News | The Component Club

Rohde & Schwarz Extends ZNB3000 Vector Network Analyzer Range to 54 GHz

The R&S ZNB3000 now covers up to 54 GHz, enabling PCIe 7.0, 50 GHz Ethernet, 6G, and SatCom testing with industry-leading speed and dynamic range.

rohde & schwarz, znb3000, vna, vector network analyzer, signal integrity, pcie 7.0, 6g, satcom, high-speed interconnects, test & measurement

Samtec’s 0.80 mm Edge-Card Sockets Target High-Speed Modular Designs

Samtec’s HSEC8 0.80 mm edge-card sockets use machined contacts to support high-speed, high-cycle modular systems.

Samtec, HSEC8, Generate series, edge card socket, 0.80 mm pitch, Edge Rate contact, high speed connector, signal integrity, modular systems, right angle connector, vertical connector, edge mount, power signal combo, PCB connector, datacom, telecom equipment, instrumentation, industrial electronics

Keysight XR8 Scope Architecture Pushes High Speed Validation Forward

Keysight’s Infiniium XR8 oscilloscope introduces a new front end with integrated ADC and DSP processing, reducing noise, accelerating compliance testing, and improving workflow efficiency for high speed digital validation.

Keysight, Infiniium XR8, oscilloscope, high speed digital, signal integrity, jitter analysis, USB4v2 testing, DisplayPort 2.1, DDR5 validation, ADC design, DSP engine, compliance testing, electronic design, measurement tools, test and measurement, lab workflow

Molex Impress Moves 224G Links Onto the ASIC Substrate

Molex launches Impress Co-Packaged Copper, a compression-attached substrate connector delivering 224G PAM-4 near-ASIC connectivity to reduce PCB loss and support next-generation AI and hyperscale data center architectures.

Molex, Impress Co-Packaged Copper, co-packaged optics, co-packaged copper, 224G PAM-4, near ASIC connectivity, high-speed interconnect, data center networking, AI accelerators, hyperscale architecture, substrate connector, compression connector, SerDes, 3.2T networking, signal integrity, PCB loss reduction, high-density server design

Diodes PI2MEQX2505Q Improves MIPI D-PHY Signal Integrity In High Resolution Automotive Cameras

Diodes PI2MEQX2505Q restores MIPI D PHY signaling for high resolution automotive camera and ADAS systems with configurable equalization and low power modes.

Diodes Incorporated, PI2MEQX2505Q, ReDriver IC, MIPI D PHY, CSI2, DSI, signal integrity, equalization, pre emphasis, low power modes, automotive cameras, ADAS, high speed links, differential signaling, PCB routing, semiconductor, signal conditioning, camera systems, BEV electronics

Diodes Rolls Out Compact HDMI 2.1 ReDrivers with 8K and DDC Listener

Diodes launches the PI3HDX12311 and PI3HDX6311 HDMI ReDrivers for 8K video, with DDC Listener, trace cancellation, and compact footprint.

diodes, hdmi, redriver, pi3hdx12311, pi3hdx6311, signal integrity, ddc listener, 8k video, tmds, frl, displayport, embedded design, consumer electronics

Samtec Introduces Bulls Eye® ISI Evaluation Boards for Simplified SerDes Testing

Samtec’s new Bulls Eye ISI Evaluation Boards support 70 GHz and 90 GHz SerDes testing, streamlining multi-lane validation across PAM4 and PAM6 designs.

Samtec, SerDes testing, Bulls Eye, ISI evaluation board, high speed interconnect, signal integrity, PAM4, PAM6, TDR, BERT, VNA, PCB test, compression interface, 70 GHz testing, 90 GHz SerDes

Samtec AcceleRate Slim Cables Add More Flexible Signal Routing

Samtec’s AcceleRate Slim ARC6 cable assemblies now include single-ended and mixed-signaling options, extending their use in dense computing, FPGA prototyping, emulation, and MIPI systems while retaining the narrow body and direct-attach cable architecture.

Samtec, AcceleRate Slim, ARC6, ARF6, cable assembly, high-speed cable, mixed signaling, single-ended signaling, differential pair, FPGA prototyping, FPGA emulation, MIPI, 64 Gbps PAM4, PCIe 6.0, CXL 3.2, Eye Speed cable, Flyover cable, micro coax, twinax, signal integrity

Toshiba expands digital isolators for stable industrial control

Toshiba adds new dual channel digital isolators with high CMTI and low delay to improve signal reliability in noisy industrial environments.

toshiba, dcl52xx00, digital isolator, magnetic coupling, cmti, isolated uart, industrial automation, signal integrity, propagation delay, noise immunity, real time control, isolation barrier, power electronics

Diodes Introduces Tiny eUSB2-to-USB 2.0 Repeaters for Compact Embedded Systems

Diodes Incorporated releases compact eUSB2-to-USB 2.0 repeaters for signal reliability in space-constrained embedded electronics and consumer devices.

diodes incorporated, pi3eusb1100, pi3eusb1101, eusb2, usb 2.0, repeater ic, signal integrity, i2c configuration, embedded systems design, portable electronics, wlcsp, usb type c, pcb layout, channel loss compensation, power-efficient interface

Rohde & Schwarz Extends ZNB3000 Vector Network Analyzer Range to 54 GHz

Samtec’s 0.80 mm Edge-Card Sockets Target High-Speed Modular Designs

Keysight XR8 Scope Architecture Pushes High Speed Validation Forward

Molex Impress Moves 224G Links Onto the ASIC Substrate

Diodes PI2MEQX2505Q Improves MIPI D-PHY Signal Integrity In High Resolution Automotive Cameras

Diodes Rolls Out Compact HDMI 2.1 ReDrivers with 8K and DDC Listener

Samtec Introduces Bulls Eye® ISI Evaluation Boards for Simplified SerDes Testing

Samtec AcceleRate Slim Cables Add More Flexible Signal Routing

Toshiba expands digital isolators for stable industrial control

Diodes Introduces Tiny eUSB2-to-USB 2.0 Repeaters for Compact Embedded Systems

Latest News

Information

Manage

Enquire