Latest Components
Manufacturer
Part #
Category
Simpson Electric Company 260-8P PowerDescription
Rugged, compact analog volt-ohm meter for measuring AC and DC voltage, current, resistance, decibels, and output voltage. Features a lighted mirrored dial, LED and audible continuity indicator, overload protection, rechargeable USB lighting, and a durable phenolic case.
Manufacturer
Part #
Category
Panasonic Industry HE-S SC-Type (AHES3591, AHES3592, AHES4591, AHES4592) PowerDescription
Panasonic Industry HE-S SC-Type power relays provide 40A switching at up to 480VAC in a compact PCB-mountable package. They offer 2 Form A or 2 Form A 1 Form B contact arrangements, 12VDC or 24VDC coils, mirror-contact monitoring, and low 400mW holding power for EV charging, renewable energy, and industrial applications.
Manufacturer
Part #
Category
STMicroelectronics STEVAL-PDUBV1 PowerDescription
The STEVAL-PDUBV1 is an automotive power distribution electronic control unit based on the SPC58NG84E7 MCU and STi²Fuse devices. It provides two independent 12V power rails with 13 protected output channels per rail and supports intelligent distribution of power to automotive loads.
Manufacturer
Part #
Category
STMicroelectronics AEK-POW-PDUMINI PowerDescription
The AEK-POW-PDUMINI is a compact automotive power distribution unit board for managing and protecting low-voltage 12V and 48V vehicle power systems. It uses eFuse-protected high-side drivers, SPI control, standby power management, and CAN-FD wake-up functionality to distribute power closer to vehicle loads.
Manufacturer
Part #
Category
STMicroelectronics AEK-MOT-8DCMH98 PowerDescription
The STMicroelectronics AEK-MOT-8DCMH98 is a DC motor driver board based on the L99MH98 octal half-bridge predriver. It drives eight configurable half-bridge channels or four full-bridge channels, supporting up to 15A per channel in half-bridge mode and 30A per channel in full-bridge mode. The board provides current measurement, SPI diagnostics, supply monitoring, and automotive protection features.
Manufacturer
Part #
Category
MEAN WELL MSP-1600 PowerDescription
The MEAN WELL MSP-1600 is a 1600W enclosed AC/DC power supply with power factor correction, programmable output voltage, CANBus communication, remote control, remote sensing, and an auxiliary 12VDC output. It accepts 85VAC to 264VAC input and is available with 12V, 24V, 36V, or 48V outputs. Integrated protections include short circuit, overload, overvoltage, and overtemperature protection.
Manufacturer
Part #
Category
STMicroelectronics EVL9965A/EVL99BM218 PowerDescription
Evaluation boards integrating the L9965 battery management system device for monitoring, balancing, and protecting Li-Ion and Li-Polymer battery packs. The kit supports up to 18 cells in series and provides high-precision cell voltage, stack voltage, busbar voltage, and temperature measurements. It includes an expansion board, load board, GUI support, and interfaces for evaluating automotive and energy storage battery management applications.
Manufacturer
Part #
Category
Infineon Technologies DEMO_HV_PACKAGE PowerDescription
The Infineon Technologies DEMO_HV_PACKAGE Evaluation Board enables efficient integration of bottom- and top-side cooled power packages. It features an optimized half-bridge design, improved power loop, innovative cooling concepts, Kelvin source pin, and reduced stray inductance for high-performance power applications.
Manufacturer
Part #
Category
STMicroelectronics EVL9965C-L/EVL99BM2C-L PowerDescription
Evaluation boards integrating the L9965C or L99BM2C for monitoring current, charge, and isolation in high-voltage battery packs. The boards support isolated daisy-chain communication, dual redundant current sensing, analog input channels, gate pre-driver outputs, and optional SPI connectivity for battery management system evaluation.
Manufacturer
Part #
Category
STMicroelectronics EVL9965T/EVL99BM2T PowerDescription
Evaluation boards integrating the L9965T or L99BM2T dual-die bidirectional SPI BMS transceiver for communication between isolated voltage domains over a twisted-pair connection. The boards include an onboard CAN transceiver, integrated LDO regulator, status LEDs, and GUI support for configuration and evaluation. They are designed for automotive battery monitoring systems, energy storage systems, and UPS applications.
