Latest Components
Manufacturer
Part #
Category
Semtech RClamp10022PWQ SemiconductorsDescription
Semtech RClamp®10022PWQ Transient Voltage Suppressor (TVS) is designed for ESD protection of 100BASE-T1 and 1000BASE-T1 interfaces in automotive environments. This two-line suppressor utilizes silicon avalanche technology for excellent ESD and TLP clamping performance. It offers a ±15kV contact rating and ±25kV air discharge protection per IEC 61000-4-2.
Manufacturer
Part #
Category
Coto Technology CT04 SemiconductorsDescription
Coto Technology CT04 Reed Relays are overmolded, mini dry reed switches designed for SMD mounting. These relays are single-pole, single-throw (SPST) types with normally open ruthenium contacts. They are suitable for proximity sensing, hearing aids, pulse counters, and medical applications.
Manufacturer
Part #
Category
Murata Electronics SCH16T-K10-PCB SensorsDescription
Murata Electronics SCH16T-K10-PCB Sensor Board features the SCH16T-K10 gyroscope and accelerometer pre-mounted on the PCB for evaluation purposes. This sensor board offers SPI communication from pins and includes extensive self-diagnostics. It is designed for high-performance applications with a SafeSPI v2.0 interface.
Manufacturer
Part #
Category
Texas Instruments bq25186 PowerDescription
The Texas Instruments bq25186 Linear Battery Charger IC focuses on a small solution size and low quiescent current to extend battery life. It supports up to 1A charging and system loads of up to 3A, making it ideal for various applications. The device is optimized for battery-to-battery charging and integrates features for thermal regulation and fault protection.
Manufacturer
Part #
Category
Texas Instruments LMR516x5 PowerDescription
Texas Instruments LMR516x5 Synchronous Buck Converters can drive up to 2.5A or 3.5A load current. With an input range of 4.3V to 60V, the devices are designed for various industrial applications requiring power conditioning from an unregulated source. The device features built-in protection and operates at 400kHz or 1.1MHz switching frequency for optimized design size.
Manufacturer
Part #
Category
Texas Instruments SN74AC139-Q1 SemiconductorsDescription
The Texas Instruments SN74AC139-Q1 Dual 2-to-4 Line Decoder/Multiplexer features dual two-to-four decoders with one active low-output strobe. It operates within a wide voltage range of 1.5V to 6V and is AEC-Q100 qualified for automotive applications. This component is ideal for memory device selection and reducing the number of outputs for chip-select applications.
Manufacturer
Part #
Category
Texas Instruments SN74AC596/SN74AC596-Q1 SemiconductorsDescription
Texas Instruments SN74AC596/SN74AC596-Q1 SIPO Shift Registers contain an 8-bit, serial-in, parallel-out (SIPO) shift register that feeds an 8-bit D-type storage register. The devices are AEC-Q100 qualified for automotive applications and feature a wide operating range of 1.5V to 6V. They are designed to increase the number of outputs on a microcontroller and temporarily store up to 8 bits of data.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVL1608-TL-00A PowerDescription
The EVL1608-TL-00A Evaluation Board is designed to evaluate the MP1608 step-down switch-mode converter with built-in internal power MOSFETs. It can achieve up to 6A of continuous output current from a 2.4V to 5.5V input voltage range. This board is ideal for applications such as IP cameras, notebooks, and battery-powered devices.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EV5470B-L-00A PowerDescription
The Monolithic Power Systems (MPS) EV5470B-L-00A Evaluation Board is designed to evaluate the performance of the MP5470B power management solution, which integrates four high-efficiency, step-down DC/DC converters. It features Constant-on-Time (COT) control for fast transient response and includes full protection features such as Under-Voltage Lockout and Over-Current Protection. Ideal for applications like enterprise SSD and FPGA-based designs, this board supports a flexible power on/off sequence.
Manufacturer
Part #
Category
Monolithic Power Systems (MPS) EVQ6600L-R-00A PowerDescription
The Monolithic Power Systems (MPS) EVQ6600L-R-00A Evaluation Board is designed to evaluate the capabilities of the MPQ6600L-AEC1 stepper motor driver, which features a built-in micro-stepping translator. It operates from a supply voltage of up to 35V and can deliver motor currents of up to 1.5A. This evaluation board is suitable for applications involving bipolar stepper motors and printers.
