Latest Components
Manufacturer
Part #
Category
DFRobot FIT0913 ConnectorsDescription
DFRobot FIT0913 PH2.0-3P Male-to-Male Cable (10-Pack) is designed for clean and secure connectivity. This cable features polarized 3-pin PH2.0 connectors on both ends, ensuring proper orientation and preventing reverse insertion. With a length of 200mm (7.87"), it offers flexibility for wiring across larger prototypes or modular setups.
Manufacturer
Part #
Category
DFRobot ST3215 PowerDescription
DFRobot ST3215 Serial Bus Servos feature a 12-bit high-precision magnetic encoder for 360° absolute positioning with a resolution of 0.088°. These servos are driven by a durable coreless motor and a high-strength metal gear train, making them ideal for complex robotic applications. They support multiple operating modes and allow daisy-chaining of up to 253 servos, simplifying wiring in multi-axis systems.
Manufacturer
Part #
Category
DFRobot 2804 PowerDescription
DFRobot 2804 3-Phase Brushless DC Motor is a compact 12V BLDC motor featuring a high-precision AS5600 encoder for advanced motion control. It operates at 2600 RPM and provides 300g.cm of torque, all within a space-saving aluminum frame. Ideal for robotics and camera gimbals, it supports I2C, PWM, and analog output interfaces for sophisticated control.
Manufacturer
Part #
Category
Infineon Technologies REF3K3W3LFCPSU PowerDescription
The Infineon Technologies REF3K3W3LFCPSU AC-DC Power Supply Reference Design is a 3.3kW high-frequency, high-density power supply unit designed for server telecom applications. It features a 3-level flying capacitor implemented with 400V CoolSiC for power factor correction and a high-frequency DC-DC converter. This design includes a baby-boost stage to meet hold-up time requirements.
Manufacturer
Part #
Category
Phoenix Contact PLCV8R/ETH-MP/BM ConnectorsDescription
The Phoenix Contact PLC-INTERFACE Ethernet Gateway Starter Kit is designed for modular remote relay systems supporting up to 56 I/O channels. It allows easy integration of relays into networks with high flexibility and intuitive configuration. The kit includes a plug-in base module with multi-protocol support and multiple relay terminals.
Manufacturer
Part #
Category
DFRobot RDK-X5 PassivesDescription
DFRobot RDK X5 Metal Heatsink Case is a full-metal enclosure engineered specifically for the RDK X5 AI board. This case acts as a durable protective shell and a passive heatsink, safeguarding the delicate internal components while ensuring optimal thermal performance. Ideal for applications in robotics and electronics competitions.
Manufacturer
Part #
Category
Analog Devices / Maxim Integrated ADPL40505A PowerDescription
The Analog Devices ADPL40505A Low-Dropout (LDO) Linear Regulator is a 5.5V, P-Channel MOSFET LDO that delivers up to 500mA of load current. It features a low-power mode that consumes very low quiescent current and provides protection against overcurrent and thermal overload. The device is available in an 8-pin TDFN package and offers an adjustable output voltage range of 0.8V to 5.0V.
Manufacturer
Part #
Category
Amphenol ACPA-D-Sub ConnectorsDescription
Amphenol Commercial D-Sub Cable Assemblies offer EMI/RFI shielding and a rugged design, making them ideal for environments where reliability and signal integrity are crucial. They feature a current rating of up to 3A and support various wire gauges, enabling flexibility in design. These connectors are suitable for a wide range of applications including data, communications, and medical instruments.
Manufacturer
Part #
Category
Abracon AB-RTC-XL PowerDescription
Abracon AB-RTC-XL Low-Power Real-Time Clocks (RTCs) are ultra-low-power RTC modules with an embedded 32.768kHz crystal oscillator. These devices utilize an I2C communication interface and maintain frequency accuracy (±20ppm at +25°C) in a compact 3.2mm x 1.5mm SMD package. Ideal for battery-powered IoT devices and smart home applications.
Manufacturer
Part #
Category
LEMO SP-IP68 ConnectorsDescription
LEMO SP Watertight IP68 Connectors feature FDA-certified PPSU construction, making them lightweight and durable, and they are fully compatible with repeated sterilization. With a single-shell design and multiple insert and contact options, these connectors provide maximum flexibility. They offer superior water and dust protection, making them suitable for medical devices, industrial equipment, and UAVs.
