Simplex SC APC to SC APC Fiber Optic Patch Cables

Introduction

L-Com Simplex SC APC to SC APC Fiber Optic Patch Cables are single-mode fiber assemblies designed for dependable optical signal connections. Built with OS2 9/125 µm fiber and angled physical contact SC connectors, these cables support low-loss, low-reflection fiber links in telecommunications, networking, and broadband infrastructure.

Part Description

These simplex patch cables feature an SC APC connector on each end, making them suitable for direct connections between compatible fiber optic ports, adapters, patch panels, optical splitters, and active network equipment.

Key characteristics include:

• Single-mode OS2 9/125 µm optical fiber
• SC APC connectors on both cable ends
• Simplex construction with one optical fiber path
• Yellow 2 mm protective cable jacket
• Typical insertion loss of 0.3 dB
• Return loss of 60 dB
• Available cable lengths from 1 m to 10 m
• Suitable for applications requiring controlled optical reflections

The APC connector polish uses an angled end face to reduce back reflection, which is especially valuable in high-performance single-mode fiber systems and passive optical networks.

Applications

Potential applications include:

• Fiber patch panel interconnections
• Optical network terminal connections
• Fiber-to-the-home network installations
• Passive optical network links
• Data center single-mode fiber patching
• Telecommunications equipment connections
• Fiber optic test and measurement setups
• Optical splitter and coupler connections
• Broadband distribution systems
• Long-distance network infrastructure

Industries

These fiber optic patch cables can be used in:

• Telecommunications
• Internet service providers
• Broadband network deployment
• Data centers
• Enterprise networking
• Cable television infrastructure
• Utilities and smart-grid communications
• Transportation communications
• Industrial networking
• Research laboratories and test facilities

Usage Ideas

1. FTTH Demarcation Connection
   Connect an optical network terminal to a fiber wall outlet or distribution box in a residential or commercial fiber-to-the-home installation.

2. Fiber Patch Panel Link
   Use the cable to patch a single-mode port on a fiber distribution panel to an SC APC-equipped network device or optical splitter.

3. Optical Test Bench Setup
   Create a low-reflection connection between a single-mode light source, attenuator, coupler, or optical power meter during fiber system testing.

Conclusion

L-Com Simplex SC APC to SC APC Fiber Optic Patch Cables provide a practical single-mode fiber connection solution for installations that require low insertion loss and strong return-loss performance. With OS2 9/125 µm fiber, SC APC terminations, and lengths from 1 m to 10 m, they are well suited to telecommunications, PON, broadband, data networking, and optical test applications.