is 6.3cm x 6.3cm x 0.16cm.
Manufacturer
Part #
Category
Texas Instruments UCC33020-Q1 PowerDescription
The Texas Instruments UCC33020-Q1 Ultra-Small DC/DC Power Module is an automotive-qualified module designed to provide 1W of isolated output power with a 3V to 5.5V input voltage range. It features a 3kV RMS isolation rating and is available in a compact VSON package. This power module is ideal for applications such as Battery-Management Systems and isolated bias for sensors.
Manufacturer
Part #
Category
Cincon LFM550M PowerDescription
Cincon LFM550M Medical AC-DC Power Supplies with Power Factor Correction (PFC) are 550W highly efficient single-output AC/DC power modules that meet various medical standards. These compact modules are fully protected against short-circuit and over-voltage conditions. Ideal for medical lighting systems, CT scanning, and medical computers.
Manufacturer
Part #
Category
Cincon LFM550S PowerDescription
Cincon LFM550S AC-DC Power Supplies with Power Factor Correction (PFC) are 550W highly efficient single-output AC/DC power modules. These compact modules are fully protected against short-circuit and over-voltage conditions, making them extremely reliable. Ideal for automation equipment and network/telecom devices, these power supplies meet various international safety standards.
