Latest Components
Manufacturer
Part #
Category
Qorvo QPL1825 SemiconductorsDescription
The Qorvo QPL1825 GaAs pHEMT CATV Amplifier is a highly linear differential RF amplifier designed for broadband CATV DOCSIS 4.0 systems. It features a cascode architecture that provides 25.5dB of gain with low distortion across a frequency range of 50MHz to 1.8GHz. This compact amplifier operates on an 8V supply and is suitable for various applications including nodes, line amplifiers, and cable modems.
Manufacturer
Part #
Category
Analog Devices Inc. ADRF6780 SemiconductorsDescription
The ADRF6780 Microwave Upconverters are based on Silicon Germanium (SiGe) and operate over a wideband frequency range of 5.9GHz to 23.6GHz. They offer two upconversion modes: direct conversion from baseband I/Q to RF and Single-Side-Band (SSB) upconversion from real Intermediate Frequency (IF). This compact upconverter is ideal for applications such as microwave radios, radar, and electronic warfare systems.
Manufacturer
Part #
Category
onsemi FAD1100-F085 SemiconductorsDescription
The onsemi FAD1100-F085 Ignition Gate Drive IC is designed to directly drive ignition IGBTs while managing coil current and spark events. It features a programmable input current and an internal spike filter for reliable operation. This device is ideal for automotive ignition systems requiring compact size and high performance.
Manufacturer
Part #
Category
Renesas Electronics RA0E3 SemiconductorsDescription
The Renesas Electronics RA0E3 General Purpose Microcontrollers are part of the entry-level, low-end RA0 series. They integrate an Arm Cortex-M23 core with low power and peripherals optimized for BOM cost reduction and a simple design. Ideal for applications requiring a low pin count, they support a wide operating voltage range and temperature range.
Manufacturer
Part #
Category
Texas Instruments TCAN1473A-Q1 SemiconductorsDescription
The TCAN1473A-Q1 is a signal-improvement-capable CAN FD transceiver with sleep mode, designed to meet ISO 11898-2:2024 requirements. It features a Sleep Wake Error timer for safe transitions to sleep mode and supports level-shifting I/O from 1.7V to 5.5V. This AEC-Q100 qualified IC is ideal for various automotive applications including body electronics and Advanced Driver Assistance Systems.
Manufacturer
Part #
Category
Texas Instruments TLV904xD SemiconductorsDescription
Texas Instruments TLV904xD Operational Amplifiers are low-power, rail-to-rail input and output op-amps designed for high-gain, battery-powered applications. They operate from ultra-low 1.2V supplies to 5.5V rails, making them ideal for portable electronics and other applications. With a wide temperature range of -40°C to 125°C, these Op-Amps are suitable for various demanding environments.
Manufacturer
Part #
Category
Diotec Semiconductor SL1MR13 SemiconductorsDescription
The Diotec Semiconductor SL1MR13 Standard Recovery Rectifier features a 1000V repetitive peak reverse voltage and a maximum average forward rectified current of 1A at 50°C. It is designed for applications such as main rectification power supplies and polarity protection. This rectifier is AEC-Q101 compliant and comes in a compact SOD-123FL package.
Manufacturer
Part #
Category
Diotec Semiconductor BZX84B4V3-AQ SemiconductorsDescription
The Diotec Semiconductor BZX84B4V3-AQ Zener Diode features a 4.3V nominal Zener voltage with ±2% tolerance and a low leakage current of 3μA at 1V. It offers a power dissipation of 300mW and is housed in a compact SOT-23 surface-mount package. This diode is ideal for voltage stabilization and is AEC-Q101 qualified.
Manufacturer
Part #
Category
Texas Instruments THS4535 SemiconductorsDescription
The Texas Instruments THS4535 is a high-precision, 60MHz fully differential amplifier designed to drive ADCs up to 2MSPS. It offers superior performance over traditional dual op amps with higher bandwidth and better phase balance. This amplifier operates in a temperature range of -40°C to 125°C, making it ideal for various applications including differential active filters and motor drives.
Manufacturer
Part #
Category
Diotec Semiconductor GBI40M-T SemiconductorsDescription
The Diotec Semiconductor GBI40M-T Single Phase Bridge Rectifier is equipped with four diodes in a bridge configuration and is protected against reverse assembly. It features a 1000V reverse voltage, 700V input voltage, and a 70A repetitive peak forward current. This bridge rectifier is suitable for applications such as 50Hz/60Hz rectification and power supplies.
