Latest Components
Manufacturer
Part #
Category
DFRobot SEN0659 SensorsDescription
The DFRobot SEN0659 Industrial RS485 Infrared CO2 Sensor is a robust, high-accuracy device designed for measuring carbon dioxide concentrations from 400ppm to 5000ppm. Utilizing advanced non-dispersive infrared (NDIR) technology, it provides stable readings with ±50ppm accuracy. Its IP65-rated enclosure and RS485 communication make it suitable for various environmental and industrial applications.
Manufacturer
Part #
Category
Infineon Technologies TLE92102 PowerDescription
The Infineon Technologies MOTIX™ TLE92102 Multi MOSFET Gate Driver IC is an advanced gate driver with SPI interface dedicated to controlling up to four N-channel MOSFETs. It includes two half-bridges for DC motor control and is compliant with ISO 26262 (ASIL B). This driver is ideal for 12V safety motor drive applications such as seat controls and window lifts.
Manufacturer
Part #
Category
Espressif Systems ESP32 SemiconductorsDescription
Espressif Systems ESP32 Dual-Core Wi-Fi® Dual-Mode BLUETOOTH® SoCs are designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. They feature low-power characteristics and an adjustable-output power amplifier for optimal communication range and power consumption. The highly-integrated design minimizes PCB requirements while providing robust performance.
Manufacturer
Part #
Category
ams OSRAM AS7150 SensorsDescription
The ams OSRAM AS7150 Optical Force Sensing Analog Front End (AFE) is a low noise, high dynamic range proximity detection AFE optimized for optical force sensing applications. It features two low-noise ADC channels for simultaneous acquisition of two photodiodes and includes an integrated LED driver. This compact device is ideal for applications in mobile phones, tablets, smart glasses, and earbuds.
Manufacturer
Part #
Category
STMicroelectronics X-STM32MP-IGTW1 PowerDescription
The STMicroelectronics X-STM32MP-IGTW1 Expansion Board is designed for industrial IoT gateway applications, supporting key factory automation serial communication protocols like CAN bus and ModBus RTU. It features a power supply range of 12V to 24V and interfaces with the STM32MP microprocessor via a 40-pin GPIO connector. This board is compatible with the STM32MP257F-DK connector layout.
Manufacturer
Part #
Category
Phoenix Contact 1499528 PowerDescription
Phoenix Contact IPD Distribution Boards offer a simple, safe, and tool-free solution for power distribution in demanding installation environments. These boards feature H and Y distributors with a secure bayonet fast-locking system, ensuring reliable installation in challenging conditions. With high environmental protection ratings, they are ideal for applications requiring safe and efficient branching of power lines across infrastructure and industrial systems.
Manufacturer
Part #
Category
Phoenix Contact ECM UC SensorsDescription
Phoenix Contact ECM UC Current Measuring Transducers provide precise measurement and intuitive device configuration via web-based management. They detect AC, DC, and distorted currents from 0A to 100mA or 0A to 100A with a high measuring accuracy of <0.5%. The ECM UC is reliable at temperatures down to -40°C and installation altitudes of up to 4000m.
Manufacturer
Part #
Category
CTS Electronic Components Model 139 PowerDescription
CTS Electronic Components Model 139 Stratum 3E Low Noise Oven-Controlled Crystal Oscillators (OCXOs) are high-performance, small-size oscillators with high stability and low jitter/phase noise. These OCXOs feature a -170dBc/Hz phase noise floor, a 10MHz to 40MHz frequency range, and an operating voltage range of 3.3V or 5V. Typical applications include test and measurement, radar, telecom switching, and military communications.
Manufacturer
Part #
Category
Siretta Tango 60 ConnectorsDescription
The Siretta Tango 60 Indoor Ceiling DAS Antenna is a 4-port antenna designed for high-performance indoor wireless deployments across the 600MHz to 6000MHz frequency range. Its low-profile housing blends seamlessly into indoor environments while delivering strong RF performance. Ideal for enhancing signal capacity in demanding multi-user environments, it supports multiple frequency bands including 5G NR and Wi-Fi dual band.
Manufacturer
Part #
Category
DFRobot SEN0641 SensorsDescription
The DFRobot SEN0641 RS485 Photosynthetically Active Radiation (PAR) Sensor is a high-precision instrument designed to measure light within the 400nm to 700nm spectral range, essential for evaluating the radiation plants use during photosynthesis. It features a durable IP67-rated metal aluminum enclosure and supports a wide 5VDC to 30VDC power supply with RS485 communication. Ideal for agricultural research and environmental studies, it delivers precise PAR measurements to optimize plant growth conditions.
