Latest Components
Manufacturer
Part #
Category
STMicroelectronics STM6322 SemiconductorsDescription
The STM6322 is a microprocessor supervisory circuit that monitors supply voltage and provides a reset output during power-up, power-down, and brownout conditions. It features a precision voltage reference, watchdog timer, and manual reset input. The device is available in a compact 5-pin SOT23 package.
Manufacturer
Part #
Category
STMicroelectronics STC3117 SemiconductorsDescription
The STC3117 is a gas gauge IC featuring the patented OptimGauge algorithm for accurate battery state-of-charge monitoring and battery charger control. It provides robust battery health tracking, programmable alarms, and internal temperature sensing for handheld applications. The device is optimized for low power consumption and includes detection for missing or swapped batteries.
Manufacturer
Part #
Category
STMicroelectronics STR485E SemiconductorsDescription
The STR485E is a low power differential line transceiver designed for RS485 applications in half-duplex mode. It supports data and enable signals compatible with 1.8V or 3.3V supplies and offers selectable data rates up to 20 Mbps or 250 kbps. The device features thermal shutdown protection and a fail-safe receiver for enhanced reliability.
Manufacturer
Part #
Category
STMicroelectronics L6364 SemiconductorsDescription
The L6364 is a dual channel transceiver IC designed for industrial sensor applications, supporting the IO-Link standard. It acts as a bridge between a microcontroller and a 24 V supply and signaling cable, offering robust protection and configurable features. The device is suitable for harsh industrial environments and supports both SIO and IO-Link communication.
Manufacturer
Part #
Category
STMicroelectronics L6362A SemiconductorsDescription
The L6362A is an IO-Link and SIO mode transceiver device compliant with PHY2, supporting COM1, COM2, and COM3 communication modes. It features selectable output stages, robust protection against reverse polarity, short-circuit, and overvoltage, and is suitable for driving resistive, capacitive, and inductive loads in industrial environments. The device is ideal for interfacing sensors and actuators with industrial control systems.
Manufacturer
Part #
Category
STMicroelectronics L6360 SemiconductorsDescription
The L6360 is a monolithic IO-Link master port transceiver IC, compliant with PHY2 and supporting COM1, COM2, and COM3 communication modes. It features programmable output stages, integrated protection mechanisms, and diagnostic capabilities via I2C. Designed for industrial IO-Link master applications, it offers robust communication and load driving capabilities.
Manufacturer
Part #
Category
STMicroelectronics TSB712 SemiconductorsDescription
The TSB712 is a precision, rail-to-rail input and output operational amplifier with a 6 MHz bandwidth and wide supply voltage range from 2.7 V to 36 V. It features low offset voltage, low noise, and an integrated EMI filter, making it ideal for applications such as filters, power supply and motor control, and sensor interfacing. Its robust design supports automotive-grade requirements and extended temperature operation.
Manufacturer
Part #
Category
STMicroelectronics TSC200, TSC201, TSC202 SemiconductorsDescription
The TSC200, TSC201, and TSC202 are high-side current sense amplifiers with wide common-mode voltage range from -16V to +80V and integrated open-drain comparator. They offer selectable amplification gains and feature an internal voltage reference, making them ideal for precise current measurement in automotive and industrial applications. These devices operate from a 2.7V to 18V supply and are AEC-Q100 qualified.
Manufacturer
Part #
Category
STMicroelectronics TSV7722 SemiconductorsDescription
The TSV7722 is a high bandwidth (22 MHz), low offset (200 μV max) operational amplifier optimized for low-side current measurements and sensor interfaces. It features rail-to-rail output, low input bias current, and operates from a 1.8 V to 5.5 V supply. This op amp is ideal for high-accuracy, high-bandwidth signal conditioning applications.
Manufacturer
Part #
Category
STMicroelectronics TSV772 & TSV774 SemiconductorsDescription
The TSV772 and TSV774 are high bandwidth (20 MHz), low offset (200 µV max) operational amplifiers with rail-to-rail input and output. They are ideal for precision low-side current measurement and signal conditioning for high frequencies. These op-amps operate from a 2.0 V to 5.5 V supply and are unity-gain stable.
